
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware Euro-Contemporary knob gives cabinets a clean, modern pull point using a 1-1/2 inch square face, so fingers land comfortably on a broad surface. The 1-1/2 inch width keeps the visual footprint consistent across doors or drawers, helping layouts look aligned on straight cabinet runs. Its 1-1/2 inch length matches the width, creating a true square that simplifies layout measurements and grid spacing when repeating the part. The knob uses a satin nickel finish, which softens reflections compared to polished metal, helping the hardware sit quietly against both light and dark cabinet finishes. A zinc die cast body forms the core of the knob, giving it a solid feel in the hand while supporting everyday opening and closing cycles on frequently used doors. The piece is identified as P2163-SN under the Euro-Contemporary collection, which ties the design to a coordinated modern hardware family.
The knob uses a 1-1/2 inch length or diameter, so drilling centers can be calculated around a clear square footprint during layout. Its 1-1/8 inch projection establishes how far the hardware stands off the surface, which is important when planning clearances near adjacent doors, trim, or appliances. A 1-1/2 inch width matches the stated length, keeping the knob balanced on both axes for centered mounting on rails or drawer fronts. The 1-1/8 inch base measurement defines the contact patch against the cabinet face, which helps the knob seat predictably over a properly sized pilot hole. The product uses an 8-32 x 1 inch screw size interface, aligning with a standard cabinet knob thread that supports common drilling and fastening steps on typical door and drawer fronts.
This knob is part of the Euro-Contemporary collection, so its geometry and proportion suit modern or transitional cabinet runs where straight lines matter. The 1-1/2 inch square profile scales well on both doors and medium-size drawers, keeping the same hardware part across different cabinet types. Satin nickel finish helps the knob sit comfortably with brushed hinges or slides in similar tones, giving projects a coordinated metal look without high shine. The zinc die cast construction fits applications in kitchens, baths, or shop cabinets where hardware is handled multiple times a day, because the solid casting supports routine pulling forces. With a base of 1-1/8 inch, the knob visually anchors well on standard door stile widths, avoiding an oversized or undersized appearance on typical residential cabinet fronts.
The 1-1/2 inch square shape simplifies layout because installers can center the knob using equal offsets from both edges, reducing layout variations from door to door. Matching width and length means there is no orientation issue, so each knob presents the same face regardless of rotation during fastening. The 1-1/8 inch projection gives sufficient finger room behind the knob, which supports smoother operation on heavier drawers or loaded pantry doors. The 1-1/8 inch base measurement helps cover the immediate area around the mounting hole on painted or stained fronts, contributing to a clean finished look at the contact point. The specified 8-32 x 1 inch screw size interface aligns with common cabinet construction thicknesses, helping projects stay on a familiar fastening pattern. As a Belwith Keeler product under the Hickory Hardware Euro-Contemporary name, this knob carries a defined part number, P2163-SN, which aids repeat ordering when matching existing installations or expanding a job later.
The Hickory Hardware Euro-Contemporary knob has a 1-1/2 inch square face, a 1-1/2 inch width, a 1-1/8 inch projection, and a 1-1/8 inch base measurement, which defines its footprint and stand-off on the cabinet.
The 1-1/8 inch projection sets the distance from door surface to grip point, creating finger clearance that supports comfortable pulls on doors and drawers.
The knob is made from zinc die cast, providing a rigid metal body that supports everyday cabinet opening and closing in kitchens, baths, or workrooms.
The P2163-SN knob uses a satin nickel finish, which softens reflections so the hardware sits comfortably in contemporary cabinet designs without bright glare.
The Hickory Hardware Euro-Contemporary knob uses an 8-32 x 1 inch screw size interface, aligning with standard threaded connections commonly used in cabinet fronts.
The knob is part of the Euro-Contemporary collection from Belwith Keeler under the Hickory Hardware name, identified by manufacturer part number P2163-SN.
The Hickory Hardware Euro-Contemporary knob from Belwith Keeler combines a 1-1/2 inch square profile, 1-1/8 inch projection, and 1-1/8 inch base to deliver predictable sizing on cabinet fronts. Its satin nickel finish and zinc die cast construction support modern projects that call for consistent metal tones and a solid-feeling pull point. With the P2163-SN part number and standard 8-32 x 1 inch screw size interface, this knob fits cabinet jobs that value repeatable layout, dependable operation, and alignment with contemporary decorative hardware.
Sold In: 1 Each