Hickory Hardware Euro-Contemporary pull gives cabinets and drawers a smooth, modern zinc handle in an oil rubbed bronze highlighted finish, so you get a contemporary look with warm, darker tones. The 128 mm (5-1/16 inch) center to center drilling lines up with many standard cabinet layouts, helping streamline layout and boring on new work or when swapping hardware. A 9 inch overall length stretches visually across wider drawer fronts, which helps balance larger faces. The 1 inch projection creates hand clearance off the front of the cabinet, supporting a full grip without crowding the door surface. With a 7/8 inch width, the pull presents a substantial face to grab while still fitting comfortably on narrower rails. Using this specific P2165-OBH pull across a run keeps dimensions consistent from opening to opening, which supports a clean, unified appearance throughout the room.
This P2165-OBH pull uses a 5-1/16 inch (128 mm) center to center measurement, so drilling can follow that exact spacing across all fronts to keep runs straight. Because the pull length is 9 inches, it reaches beyond the hole centers at both ends, which allows some visual forgiveness around small layout variations near edges. The 1 inch projection defines how far off the face the grip stands, important when planning for door swings near walls or adjacent cabinetry. A 7/8 inch width means the footprint is contained within most standard stile and rail widths while still feeling substantial in hand. Using a consistent drilling pattern anchored to the 128 mm center measurement helps repeat the same alignment from cabinet to cabinet.
The Euro-Contemporary collection description notes that its smooth design works as an upgrade for existing or new cabinets or drawers, so this P2165-OBH pull suits both remodel and new construction layouts. Its 5-1/16 inch (128 mm) center to center size aligns with common metric-based drilling, which helps when hardware is planned along longer banks of cabinets. On taller doors, the 9 inch overall length gives a vertical or horizontal line that visually matches larger door faces, maintaining proportion with the scale of the panel. On drawers, the same length spreads the gripping area across wider fronts, helping distribute the visual weight of hardware on large drawer boxes. The oil rubbed bronze highlighted finish pairs with darker cabinet tones or contrasting lighter finishes, letting the pull stand out or blend depending on the surrounding casework.
The labeled 128 mm (5-1/16 inch) center to center drilling gives an exact mounting dimension, so jigs or drill guides can be set once and reused for every front, improving speed and alignment accuracy. Because the projection is stated as 1 inch, the clearance off the cabinet face is predictable, which helps avoid interference with adjacent doors or walls when handles pass by each other. The 7/8 inch width keeps the footprint narrow enough for standard stile applications, yet still broad enough that fingers do not slip off the edge during use. Using the same P2165-OBH pull across all doors and drawers ensures that every opening shares identical hand feel, dimension, and finish, simplifying layout decisions during planning. The zinc construction and Euro-Contemporary collection styling tie the functional dimensions to a defined design family, which helps coordinate hardware choices across a full room installation.
The P2165-OBH pull has a 5-1/16 inch (128 mm) center to center dimension, so holes are spaced on that measurement for consistent mounting.
The Hickory Hardware Euro-Contemporary pull is 9 inches long overall, giving extended coverage across doors or drawers for a more continuous visual line.
The P2165-OBH pull projects 1 inch from the cabinet face, setting predictable hand clearance and spacing from adjacent surfaces.
This Belwith Keeler pull is 7/8 inch wide, offering a solid gripping area while fitting comfortably on typical cabinet stiles and rails.
The drawer pull is made from zinc with an oil rubbed bronze highlighted finish, combining metal construction with a dark, highlighted appearance.
The P2165-OBH pull is part of the Euro-Contemporary collection, giving a smooth design that updates both new and existing cabinets or drawers.
The Hickory Hardware Euro-Contemporary pull P2165-OBH from Belwith Keeler pairs a 128 mm (5-1/16 inch) center to center drilling with a 9 inch length, 1 inch projection, and 7/8 inch width, so dimensions are clearly defined for layout. The zinc construction and oil rubbed bronze highlighted finish tie performance and appearance together in one part number. For cabinet or drawer runs where consistent sizing, clean lines, and a coordinated dark bronze look are priorities, this pull offers a straightforward way to keep hardware uniform from opening to opening.
Sold In: 1 Each
