Hickory Hardware Euro-Contemporary pull from the Euro-Contemporary collection is a zinc die cast cabinet handle in a satin nickel finish designed for cabinet and furniture applications where a streamlined, contemporary pull matches modern door and drawer layouts. The pull has a 3-3/4 inch, or 95 mm, center to center dimension, so the mounting hole spacing aligns with standard Euro-Contemporary drilling patterns used on many cabinet fronts. Overall length is 5-1/2 inches, giving the hand a solid gripping area along the face of the door or drawer while keeping visual lines narrow. The projection is 1-5/16 inches, which sets the gripping surface off the face enough for fingers to wrap behind. A width of 5/8 inch keeps the pull slim, so it works where a narrower rail or stile limits available mounting space.
This satin nickel pull uses a 3-3/4 inch, or 95 mm, center to center mounting layout, so two holes are set that distance apart through the door or drawer front to seat the hardware. The pull pairs with 8-32 x 1 inch screws, matching a common cabinet hardware thread and length for standard door and drawer front thicknesses. With its 5-1/2 inch overall length, the pull spans beyond the hole centers on both sides, so slight variances in edge distances still leave the handle centered over the layout. The 1-5/16 inch projection establishes a fixed stand-off from the mounting surface, which supports consistent clearance behind the handle line along a full bank of doors.
The P2161-SN satin nickel pull from the Euro-Contemporary collection suits cabinet and furniture faces drilled on a 3-3/4 inch, or 95 mm, center to center pattern, because the mounting bosses on the pull align directly with that spread. Its 5-1/2 inch overall length gives enough bar length to work on wider kitchen drawers or taller cabinet doors without looking undersized, while still fitting smaller bath or vanity fronts. The 5/8 inch width keeps the pull visually light, so it pairs well with flat-panel and Euro-style fronts that rely on clean, linear hardware. The satin nickel finish coordinates with satin nickel decorative hardware and moldings, supporting a consistent appearance across handles and pulls sourced within the same project.
The 3-3/4 inch, or 95 mm, center to center dimension provides a fixed drilling reference that simplifies jig setup when installing runs of pulls, because once the jig is set to that spacing, every door and drawer can be drilled to match. Zinc die cast construction gives the pull a uniform shape and straight lines, so when multiple units are mounted using that fixed spacing, the handles align neatly across cabinet faces. The 1-5/16 inch projection sets a repeatable offset from the door or drawer surface, which keeps hand clearance consistent along stacked drawers or adjacent doors. Matching the pull with 8-32 x 1 inch screws ties into a widely used cabinet hardware fastener size, which supports straightforward installation into standard thickness fronts without special fastener selection. Together, these defined dimensions and screw specifications support efficient hardware layout and help produce even sightlines across the finished installation.
The P2161-SN pull has a 3-3/4 inch, or 95 mm, center to center size, so drilling jigs can be set to that spacing for consistent cabinet hole layouts.
The Hickory Hardware Euro-Contemporary pull measures 5-1/2 inches in overall length, giving a generous gripping area across the cabinet face.
This satin nickel cabinet pull is made from zinc die cast material, which provides a consistently formed handle body for uniform alignment across multiple doors.
The P2161-SN satin nickel pull has a 1-5/16 inch projection, creating space between the pull and cabinet surface for fingers to wrap behind the handle.
This Belwith Keeler cabinet pull matches 8-32 x 1 inch screws, aligning with a standard cabinet hardware thread commonly used on doors and drawers.
This satin nickel handle has a width of 5/8 inch, giving a slim front profile that suits modern cabinet fronts with narrow rails or stiles.
The P2161-SN satin nickel pull from the Euro-Contemporary collection combines a 3-3/4 inch, or 95 mm, center to center layout with a 5-1/2 inch overall length, so it fits common cabinet drilling while offering comfortable hand contact. Zinc die cast construction, a 1-5/16 inch projection, and 5/8 inch width provide defined dimensions that support repeatable layouts across doors and drawers. For projects calling for a satin nickel finish and Euro-Contemporary styling from Hickory Hardware under the Belwith Keeler brand, this pull aligns cabinet hardware details with the project specifications.
Sold In: 1 Each
