Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Craftsman pull identifies this piece as part of the Craftsman Series, so it delivers a consistent style when you are outfitting multiple cabinet doors and drawers. The pull is identified as Belwith Keeler brand, which aligns with the Hickory Hardware line for coordinated decorative hardware selections on the job. The manufacturer part number P2173-OBH ties this specific design, finish, and size together, helping you match existing installations or specify it clearly on project documents. The pull is described for use in decorative hardware and moldings under handles and pulls, so it suits typical cabinet, furniture, and built-in applications where a graspable handle is required. Being labeled as a pull instead of a knob means it spans between two fastener points, which helps spread load across the door or drawer front in everyday use.
The 3-3/4 inch (96 mm) center to center specification defines the distance between mounting holes, guiding drilling or boring operations so the pull seats properly on the cabinet surface. The 5-5/16 inch overall length relates to how much linear space on a rail, stile, or drawer front the pull occupies, which helps with spacing multiple pulls across wide drawer banks. A projection of 1-1/2 inches sets how far the handle stands off the face, affecting both finger clearance and the swing path of nearby doors or drawers that might pass in front of it. With a width of 1-1/8 inches, the footprint on the face of the cabinet is clearly defined, helping with layout lines and visual alignment across a run of doors. Together, these dimensions give a clear picture of how the pull will sit and function on a finished installation.
The Craftsman Series designation places this pull in a style family well suited to cabinetry and millwork that reference Craftsman design themes, so it can be used to maintain a unified visual line across a room. The oil rubbed bronze highlighted finish supports applications where a dark bronze tone with highlighted edges is desired, such as kitchens or built-ins using bronze-toned hinges or lighting. Because the pull falls under the handles and pulls product class, it is positioned for use on cabinet doors, drawer fronts, and furniture pieces that call for a horizontal or vertical handle. The 3-3/4 inch (96 mm) center to center dimension matches a widely used drill pattern, which is practical when retrofitting existing fronts already bored to this spacing. The 5-5/16 inch length works well on small to medium drawer fronts where a pull that overhangs past the mounting points creates a balanced look relative to the drawer width.
The specified 96 mm center to center measurement allows installers to rely on known jigs and drilling templates set for that spacing, helping maintain alignment across a bank of doors and drawers. The 1-1/2 inch projection is defined, so repeated installations will provide consistent finger clearance, which matters when repeating this pull across an entire kitchen or office. With a listed width of 1-1/8 inches, each pull occupies the same front-to-back footprint on the face, giving predictable margins from edges or panel profiles when following layout marks. The zinc die cast material is specified, so cast parts can be expected to have uniform shape and sizing from piece to piece, which supports straight visual lines when pulls are installed in rows. The combination of overall length, width, and projection values lets you map out handle locations confidently on drawings and mockups, translating directly into smoother layout and drilling workflows on site or in the shop.
The P2173-OBH pull has a 3-3/4 inch (96 mm) center to center, 5-5/16 inch overall length, 1-1/2 inch projection, and 1-1/8 inch width, shaping both layout and hand clearance.
The 96 mm center to center spacing aligns with common drilling patterns, so existing jigs or bored fronts using this layout can use this pull without changing hole positions.
The Hickory Hardware Craftsman pull is made from zinc die cast, providing a consistent metal body that supports precise shapes and uniform sizing across multiple pulls.
The Belwith Keeler cabinet pull uses an oil rubbed bronze highlighted finish, giving a dark bronze tone with highlighted details that coordinates with similar bronze elements.
This pull is classified under decorative hardware handles and pulls, fitting cabinet doors, drawers, and similar applications where a two-point handle is required.
This pull is identified by manufacturer part number P2173-OBH and is described in the SAP record as PULL, 96MM C/C ORB HLT for precise specification.
The combination of a 3-3/4 inch (96 mm) center to center layout, 5-5/16 inch length, and 1-1/2 inch projection gives this Craftsman Series pull a clearly defined footprint for cabinet projects. The oil rubbed bronze highlighted finish and zinc die cast construction tie appearance and material into one specified part, the P2173-OBH. For projects requiring consistent handle sizing and a Craftsman-styled look across multiple doors and drawers, this Belwith Keeler pull offers a documented set of dimensions and finish details ready to plug into drawings and cut lists.
Sold In: 1 Each
