KV6400 22" Full Extension Hold-in anti-rebound Ball Bearing Drawer Slides, Unhanded Side Mount Stainless Steel Poly-Pack - 6400P SS 22

22 Inch Full-Extension Ball Bearing Drawer Slide for Wet and Corrosion-Prone Environments

This is a 22 inch full-extension side-mount ball bearing drawer slide from Knape and Vogt's 6400 series, finished in stainless steel for installations where a standard zinc slide would be wrong for the environment. Rated 75 lb per pair with a hold-in anti-rebound detent, it brings the entire drawer out to the cabinet face and keeps it closed when shut.

Key Features

• Stainless steel finish — provides corrosion resistance for damp, washdown, or food-adjacent environments where zinc-plated slides fall short.
• Full extension — the entire drawer clears the cabinet opening, making rear contents fully reachable.
• 75 lb load rating per pair — sized for standard kitchen, bath, and utility drawers within its weight class.
• Hold-in anti-rebound detent — keeps the drawer closed after a firm push instead of bouncing back open.
• Non-handed design — both slides in the pair are identical, so there is no left or right to sort on the bench.
• 1/2 inch side clearance — standard side-mount fit; build the drawer box 1 inch narrower than the cabinet opening.

Where the Stainless Finish Makes the Difference

The 6400 series in stainless steel is the right call when the cabinet will see moisture, cleaning agents, or humidity that would compromise a zinc-plated slide over time. Think utility rooms with frequent mopping, outdoor kitchens under a covered porch, commercial-adjacent prep areas, or bath vanities in high-humidity climates. The hold-in anti-rebound detent is especially useful in these settings — a drawer that bounces back open in a busy workspace is a safety issue as much as a nuisance. Standard-motion design means no soft-close or spring assist; the drawer rides the ball bearings and stays wherever it is left, which also means no mechanism to corrode or gum up from cleaning products.

Construction and Finish

The slide is cold-formed steel with a stainless steel finish, built on the same telescoping ball-bearing architecture as the rest of the 6400 series. Ball bearings run in full-length raceways for smooth, consistent travel under load. The poly-pack ships one pair per package. Lever disconnect allows the drawer to be pulled free for cleaning — a practical detail in any environment where the drawer slides see regular exposure to spills or spray.

Who Specifies This Slide

Cabinet shops finishing a run of vanity boxes for a humid coastal climate, contractors outfitting an outdoor kitchen, and commercial woodworkers building prep-area cabinetry will find the stainless finish justifies the step up from zinc. At 75 lb per pair and 22 inches, the slide suits standard-depth drawers in the kitchen, bath, and utility ranges — not a heavy-duty file application, but the right choice when the environment demands more than a zinc finish can give. Because it is non-handed and shares the standard 1/2 inch side clearance, it drops into the same drawer box layout as any 6400-series zinc slide of the same length.

The Right Slide for Environments Where Zinc Is Not Enough

When the job calls for full extension, a stay-closed detent, and a finish that holds up past what zinc offers, the Knape and Vogt 6400 series in stainless steel covers it — without changing the standard drawer box layout your shop already runs.