Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Craftsman cup pull is a 3-3/4 inch (96 mm) center to center chrome pull that forms a solid hand grip on cabinet fronts, which supports confident opening and closing on busy doors and drawers. The Craftsman collection design is described as strong and robust, so it visually reinforces cabinetry in rooms that rely on heavier, more purposeful styling. The chrome finish reflects light across the face of the pull, which helps the hardware stand out against painted, stained, or laminate surfaces. The pull length of 4-7/16 inches spans a good portion of typical drawer fronts, which gives the hand a predictable landing spot during everyday use. A projection of 1 inch sets the pull off the face of the cabinet, leaving room for the fingers to wrap behind the edge during a straight, comfortable pull. The 1-9/16 inch width provides a broad front surface, which supports an easy grasp along the full arc of the cup.
This Craftsman series pull is built around a 3-3/4 inch (96 mm) center to center drilling measurement, which gives installers a fixed reference when laying out boring jigs and drilling templates across cabinet runs. The 4-7/16 inch overall length means the ends of the pull extend slightly beyond the mounting holes, which frames the drilling pattern with a clear visual boundary on the front of the drawer or door. A 1 inch projection sets how far the pull face stands off the cabinet surface, which defines both finger clearance and how far the hardware steps into walk paths near tight galley runs. The 1-9/16 inch width controls the vertical space the cup occupies, which helps installers gauge spacing above rails or between stacked drawers.
The P2174-CH Craftsman collection pull, with its 3-3/4 inch (96 mm) center to center layout, aligns well with cabinet and furniture projects that follow metric-based or 3-3/4 inch boring standards, which simplifies coordinating hardware layouts across mixed casework. Its chrome finish suits interiors that already feature chrome decorative hardware or fixtures, which helps tie cabinet fronts into the wider room design. The strong, robust styling described for this Craftsman pull supports projects that lean toward a hearty interior design, which can complement thicker door rails, chunky face frames, or substantial drawer fronts. Because the length measures 4-7/16 inches, the pull looks proportionate on many kitchen, bath, or storage cabinets where mid-size hardware keeps the fronts from feeling either under-scaled or oversized.
The 1-9/16 inch width and 1 inch projection allow this cup pull to sit comfortably on face frames or slab fronts without dominating narrow rails, which gives installers flexibility when mixing it on doors and drawers in the same run. The zinc construction gives the pull a metal structure suitable for decorative cabinet use, which supports daily opening cycles on typical residential casework. The cup shape and full-width front arc help the hand engage from above or straight on, which can be useful on lower base cabinets where users often reach down at an angle. Together, the Craftsman collection styling, chrome finish, and mid-size dimensions position this pull as a practical choice wherever a bold but orderly cabinet hardware line is needed.
The P2174-CH pull has a 3-3/4 inch (96 mm) center to center dimension, which sets the distance between mounting holes for laying out cabinet drilling.
The Craftsman cup pull measures 4-7/16 inches in overall length, which defines how much space it spans across cabinet drawer or door fronts.
The cup pull has a 1 inch projection from the cabinet face, which determines finger clearance and how far the hardware stands off the surface.
The P2174-CH pull is 1-9/16 inches wide, which sets the vertical space it occupies on the cabinet front and affects spacing near rails.
This Craftsman series cabinet pull is made from zinc, which provides a solid metal body appropriate for decorative cabinet hardware use.
This Belwith Keeler Craftsman pull has a chrome finish, which gives it a bright metallic appearance that coordinates with other chrome hardware.
The Hickory Hardware Craftsman cup pull with 3-3/4 inch (96 mm) center to center drilling, 4-7/16 inch length, and chrome finish brings a defined size and look to cabinet fronts, which aids in planning consistent hardware layouts. The 1 inch projection and 1-9/16 inch width set predictable clearances, which help align this pull with surrounding faces, rails, and adjacent hardware. By matching the Craftsman collection styling and chrome finish to your project, this P2174-CH pull can serve as a straightforward, repeatable choice across doors and drawers where a strong, robust cabinet hardware line is desired.
Sold In: 1 Each
