Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Zephyr knob gives cabinets a compact 1-1/4 inch diameter pull point that fits comfortably in the hand, helping doors and drawers open smoothly in tight residential or shop layouts. The Belwith Keeler brand and Zephyr collection tie this knob into a defined decorative hardware family, which supports consistent styling across multiple cabinet runs. The zinc die cast material provides a solid-feeling knob body that handles everyday use on frequently opened fronts. Its oil rubbed bronze highlighted finish brings a darker tone with lighter edge accents, which helps the knob stand out visually on many wood or painted surfaces. A 1 inch base diameter keeps the knob footprint controlled on the face frame or door while covering the drilled hole cleanly. The 1-1/4 inch projection sets the gripping surface away from the door face, giving fingers room to pull without scraping knuckles during repeated operation.
The 1-1/4 inch length or diameter gives this knob a balanced size that works on many door and drawer widths, which streamlines layout across mixed cabinet banks. A 1-1/4 inch projection defines how far the gripping point stands off the surface, which reduces contact between fingers and finished faces during frequent use. The 1 inch base diameter focuses load transfer into a defined area, which supports stable mounting when the knob is tightened against the panel. The 8-32 x 1 inch screw size specification identifies the threaded interface, which aligns with common cabinet boring depths in many stock fronts. Using a 32 mm (1-1/4 inch) diameter in the Zephyr series keeps this knob visually compact, which suits smaller doors or drawer fronts where oversized pulls could dominate the layout.
The Zephyr series oil rubbed bronze highlighted 1-1/4 inch diameter knob works on cabinet doors and drawers that call for a compact, round pull, which helps maintain a clean line on both face frame and frameless fronts. Its decorative hardware and moldings classification places it in finished cabinet work rather than rough construction, which suits kitchens, baths, built-ins, and shop storage needing a finished appearance. The oil rubbed bronze highlighted finish brings contrast against lighter materials and blends into darker stains, which allows installers to repeat the same knob across varying room conditions. With a 1 inch base diameter, this knob sits comfortably on standard stiles and rails, which is important when spacing knobs near panel profiles or edge details. Being part of the Zephyr collection means this knob pairs visually with other Zephyr pieces, which supports coordinated hardware layouts on larger projects.
The 1-1/4 inch diameter and 1-1/4 inch projection work together to create a consistent hand feel, which gives installers predictable results when spacing knobs in grids or aligning them on drawer banks. Zinc die cast construction forms a uniform knob body, which helps maintain identical profiles from piece to piece on long cabinet runs. The 1 inch base diameter sets a fixed bearing surface against the door or drawer, which reduces rocking when the knob is tightened to final torque. The specified 8-32 x 1 inch screw size defines the thread and length relationship, which supports straightforward matching to pre-bored cabinet fronts using that standard thread. The P2283-OBH manufacturer part number directly identifies this exact Zephyr knob, which limits mix-ups when matching existing installations or expanding an earlier Belwith Keeler Zephyr project. The defined oil rubbed bronze highlighted finish code keeps finish selection repeatable, which is important when multiple trades are pulling from the same specification.
The Hickory Hardware Zephyr knob has a 1-1/4 inch diameter, which provides a compact pull point suited to standard cabinet doors and drawers.
The knob projection is 1-1/4 inch, which spaces the grip off the surface so fingers can pull without rubbing against the cabinet face.
The Zephyr knob is zinc die cast, which creates a solid, molded body suitable for everyday cabinet use.
The P2283-OBH knob uses an oil rubbed bronze highlighted finish, which combines a dark tone with lighter highlights on the knob profile.
The base diameter is 1 inch, which covers the bore hole while fitting comfortably on typical cabinet stiles and rails.
The Zephyr series knob uses an 8-32 x 1 inch screw size, which matches a common cabinet hardware thread and length standard.
The oil rubbed bronze highlighted Zephyr series 1-1/4 inch diameter knob ties a defined size, projection, and 1 inch base into one part number, giving projects a repeatable hand feel across doors and drawers. Zinc die cast construction and the Belwith Keeler Zephyr collection identity align this knob with decorative cabinet work where consistent hardware matters. The specified 8-32 x 1 inch screw interface, combined with the compact 32 mm diameter, supports straightforward layout on a wide range of cabinet fronts. For work calling for a small, round oil rubbed bronze highlighted pull within the Zephyr series, this P2283-OBH knob provides a focused option.
Sold In: 1 Each
