Würth #8 x 1-1/4" Modified Washer Head Drawer Front Adjusting Screw Phillips Drive - Type 17 Auger Point Coarse Thread Zinc, 0684624005961 6500 - 6500/Box

#8 Drawer Front Adjusting Screw For Precise Fit

#8 x 1-1/4 drawer front adjusting screw describes a screw sized for typical drawer front mounting, so installers can match length and gauge to common cabinet construction without reworking holes. The modified washer head creates a broad bearing surface, spreading load across the drawer front and bracket to help reduce crushing in softer materials. Its 1/2 inch diameter washer head also improves clamping contact, which supports solid alignment when you pull a face into final position. The drawer front adjusting purpose means this screw is suited to dialing in reveals and maintaining consistent gaps across a run of fronts. As a Wurth screw in the Fasteners|Screws category, it fits into standard woodworking and cabinet installation workflows that already rely on similar screw formats.

Key Drawer Adjusting Screw Details That Matter

• The modified washer head design provides a wide bearing surface, helping spread force over the drawer front area so adjustments can be tightened down with less risk of imprinting the material.
• The 1/2 inch diameter washer head offers extra contact on brackets or hardware, supporting stable clamping when pulling a drawer front into final alignment during installation or later adjustment.
• The Type 17 auger point helps the screw start into wood more easily, which can reduce wandering at the mark and support cleaner, straighter driving into cabinet parts.
• The coarse thread pattern is suited to typical wood and panel materials, allowing the screw to bite quickly and hold tension as the drawer front is pulled tight.
• The case hardened construction provides a hardened outer surface, helping the screw withstand driving torque from a #2 Phillips bit during repeated drawer front adjustments.
• The zinc finish offers a basic level of surface protection, which supports screw integrity in normal indoor cabinet environments where these drawer fronts are installed.

Installation Details For Drawer Front Adjusting Use

The Phillips drive head is designed for a #2 Phillips bit, aligning with common driver tips kept in cabinet and woodworking tool sets. This standardized drive style allows consistent engagement when driving multiple drawer front screws across a project. The Type 17 auger point is engineered to aid starting into wood, which can support driving into drawer fronts and supporting rails without extensive pre-drilling in many typical materials. Its coarse thread works with the auger point to pull the screw into the substrate efficiently, creating the clamping force needed to draw a front into position. With its 1-1/4 inch length, the screw is sized for drawer front adjusting applications where it must pass through the front and engage underlying support components.

How This Wurth Drawer Adjusting Screw Works On The Job

Where This Drawer Front Adjusting Screw Fits Best

This Wurth drawer front adjusting screw is positioned for use in drawer front attachment and adjustment tasks in woodworking projects. The modified washer head design pairs with drawer front hardware that benefits from a broad bearing surface, supporting stable clamping against mounting brackets or rails. Its 1/2 inch diameter head provides extra coverage on slotted or oversized holes, which helps when tweaking vertical or horizontal positioning of the front. The #8 gauge and 1-1/4 inch length allow the screw to bridge through a typical drawer front thickness and into the supporting structure, creating a solid connection. As a Wurth fastener within the screws class, it aligns with the needs of cabinet shops and installers that rely on consistent, repeatable fastening solutions.

Why These Screw Details Support Repeatable Alignment

The Type 17 auger point on this screw is designed to help it enter wood cleanly, which supports accurate starts when positioning a drawer front relative to neighboring fronts. By helping the screw track straight from the start, the auger point can reduce side drift that might otherwise shift the front. The coarse thread pattern increases pull as the screw advances, creating the clamping force needed to snug a misaligned front into its final reveal. Case hardened construction adds a hardened surface that supports repeated driving or backing out with a #2 Phillips bit during fine-tuning. The zinc finish contributes a basic protective layer in indoor cabinet environments, which helps maintain thread condition so the screw can continue to adjust or hold over the life of the installation.

Common Questions About This Drawer Adjusting Screw

Select This Screw For Focused Drawer Front Work

This Wurth zinc drawer front screw combines a #8 x 1-1/4 length, 1/2 inch diameter modified washer head, and coarse thread to support accurate drawer front alignment. The Type 17 auger point and #2 Phillips drive work together to streamline driving across a run of fronts. Case hardened construction and a zinc finish are tailored to normal cabinet conditions, supporting consistent performance from installation through later adjustments.