Nexis Cam Adjustable Face Frame Mounting Plate, Nickel-Plated, with Pre-Mounted Wood Screws, 0mm

Nexis Cam Face Frame Mounting Plate Purpose

Nexis cam adjustable face frame mounting plate describes a Grass America hinge mounting plate designed for face frame cabinets, so it gives installers a defined interface between the cabinet frame and the Nexis hinge. The 0mm plate height keeps the hinge position flat to the frame, which helps maintain consistent overlay when the layout is built around a flush mounting surface. The plate is made of die-cast steel, which provides a solid base under the hinge arm and supports repeatable door positioning under normal cabinet use. Its nickel-plated finish covers the steel body, giving a hard, metal surface that resists handling wear as doors are adjusted during installation. As a Nexis face frame adapter plate, it is built to work within the Nexis hinge system, supporting a known geometry that simplifies planning hinge locations across multiple doors on the same run.

Hinge Mounting Plate Details That Save Time

• The Nexis face frame adapter plate uses a clip on design to affix to the hinge, so the hinge arm can be attached or removed from the plate without repositioning the plate on the cabinet, which can speed up hinge installation and later adjustment work.
• The plate has two cams that provide plus or minus 2 mm of cam height adjustment, giving a small but precise vertical shift at the hinge that helps align door reveals across a row of cabinets without redrilling pilot points.
• The cams also provide plus 3 minus 1 mm of cam depth adjustment, which lets the hinge change how tightly the door sits to the face frame and helps fine tune the door-to-frame gap after the hinge positions are set.
• The adapter plate attaches to the cabinet side via pre-mounted wood screws, so the plate arrives ready to be driven into prepared locations, reducing handling steps and helping keep plate locations consistent between cabinets.
• The die-cast steel construction forms a rigid mounting base for the hinge arm, which supports stable hinge positioning when doors are opened and closed repeatedly in normal cabinet service.

Face Frame Hinge Plate Mounting And Adjustment

This Nexis cam adjustable face frame mounting plate is part of a hinge mounting system for face frame cabinets, so it sits between the Nexis hinge arm and the cabinet frame to define the door pivot location. The 0mm mounting height fixes the hinge interface close to the frame surface, which is useful when cabinet layouts, overlays, or boring patterns are calculated around a zero-height plate. The two integrated cams provide plus or minus 2 mm of cam height adjustment and plus 3 minus 1 mm of cam depth adjustment, so door position can be tuned vertically and in depth at the plate instead of relocating hinge screws. Attachment to the cabinet side via pre-mounted wood screws puts the plate in a stable position, supporting repeatable hinge alignment from cabinet to cabinet.

Using This Nexis Plate In Cabinet Runs

Where The Nexis Face Frame Adapter Plate Fits

The Nexis face frame adapter plate is defined as a hinge mounting plate for face frame cabinets, so it is suited to installations where a face frame structure carries the cabinet doors. As a Nexis face frame adapter plate from Grass America, it is intended to work within the Nexis hinge family, giving a consistent interface height of 0mm at every hinge location in a run. When the plate attaches to the cabinet side via pre-mounted wood screws, it establishes a fixed anchoring point on the cabinet, so each hinge position can follow a common layout pattern. The die-cast steel body provides a rigid connection between the frame and the hinge arm, which supports stable door operation in typical cabinet environments where doors are opened and closed many times.

Why The 3D Cam Adjustments Matter In Use

The plate incorporates two cams that deliver plus or minus 2 mm of cam height adjustment, so the hinge position can be shifted slightly up or down after installation to correct for minor drilling variances or irregularities in face frame construction. The same cam system provides plus 3 minus 1 mm of cam depth adjustment, which lets the door move slightly toward or away from the frame without changing the plate mounting points, helping refine door-to-frame gaps for an even reveal. The clip on connection that affixes the adapter plate to the hinge enables the hinge arm to be engaged or released from the plate while the plate itself stays fixed, which supports quick door removal or hinge changes without disturbing the calibrated cam settings. Together, the 3D cam adjustments and clip on interface provide a way to fine tune door alignment directly at the plate, reducing rework when setting multiple doors to the same visual standard.

Common Questions About This Nexis Mounting Plate

Selecting This Plate For Nexis Face Frame Work

This Nexis cam adjustable face frame mounting plate from Grass America combines a 0mm height, die-cast steel body, and 3D cam adjustment in a clip on format, so it suits hinge layouts that rely on precise, repeatable door alignment. The plus or minus 2 mm height adjustment and plus 3 minus 1 mm depth adjustment give installers tuning range at the plate, while attachment to the cabinet side with pre-mounted wood screws helps maintain consistent hinge positions along a cabinet run. For projects built around Nexis hinges on face frame cabinets, this hinge mounting plate provides a defined geometry and adjustment range that supports efficient installation and clean results.