Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Bungalow knob is a zinc die cast cabinet knob from the Bungalow collection that provides a defined, rectangular pull point for doors and drawers, which supports a consistent look across a run of cabinets. The 1-3/4 in (44 mm) length creates a wider gripping surface than small round knobs, which helps users get a solid hold when opening heavier or fuller cabinets. A 15/16 in (24 mm) width keeps the knob compact across the rail, which is useful when fitting hardware on narrower stiles. The 1 in projection sets the knob off the face of the cabinet enough for fingers to wrap behind, which supports comfortable operation in everyday use. The 1-1/16 in by 1/2 in base measurement spreads the contact area where the knob meets the door, which helps align the knob square to the edge during layout. The pearl nickel finish provides a uniform, light metallic appearance, which supports matching other pearl nickel decorative hardware in the same space.
This pearl nickel cabinet knob uses an 8-32 screw size, which aligns with standard machine-thread cabinet knob boring practices in many shops. A 1 in screw length is specified for this knob, which is sized for typical cabinet door and drawer front thicknesses commonly encountered in residential cabinetry. The zinc die cast construction provides a stable interior thread interface for the 8-32 fastener, which supports a firm connection between the knob and the wood or panel substrate. With a projection of 1 in, installers can plan hole locations knowing the pull point will stand off the surface by that distance, which is useful when coordinating with neighboring knobs or adjacent hardware on tight layouts.
The P2151-PN designation identifies this specific Bungalow series knob in pearl nickel, which helps specifiers call out the exact part for cabinet door and drawer layouts. As a knob categorized under Decorative Hardware & Moldings in the Knobs class, it is suited to roles where both appearance and daily operation matter. The 1-3/4 in length works well on standard cabinet doors, where it provides a clear gripping edge without overwhelming the stile. On drawers, the 15/16 in width keeps the hardware visually balanced while still giving enough purchase to pull loaded drawers. The 1-1/16 in by 1/2 in base measurement allows the knob to sit cleanly on framed fronts, as the footprint stays inside most rail heights while still covering the drilled bore.
The zinc die cast material of this Belwith Keeler Bungalow knob delivers uniform dimensions from piece to piece, which helps installers maintain straight visual lines when repeating the knob across an entire kitchen or bank of casework. The 1 in projection gives a fixed offset from the face frame, which simplifies layout when aligning this knob with neighboring pulls at matching stand-off distances. With the specified 8-32 screw size, shops can rely on a known drill diameter for through-boring operations, which streamlines jig setup when hardware boring is repeated over many fronts. The 1-3/4 in length combined with the 15/16 in width defines the visible face size, which lets designers check scale against panel widths and rail heights before committing to a pattern. The pearl nickel finish ties the look into other pearl nickel elements, which helps create a unified appearance across cabinets, furniture pieces, or built-ins using the same finish family.
The P2151-PN knob has a 1-3/4 in length, 15/16 in width, 1 in projection, and a 1-1/16 in by 1/2 in base, which guides layout and proportion on doors and drawers.
This pearl nickel cabinet knob is zinc die cast, which provides a solid, consistent body that supports repeatable drilling and a uniform feel across multiple installations.
The Hickory Hardware Bungalow knob uses an 8-32 screw size at 1 in length, which matches common cabinet knob boring practices for many door and drawer thicknesses.
This zinc die cast knob projects 1 in from the cabinet face, which offers finger clearance while allowing planning around nearby walls, trim, or adjacent hardware.
The Belwith Keeler Bungalow knob uses a pearl nickel finish, which establishes a light metallic tone that coordinates with other pearl nickel decorative hardware.
The P2151-PN cabinet knob is part of the Bungalow collection, which helps designers and installers coordinate it with matching Bungalow series hardware on the same project.
The pearl nickel 1-3/4 in P2151-PN cabinet knob combines defined dimensions, zinc die cast construction, and an 8-32 x 1 in screw size, which helps installers and shops plan consistent boring patterns and visual alignment across cabinet runs. With its Bungalow collection identity and Belwith Keeler branding, this knob fits projects that call for coordinated decorative hardware with known sizing and finish. For jobs needing a rectangular pearl nickel pull point that matches these measurements and mounting details, this Hickory Hardware Bungalow knob is suited to cabinet doors, drawers, and similar casework fronts.
Sold In: 1 Each
