5mm Locking Shelf Support Double Pin, White

5mm Locking Shelf Support Double Pin For Cabinets

5mm locking shelf support double pin from Hardware Concepts, Inc. uses a unique double lock design that accepts, supports, and locks 3/4 inch and 1 inch thick shelves, so one part handles both common shelf thicknesses across a run. The support uses dual 5 mm and 1/4 inch diameter pins set 32 mm center-to-center, matching standard 32 mm system drilling so it drops into established line-bore patterns without layout changes. The shelf rest area measures 1 inch long by 1/2 inch wide, giving the shelf a defined bearing surface to sit on. This version is made in white plastic, providing a neutral, clean look that blends with light-colored casework while the locking function holds the shelf in place during normal use.

Key Shelf Support Details For Real Jobs

• The unique double lock design accepts, supports, and locks 3/4 inch and 1 inch thick shelves, so installers can use the same support for both panel thicknesses on a project and keep shelf positions consistent.
• Dual 5 mm and 1/4 inch diameter pins are spaced 32 mm center-to-center, which aligns with standard 32 mm cabinet drilling patterns and allows quick installation into existing shelf pin rows without re-drilling.
• The 1 inch long by 1/2 inch wide shelf rest area provides a defined contact surface for the shelf edge, helping distribute load over the support area and aiding alignment along the cabinet side.
• ANSI/BHMA tested and certified performance means the shelf support has been evaluated to an industry standard, giving a predictable baseline for how it behaves in typical cabinet and shelving applications.
• The white plastic body presents a neutral appearance against white or light-colored interiors, helping the support visually recede so attention stays on the finished shelving rather than the hardware.

Mounting And Fit Details For This Shelf Support

This 5mm white double pin shelf support uses dual 5 mm and 1/4 inch diameter pins at 32 mm center-to-center, so it seats into matching holes in cabinet sides drilled on the 32 mm system. The installer engages both pins to stabilize the support in the panel, which helps resist twisting in the vertical row. With the shelf rest area sized at 1 inch long by 1/2 inch wide, the shelf edge lands on a predictable ledge, simplifying layout when repeating shelf heights across multiple cabinets. The locking design then secures either a 3/4 inch or 1 inch thick shelf, so once holes are drilled to the 32 mm spacing, the same support handles both thickness options without changing hardware.

Using This Shelf Support In Cabinet Projects

Where This Dual Pin Shelf Support Is Applied

This dual pin shelf support is used in shelf, closet, and garage organization projects where 5 mm and 1/4 inch pins in a 32 mm center-to-center layout are standard, so it fits into established system cabinetry. Because the double lock design accepts 3/4 inch and 1 inch thick shelves, the same part serves in cabinet interiors built from either panel thickness, which is common in closets and storage runs. The 1 inch by 1/2 inch shelf rest area defines where the shelf edge lands, which helps keep shelves level and aligned from cabinet to cabinet along a wall. The white plastic finish suits white and other light interior finishes, so the hardware stays visually quiet inside the cabinet while still doing its job.

Why These Shelf Support Details Matter On Site

The dual 5 mm and 1/4 inch pins at 32 mm center-to-center let this ANSI/BHMA tested and certified shelf support work directly with 32 mm drilled rows, reducing layout time when installing runs of adjustable shelves. Using both pin diameters in one component also stabilizes the support in the vertical line of holes, which helps keep the shelf rest area square to the cabinet side. The double lock design that accepts, supports, and locks 3/4 inch and 1 inch thick shelves allows an installer to carry one style of support for both thicknesses, simplifying ordering and jobsite inventory. The 1 inch long by 1/2 inch wide shelf rest concentrates the contact where the shelf meets the support, which helps position the shelf repeatably at each corner. With the white plastic body, the support blends into light-colored cabinetry so the visual focus remains on the shelving while the hardware quietly maintains the shelf position during everyday use.

Common Questions About This Shelf Support

Selecting This Shelf Support For Your Project

This 5mm and 1/4 inch pin shelf support from Hardware Concepts, Inc. combines a unique double lock design for 3/4 inch and 1 inch shelves with 32 mm center-to-center spacing, so it aligns with standard system drilling while covering the two common shelf thicknesses in one part.