Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Zephyr pull describes a zinc die cast cabinet handle from the Zephyr Series that uses a 5-1/16 inch (128 mm) center to center mounting, so it lines up with standard drill patterns on many cabinet doors and drawers. The 5-7/8 inch overall length gives this pull a balanced look across typical face widths, which helps maintain consistent visual lines on multi-door runs. A satin nickel finish provides a muted metallic appearance that coordinates with many existing hinges and appliances in kitchens, baths, and built-ins. The 1-1/8 inch projection sets the hand clearance off the front, giving fingers room to grab while limiting how far the pull extends into walkways. A 13/16 inch width gives enough surface area for a solid grip while still fitting cleanly on narrower rails or drawer fronts. Brand identification as Belwith Keeler positions this pull within a recognized decorative hardware family for coordinated projects.
The 128 mm center to center drilling dimension gives installers a clear layout for boring or routing, which simplifies marking jig setups when running multiple fronts. A stated 5-7/8 inch overall length defines edge clearances near stile or rail transitions, which helps plan exact placement to avoid crowding panel details. The 13/16 inch width identifies the footprint that rests on the door or drawer face, which matters when working on narrow rails or slender drawer fronts. With a 1-1/8 inch projection, this cabinet pull establishes a stable reach distance that balances grip comfort and front profile, which is useful when coordinating with other hardware depths along a full elevation.
The Zephyr Series identity positions this pull within a decorative hardware line that suits cabinet doors and drawers in kitchens, baths, and storage pieces where a streamlined handle is needed. Its 5-1/16 inch (128 mm) center to center drilling matches a widely used handle spacing, which lets installers repeat one boring setup across a bank of cabinets. The 5-7/8 inch overall length suits medium to larger drawer fronts, so the pull does not look undersized on common base cabinet drawers. A 13/16 inch width keeps the footprint compact, which helps when mounting on narrower stiles or small upper cabinet doors. The satin nickel finish lets this pull sit comfortably alongside other satin nickel hardware in the same room, which supports a consistent visual package across multiple cabinet lines or zones.
The defined 128 mm center to center spacing gives fabricators a fixed distance for boring jigs, which reduces layout variation when drilling dozens of fronts. With a known 1-1/8 inch projection, installers can predict how far the pull extends into door swing paths, which aids in planning clearances near adjacent cabinets or walls. The 5-7/8 inch overall length allows consistent alignment relative to drawer edges, which helps maintain even reveals and balance along stacks of drawers. A 13/16 inch width offers enough bearing surface on the face for stable fastening, which supports clean, solid-feeling operation over repeated use. Identification as Belwith Keeler hardware ties this pull into a branded decorative hardware group, which helps designers and shops specify matching or complementary pulls and handles across an entire project.
The Hickory Hardware Zephyr pull has a 5-1/16 inch, or 128 mm, center to center dimension, which defines the hole spacing used for drilling cabinet doors and drawers.
The P2282-SN pull has a 1-1/8 inch projection, which sets the distance between the cabinet face and the gripping surface for hand clearance and profile planning.
This 128 mm center to center pull has a 5-7/8 inch overall length, which defines how much of the door or drawer front the handle spans visually.
The Zephyr Series satin nickel pull is zinc die cast, giving it a metal construction that suits typical decorative cabinet hardware applications.
The Belwith Keeler cabinet pull is 13/16 inch wide, which defines the footprint that rests against the cabinet face during installation.
The P2282-SN pull specifies 8-32 x 1 inch screws, which establishes the machine screw thread and length used with this handle.
This satin nickel cabinet pull from the Zephyr Series provides a 5-1/16 inch (128 mm) center to center drilling, so it aligns with a common cabinet layout standard. With known dimensions for length, width, and projection, this Belwith Keeler handle lets shops and installers plan hole locations, clearances, and visual proportions before drilling. For projects calling for a zinc die cast satin nickel pull with 128 mm center spacing, the P2282-SN part number gives a defined option to specify and repeat across multiple cabinets.
Sold In: 1 Each
