
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware Craftsman knob is a 1-1/4 inch diameter cabinet knob from the Craftsman collection, built from zinc die cast with a Windover Antique finish, so it brings a consistent Craftsman-style look across doors and drawers. The 1-1/4 inch diameter gives fingers a defined gripping area, which helps when opening heavier cabinet fronts in busy shops or kitchens. A 1-1/8 inch projection sets the knob out from the door face, providing clearance for fingers while keeping the pull point close to the cabinet for controlled movement. The 1/2 inch base diameter concentrates the load at a compact footprint, which supports solid contact against the door or drawer front. Manufactured under Belwith Keeler with part number P2170-WOA, the knob stays clearly identifiable in project takeoffs and repeat orders. The Windover Antique finish ties into the Craftsman Series design intent, supporting cohesive runs of traditional cabinetry.
This Craftsman Series knob uses a 1-1/4 inch diameter head, which gives installers a straightforward reference when spacing multiple knobs across wide drawer faces. The 1-1/8 inch projection keeps the front of the knob set off from the cabinet surface, providing comfortable clearance for hands during everyday use. A 1/2 inch base diameter defines where the knob seats against the door or drawer, so it lands cleanly on a single drill point without covering large areas of the surface. The knob is specified with an 8-32 x 1 inch screw size, which matches the common cabinet knob thread and length standard for many face-frame and panel thickness conditions. That standard thread detail allows the knob to integrate cleanly into typical cabinet construction using familiar drilling and tapping routines.
The P2170-WOA knob from the Craftsman collection pairs the Windover Antique finish with a 1-1/4 inch diameter profile, making it suited to traditional cabinet runs where visual continuity is important along doors and drawers. Its zinc die cast construction gives the knob a solid, uniform body that works well on both base and wall cabinets in woodworking projects. The 1/2 inch base diameter creates a focused mounting footprint, so it sits neatly on framed or slab-style fronts without overwhelming narrow rails. With a 1-1/8 inch projection, the knob provides enough stand-off to clear common door profiles while still keeping the pull point close to the face for controlled door swing. These dimensions together support consistent placement along vertical stacks of drawers or horizontal rows of doors, helping installers maintain even sightlines throughout the job.
The 1-1/4 inch diameter and 1-1/8 inch projection work as fixed references that simplify layout, so tape measurements and drilling templates can be reused across multiple cabinet sections without refiguring grip space. A 1/2 inch base diameter defines the bearing circle against the front, so when the mounting hole is drilled on layout marks the knob naturally centers over that point for repeatable alignment. The specified 8-32 x 1 inch screw size matches a widely used cabinet hardware standard, which helps keep hardware selection consistent when coordinating with other knobs specified the same way. With the Windover Antique finish tied into the Craftsman Series, the visual result remains consistent from one cabinet bank to the next, supporting repeatable design results alongside the repeatable drilling and mounting process.
The P2170-WOA cabinet knob has a 1-1/4 inch diameter, giving a defined grip area that works well across standard cabinet doors and drawers.
This Craftsman Series knob has a 1-1/8 inch projection, setting the pull surface away from the door or drawer for comfortable finger clearance.
The Windover Antique knob is zinc die cast, providing a solid, uniform construction that supports a consistent feel on frequently used cabinets.
The cabinet knob is specified with an 8-32 x 1 inch screw size, aligning with a common thread and length used in cabinet hardware installs.
The P2170-WOA Craftsman knob uses a Windover Antique finish, supporting traditional cabinet designs and matching other Craftsman collection pieces.
This cabinet knob is manufactured under Belwith Keeler with part number P2170-WOA, helping tie it directly to the Hickory Hardware Craftsman Series.
The Hickory Hardware Craftsman knob in Windover Antique combines a 1-1/4 inch diameter, 1-1/8 inch projection, and 1/2 inch base diameter to support consistent cabinet layouts. With zinc die cast construction and the P2170-WOA designation, it aligns cleanly with Craftsman Series projects that call for matching cabinet hardware. For cabinet runs that need a traditional look anchored by standard 8-32 x 1 inch mounting details, this knob provides a clearly defined option for doors and drawers.
Sold In: 1 Each