Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Craftsman Series pull is a 3 inch center to center cabinet handle designed for everyday cabinet and drawer use. The zinc die cast construction provides a solid metal pull point for doors and drawers, helping hardware stay stable under regular opening and closing. The oil rubbed bronze highlighted finish creates a dark, traditional look with lighter edge accents, supporting projects that need Craftsman-style visual detail across multiple cabinets. With a total length of 4-3/8 inches, the pull spans more of the drawer or door front, which helps visually balance narrow 3 inch hole spacing on wider faces.
A projection of 1-3/8 inches sets the hand clearance away from the cabinet surface, which helps fingers grab the pull without rubbing against the door edge. The 7/8 inch width gives a broader gripping surface than a narrow wire pull, supporting a comfortable grip along the bar. The 3 inch center to center dimension defines the hole spacing, which matters when aligning new drilling or matching existing 3 inch layouts during replacements.
This Hickory Hardware Craftsman Series pull uses a 3 inch center to center mounting pattern, which means the screw holes in the cabinet or drawer front must be 3 inches apart on center. The pull uses 8-32 thread screws sized at 1 inch length, so the mounting interface is based on standard machine screw threads common in cabinet hardware. The 4-3/8 inch overall length gives visual coverage that extends beyond the screw locations, which helps the pull sit proportionally on many door and drawer widths planned around 3 inch spacing.
The 1-3/8 inch projection defines how far the handle stands off the surface, which affects both grip clearance and how far the hardware extends into adjacent spaces. A width of 7/8 inch sets the front-to-back bar profile, which influences how the pull feels in the hand when opening heavier cabinet faces in kitchen, bath, or shop environments.
The Craftsman Series 3 inch center to center pull is suited to cabinet and drawer fronts that use standard 3 inch boring, because the mounting holes align directly with that spacing. The 4-3/8 inch overall length matches well with face widths that need a slightly extended pull body, helping hardware appear proportional on medium drawer fronts. Its oil rubbed bronze highlighted finish works with designs that call for darker metal tones, supporting projects that coordinate hinges and other decorative hardware in similar finishes.
Because the pull is made from zinc die cast material, it delivers metal weight and rigidity appropriate for residential cabinetry, office built-ins, and similar casework that sees regular operation. The 1-3/8 inch projection works in layouts where doors need a functional gap between the pull and the face, supporting grip clearance even when adjacent cabinets sit close together. The 7/8 inch width keeps the pull visually defined without dominating narrow rails or stiles, which helps maintain balanced lines on framed and frameless cabinets.
The precise 3 inch center to center dimension on this pull supports repeatable drilling patterns, so installers can rely on a consistent boring setup across multiple doors and drawers. Using the specified 8-32 screw size supports standardization as well, since it uses widely recognized machine screw threads in cabinet shops. The defined 1 inch screw length works with typical door and drawer front thicknesses used in many cabinet builds, providing enough thread engagement through the pull without excessive protrusion.
The combination of 4-3/8 inch length, 1-3/8 inch projection, and 7/8 inch width creates a known footprint, which helps layout planning for hole placement relative to door edges and drawer rails. The oil rubbed bronze highlighted finish offers a predictable visual result, so multiple pulls installed across a run of cabinets maintain a consistent appearance. The zinc die cast construction supports uniform casting across units, which matters when repeating the same pull across kitchens, baths, or multi-room millwork jobs.
The Craftsman Series 3 inch center to center pull matches cabinet and drawer fronts drilled at 3 inches apart, supporting standard layouts on many kitchen, bath, and built-in projects.
The Hickory Hardware Craftsman Series pull has a 4-3/8 inch overall length, which visually spans beyond the mounting holes and suits many medium-width cabinet and drawer fronts.
The P2171-OBH cabinet pull projects 1-3/8 inches from the cabinet face, providing finger clearance for gripping while helping reduce contact with the door or drawer surface.
The Craftsman Series 3 inch pull is zinc die cast, giving a solid metal body that supports repeated use and consistent feel across multiple doors and drawers.
This Belwith Keeler cabinet pull has an oil rubbed bronze highlighted finish, creating a dark tone with lighter accents that complements Craftsman-style and traditional cabinet designs.
The 3 inch center to center pull uses 8-32 machine screw threads at 1 inch length, matching common cabinet hardware screw standards for mounting through doors and drawers.
The Hickory Hardware Craftsman Series 3 inch center to center pull delivers a zinc die cast body, oil rubbed bronze highlighted finish, and defined 3 inch mounting pattern that support consistent cabinet results. Its 4-3/8 inch length, 1-3/8 inch projection, and 7/8 inch width create a practical footprint for doors and drawers built around common boring dimensions.
When a project calls for Craftsman styling with standard 3 inch hole spacing, this P2171-OBH pull from Wurth Baer Supply provides a clear specification for layout, drilling, and visual coordination across the run.
Sold In: 1 Each
