Würth #8 x 7/16" Truss Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Black, 3670000247961 5000 - 5000/Box

Black Hinge and Drawer Slide Installation Screw For Thin-Panel Hardware Mounting

This Würth #8 x 7/16-inch truss head screw is built for mounting hinges, drawer slides, and cabinet hardware to panel surfaces where a short screw is the right call. The compact 7/16-inch length keeps the fastener well within thinner cabinet panels and hardware mounting plates without risk of blowout on the back face.

Key Features

• 7/16-inch length sized for hardware mounting in thinner panels where longer screws would penetrate too deeply.
• Truss head profile provides a wide, low-profile bearing surface that distributes clamping load across the hardware mounting plate.
• #2 Phillips drive engages standard Phillips bits already on the tool belt or in the drill driver.
• Coarse thread with sharp point for fast starts and reliable thread engagement in wood-based cabinet panels.
• Black finish blends with dark cabinet interiors and dark-finished hardware mounting plates.
• 5000 screws per box keeps production shops and busy installation crews supplied through long runs.

Where the 7/16-Inch Length Makes a Difference

Cabinet hardware mounting plates, hinge cups, and drawer slide brackets are designed with specific pilot holes that call for a short, controlled screw. The 7/16-inch length on this screw is matched to those applications: it seats the truss head firmly against the mounting plate without the tip travelling far past the hardware and into the panel. That matters most on thin side panels, melamine interiors, and cabinet doors where a longer screw would risk breaking through the back face or a visible surface. For high-volume hinge and slide installation, having the right short screw on hand avoids substitutions that cause problems at the panel face.

Truss Head, Black Finish, and Coarse Thread Construction

The truss head profile is wider and lower than a pan head, spreading the load across more surface area of the hardware mounting plate without adding noticeable height above it. That broad bearing surface helps the screw hold the plate flat and secure rather than concentrating force at a narrow point. The black finish coordinates with the dark mounting plates common on European-style hinges and undermount or side-mount drawer slides. Coarse thread provides fast engagement in particleboard, MDF, plywood, and solid-wood cabinet panels, which cover the vast majority of cabinet construction materials in the shop and in the field.

Right for Cabinet Shops and Installation Crews Running Volume

A box of 5000 is sized for the pace of a production cabinet shop or an installation crew working through a full project. Hinge and drawer slide installation consumes fasteners quickly when every cabinet gets two or more pairs of hinges and a full complement of drawer slides. Having this specific screw, in the right length and head style, stocked in quantity means the crew reaches for the correct fastener every time rather than improvising with whatever is on the bench. The #2 Phillips drive works with the cordless drivers and screwguns already in use, so there is no need for a dedicated bit change on the installation line.

Common Questions

The Fastener That Keeps Hardware Seated and Installation Moving

When the length is right and the head matches the plate, hardware goes on flat, stays put, and the job keeps pace. This Würth #8 x 7/16-inch truss head screw is stocked in quantity so the right fastener is always at hand for hinge and drawer slide work.