Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Euro-Contemporary appliance pull gives cabinets and appliance fronts a long, smooth grip bar that supports steady door movement on heavier panels. The pull belongs to the Euro-Contemporary Collection, so its straight lines keep the look consistent across modern projects where a continuous, linear handle style matters.
The pull is specified as an appliance pull in the Decorative Hardware & Moldings, Handles and Pulls category, so it is suited to larger doors where extra hand space and leverage are helpful on every cycle. Material is zinc, so the pull provides a solid metal feel that supports repeated daily use in busy kitchen environments without adding excess weight to the door construction.
The satin nickel finish gives a muted metallic surface that visually ties in with many stainless-toned appliances while helping fingerprints appear less pronounced during normal handling. Brand identification as Belwith Keeler connects this piece to a long-running decorative hardware line, which matters when maintaining a consistent style or matching existing Hickory Hardware Euro-Contemporary components across a full room layout.
The 18 inch center to center measurement is the critical mounting dimension on this pull because it defines exactly where the two mounting points land on the panel. When cabinet or appliance fronts are bored or drilled on that spacing, this pull drops onto the layout with the feet aligned, so installers can fasten the pull without shifting hole locations.
The 23-7/8 inch overall length means the bar extends past the mounting points on both sides, giving a long visual line that can align with door edges, appliance trim, or nearby hardware. That added length also offers wider grab options, so users can work the door from high or low positions without changing hardware.
The 1-3/8 inch projection works together with the 1-1/8 inch width to create a comfortable hand pocket behind the bar, which matters when someone is pulling against heavy appliance gaskets or loaded cabinet doors. These fixed dimensions simplify design drawings and field layout because the handle clearance, reach, and visual footprint are all known values before any drilling starts.
This appliance pull sits in the Decorative Hardware & Moldings, Handles and Pulls category with a product class of Appliance Pulls, so it is tailored for areas where standard cabinet pulls feel undersized. The 18 inch center to center span makes it well suited to tall pantry doors, integrated appliance fronts, and wide drawers where a short pull would concentrate force in one small spot.
The satin nickel finish supports use on projects that coordinate with satin or brushed appliance faces, faucets, and hinges, so the pull can run across multiple fronts without visual breaks. Because the pull belongs to the Euro-Contemporary Collection, its smooth design and long lines pair with matching pieces from the same collection, which matters when carrying one design language from base cabinets up through tall units.
The Belwith Keeler brand connection and Hickory Hardware naming indicate the pull aligns with a recognized decorative hardware family, so specifiers can call out Manufacturer Part P2168-SN with confidence that the appearance, collection name, and finish description match what they are coordinating throughout the job.
The clearly defined 18 inch center to center spacing allows installers to template repeated door and drawer fronts, then reuse that template across a bank of cabinets or appliance panels. Using that fixed spacing, drilling becomes a repeatable step rather than a custom layout each time, which helps keep handle alignment tight across long runs.
The 23-7/8 inch overall length means that once the center to center is set, the amount of handle overhang past each fastener location is predictable. That predictability simplifies lining the pull up to stiles, rails, or appliance reveal lines because the installer can calculate exactly how far the handle will extend past the screws.
The 1-3/8 inch projection value gives a known stand-off from the surface, so designers can coordinate clearances with nearby doors or adjacent tall units. In practice, this helps avoid interference when doors swing past each other in corners or near walls.
The combination of 1-1/8 inch width and appliance-class length means the bar resists twisting when pulled from one end, which matters on wide or tall doors where users often grab the nearest edge. With that width, the pull reads as a deliberate appliance handle rather than a small cabinet pull, helping occupants intuitively reach for it on larger fronts.
The zinc material specification gives a consistent base metal, which supports uniform machining and finishing across multiple pulls on the same job. For installers and fabricators, this consistency means the satin nickel finish and edge feel will match from piece to piece, keeping the visual line continuous when several P2168-SN pulls are mounted in the same field of view.
The P2168-SN is an appliance pull from the Euro-Contemporary Collection, so it serves as a long handle for larger cabinet or appliance fronts where extra grip length is needed.
The Hickory Hardware Euro-Contemporary appliance pull has an 18 inch center to center measurement, which sets the exact spacing between mounting points for layout and drilling.
The Euro-Contemporary satin nickel pull has an overall length of 23-7/8 inches, giving a long bar that spans more of the door or drawer front for multiple hand positions.
The appliance pull uses zinc material with a satin nickel finish, providing a solid metal feel with a muted metallic appearance that coordinates with many kitchen fixtures.
The P2168-SN pull projects 1-3/8 inches from the door or drawer face, creating a comfortable finger clearance pocket for gripping heavy cabinet or appliance fronts.
This Belwith Keeler appliance pull has a width of 1-1/8 inches, giving a substantial front profile that feels stable and visually proportional on taller appliance-style doors.
The Hickory Hardware Euro-Contemporary appliance pull with 18 inch center to center spacing, 23-7/8 inch overall length, and satin nickel finish gives installers a defined, repeatable handle standard for larger cabinet and appliance fronts. Using the zinc-based P2168-SN in the Decorative Hardware & Moldings, Handles and Pulls category lets designers and builders align a full run of tall doors, wide drawers, and integrated appliances around one consistent Euro-Contemporary profile. For projects calling for a long, satin nickel bar with known drilling dimensions, this Belwith Keeler pull provides a clear, specification-driven choice.
Sold In: 1 Each
