Hickory Hardware Zephyr Series pull gives you a 3 inch center to center handle designed for standard cabinet and drawer hole spacing, so it works well when you are laying out new fronts or refreshing existing faces with this sized pull. The Zephyr Series identity defines the style family, which helps you keep a consistent look across multiple doors and drawers when you stay within this collection. The oil rubbed bronze highlighted finish provides a dark bronze tone with lighter rubbed highlights, which adds visual depth on cabinet faces and helps tie together other bronze elements in the room. The pull is made from zinc die cast material, which creates a solid metal body suitable for everyday cabinet use in kitchens, baths, or shop storage. Brand marking from Belwith Keeler connects this pull to a long-running decorative hardware maker, giving you a clearly defined product line when specifying hardware for a project.
The 3 inch center to center measurement on this Hickory Hardware Zephyr Series pull sets the exact distance between mounting points, so you can align every handle across a run of cabinets using the same drilling pattern. With an overall length of 3-13/16 inch, this pull sits slightly beyond the hole spacing at each end, which helps visually center the grip on doors and drawers while keeping to a compact footprint. The 1-1/8 inch projection controls how far the pull extends from the cabinet surface, providing a defined gap for fingertips and helping doors open without scraping adjacent faces. A width of 13/16 inch gives the pull a moderate front profile, which offers a comfortable contact area while still fitting on narrower rails or smaller drawer fronts. Together, these measured dimensions support repeatable layouts when you are planning multiple cabinets in a project.
This Belwith Keeler Hickory Hardware Zephyr Series pull, with its 3 inch center to center spacing, fits cabinet and drawer fronts drilled on that standard layout, so it suits many residential and shop cabinet runs using this mounting pattern. The oil rubbed bronze highlighted finish lets this pull sit comfortably on stained wood, painted cabinet doors, or laminate fronts, because the dark tone and lighter highlights work against both light and dark surfaces. Its 3-13/16 inch overall length makes it a good match for small to medium doors and drawers, keeping hardware proportionate without overwhelming narrow rails. A width of 13/16 inch allows the pull to sit on face frames or full-overlay styles, helping it look balanced even when rail height is limited. The 1-1/8 inch projection provides hand clearance that works on base cabinets, upper cabinets, or storage units in a woodworking shop where repeated opening is common.
The zinc die cast construction of this Zephyr Series pull gives you a uniform metal body, which supports consistent sizing across multiple units so hole locations and visual lines track cleanly along long cabinet runs. The defined 3 inch center to center measurement simplifies jig setup when you are drilling doors in batches, saving layout time across a full kitchen or bank of shop cabinets. Its 3-13/16 inch overall length gives a predictable end-to-end dimension, which helps when you are aligning pulls at consistent distances from door edges or drawer sides for a tidy finished look. The 1-1/8 inch projection helps maintain a uniform stand-off across every door, which feels consistent in the hand as you move from one cabinet to another. With its 13/16 inch width, the pull offers enough face coverage to visually anchor each door while still giving you flexibility to position it on narrower framing without crowding.
The Hickory Hardware Zephyr Series pull has a 3 inch center to center dimension, which sets the hole spacing for mounting on cabinet doors and drawers.
The P2280-OBH Hickory Hardware pull has an overall length of 3-13/16 inch, giving you a compact handle that suits small to medium cabinet fronts.
The Zephyr Series cabinet pull is made from zinc die cast, providing a solid metal construction suited to regular cabinet and drawer operation.
This Belwith Keeler cabinet pull has an oil rubbed bronze highlighted finish, giving a dark bronze look with lighter rubbed highlights on cabinet faces.
This cabinet pull projects 1-1/8 inch from the door surface, creating finger clearance while keeping the hardware relatively low profile on the cabinet.
The Zephyr Series pull has a width of 13/16 inch, giving a moderate face profile that balances visual presence with fit on narrower cabinet rails.
The Hickory Hardware Zephyr Series pull P2280-OBH from Belwith Keeler brings together a 3 inch center to center layout, 3-13/16 inch overall length, and 1-1/8 inch projection to support consistent cabinet runs. The zinc die cast construction and oil rubbed bronze highlighted finish define both feel and appearance, helping you coordinate with other bronze hardware in the same project. When your layout calls for a 3 inch spacing pull in this size and finish, this Zephyr Series option from Wurth Baer Supply offers a clearly specified choice for cabinets and drawers.
Sold In: 1 Each
