Berenson Andante 2-1/2" (64 mm) Center to Center Antique Pewter Cup Pull, 3012-1AP-P

Berenson Andante Antique Pewter Cup Pull Details

Berenson Andante antique pewter cup pull gives cabinets a defined hand grip with a classic cup profile, so doors and drawers open with a solid, positive feel. The 2-1/2 inch (64 mm) center to center dimension sets the mounting holes, which helps align drilling layouts and jigs across multiple fronts. The zinc die cast material forms a rigid pull body, which supports repeated use on active kitchen or shop cabinets. The antique pewter finish defines the visual tone, which helps match other antique pewter decorative hardware in the same run. The 4-1/16 inch overall length establishes edge clearances, which matters when laying out pulls near panel transitions or adjacent walls. A 1 inch projection sets how far the pull stands off the surface, providing finger clearance while keeping the profile tight to the face. The 1-1/4 inch width defines its vertical footprint, guiding spacing between stacked drawers.

Key Andante Cup Pull Details For Projects

• The 2-1/2 inch (64 mm) center to center dimension fixes hole spacing, which simplifies repeat drilling and makes layout consistent on banks of drawers.
• The 4-1/16 inch length establishes end-to-end size, which helps verify clearance from door and drawer edges during planning.
• The 1 inch projection sets stand-off from the surface, which provides finger room while keeping the pull close to the cabinet face.
• The 1-1/4 inch width defines face coverage, which helps align pulls to rail heights and drawer fronts without crowding trim.
• The antique pewter finish sets the color and sheen, which supports coordinating with other antique pewter handles and pulls in the space.
• The zinc die cast material forms a solid body, which supports the pull under regular door and drawer operation.

Andante Cup Pull Sizing, Mounting, And Fit

The 2-1/2 inch (64 mm) center to center mounting on this Andante cup pull locates the screw holes, which guides drill bit placement for both new work and straightforward repeat installations. The 4-1/16 inch overall length defines the footprint across the drawer or door, which matters when balancing the pull on narrow or wide fronts. With a 1 inch projection, the pull stands off the surface enough for a comfortable grip while staying compact for tight clearances. The 1-1/4 inch width determines how much rail height it occupies, helping with vertical alignment in stacked drawer layouts. The zinc die cast construction provides a stable mounting structure, which supports the pull when tightened against wood or composite cabinet materials.

Using This Berenson Cup Pull In Cabinet Runs

Where The Antique Pewter Cup Pull Fits Best

This Berenson Andante Series cup pull, with its 2-1/2 inch (64 mm) center to center dimension, suits cabinet layouts built around that common spacing, which streamlines planning across an entire room. The 4-1/16 inch overall length works on many standard drawer widths, which helps maintain visual balance from small to medium drawer faces. Its 1-1/4 inch width aligns well with typical rail sizes, which lets the pull sit fully on the rail without overhanging profiles. The antique pewter finish ties into antique pewter decorative hardware, which supports a unified look on doors, drawers, and other handles in the same finish. Zinc die cast construction gives the pull a defined shape, which keeps lines consistent when installed in long banks of cabinetry.

Details That Support Repeatable Cabinet Results

The defined 2-1/2 inch (64 mm) center to center spacing allows installers to use fixed jigs, which speeds drilling and keeps hole locations consistent from cabinet to cabinet. The 4-1/16 inch length offers a known reference for positioning away from panel edges, which reduces layout adjustments and rework on site. The 1 inch projection keeps the gripping area predictable, which helps set doors and drawers so the pull does not interfere with adjacent fronts. A 1-1/4 inch width gives a precise vertical dimension, which supports clean alignment when stacking these pulls in tall drawer banks. The antique pewter finish on the Andante cup pull maintains a single finish target, which simplifies hardware selection when matching other antique pewter components. The zinc die cast material provides a solid base for mounting tension, which helps pulls stay seated against the cabinet surface over time.

Common Questions About The Andante Cup Pull

Selecting This Andante Pull For Your Cabinets

The Berenson Andante Series 2-1/2 inch (64 mm) center to center antique pewter cup pull combines defined dimensions with zinc die cast construction, which supports consistent layout and daily cabinet use. The 4-1/16 inch length, 1 inch projection, and 1-1/4 inch width give clear sizing targets, which help align door and drawer hardware across a project. The antique pewter finish ties the pull to matching antique pewter decorative hardware, which keeps cabinet runs visually coordinated. For projects built around 2-1/2 inch center to center pulls, this Andante cup pull provides a clear, measured option.