Würth #6 x 1/2" Flat Head Hinge and Drawer Slide Installation Screw Combo Drive - Sharp Point Coarse Thread Zinc, 3670000287961 1000 - 1000/Box

Hinge and Drawer Slide Installation Screw For Thin Panel Hardware Mounting

This Würth #6 x 1/2" flat head screw is purpose-built for mounting European cup hinges, drawer slides, and cabinet hardware to cabinet panels. At 1/2" in length, it seats hardware firmly in 3/4" panel material without over-penetrating, making it the right choice for hinge plates and slide brackets that sit close to the panel face.

Key Features

• 1/2" length keeps the screw in the panel face without breaking through the back of standard 3/4" cabinet stock.
• #6 gauge flat head with a countersunk profile seats flush inside hinge mounting plates and drawer slide brackets.
• Combination Phillips and square drive recess accepts a #2 Phillips or a #2 square bit in the same head.
• Coarse thread for wood and panel materials grips particleboard, MDF, and solid wood construction used in cabinet boxes.
• Sharp point starts without pre-drilling in the pre-bored holes common to European hinge plates and slide mounting hardware.
• Zinc finish for interior cabinetry provides standard corrosion resistance suited to dry indoor cabinet environments.

Where This Screw Fits the Job

European cup hinges and drawer slides mount through pre-drilled holes in their plates and brackets. Those holes are sized for a #6 screw, and the shallow depth of a 1/2" fastener keeps the screw well within the panel without reaching the decorative surface on the opposite side. This screw is the standard go-to for production cabinet shops installing hinges, undermount slide clips, side-mount slide brackets, and related hardware on 3/4" box panels. It also works for re-mounting loose hardware where the original screw has stripped and a replacement of the same length is needed to avoid breakthrough.

Material, Finish, and Drive

The zinc finish delivers reliable indoor corrosion protection for cabinet interiors, which is exactly where this screw lives. The flat head seats cleanly into the countersunk holes of standard hinge plates without standing proud. The combination drive recess accepts both a #2 Phillips and a #2 square bit, which gives installers flexibility when working from a kit with mixed bits or when switching between drivers on the bench and in the field. The square recess is designed to hold the screw on a correctly sized bit for one-handed placement, which matters when the other hand is holding a hinge plate in position against a cabinet side.

Who Reaches for This Box

Cabinet shops running production lines keep a box of 1000 on the bench beside the hinge press. The 1/2" length is the most common specification for hinge and slide installation on standard 3/4" melamine, MDF, and plywood box panels. Installers working from pre-built cabinets on site use them to remount hardware that shifted in transit or to replace stripped screws during final adjustment. The 1000-piece count supports both steady shop use and having enough on hand that the work never stops for a hardware run.

Common Questions

Keep the Install Moving

When the hinge plates are lined up and the slides are in position, a screw that fits the hardware, holds in the panel, and works with the bit already in the driver is the only thing standing between you and a finished cabinet. This 1/2" #6 combo drive screw is sized for exactly that moment, and a box of 1000 means it will not be the reason the job slows down.