Hickory Hardware Studio Series 3" (76 mm) Center to Center Satin Nickel Pull, - P3010-SN

Hickory Hardware Studio Series Pull For Cabinets

Hickory Hardware Studio Series pull gives you a 3 inch center to center grip that lines up with standard cabinet drilling, which helps speed up layout on both new installations and straightforward replacements. Made from zinc die cast material, this pull provides a solid metal body that handles everyday cabinet use in kitchens, baths, and shop storage. The satin nickel finish delivers a muted metallic look that works well across many door and drawer styles, so one style can run through a whole room. Overall length is 3-7/8 inches, so the pull slightly overhangs the screw centers and covers existing 3 inch on-center holes. A projection of 1-1/2 inches creates space behind the pull for fingers to grab, supporting comfortable operation at doors and drawers. Width of 1-1/8 inches gives a compact front profile that fits smaller faces without crowding.

Key Studio Series Pull Details For Projects

• The 3 inch center to center dimension matches a common drilling pattern, allowing this pull to fit many cabinet and drawer fronts already laid out on that spacing, which reduces layout time during runs of multiple fronts.
• The 3-7/8 inch overall length extends slightly beyond the hole spacing, helping the pull visually cover the fastener locations and provide a clean line across the front of the cabinet or drawer.
• The 1-1/2 inch projection defines how far the pull stands off the surface, creating clearance for fingers between the hardware and the face frame or panel during everyday opening and closing.
• The 1-1/8 inch width keeps the pull compact on the face while leaving enough surface to grab, which is useful on narrower drawer fronts or smaller doors where hardware scale matters.
• The satin nickel finish provides a soft metallic tone that coordinates with many hinges and fixtures in similar finishes, helping maintain a consistent visual look across a project.
• The zinc die cast construction creates a single solid body for the pull, supporting repeated use on frequently opened doors and drawers in residential or light commercial settings.

Installation Dimensions For Accurate Cabinet Pull Layout

This Studio Series cabinet pull is designed around a 3 inch center to center screw layout, which sets the exact distance between the two fastener points and guides drilling on new cabinet doors and drawer fronts. With an overall length of 3-7/8 inches, the pull extends past the mounting points, so drilled holes on that spacing sit well inside the ends of the handle. A 1-1/2 inch projection defines standoff from the door or drawer, which is important when planning clearances near adjacent doors, walls, or trim. The 1-1/8 inch width impacts how much face area the pull covers, which helps with positioning on narrow frames or rail sections where hardware placement is tight.

Using The P3010-SN Satin Nickel Pull In Work

Where The 3 Inch Center To Center Pull Fits

The P3010-SN satin nickel pull from the Hickory Hardware Studio Series fits cabinets and drawers drilled on a 3 inch center to center pattern, which is common on many framed and frameless cabinet lines. Its 3-7/8 inch overall length works on door stiles and drawer rails without overpowering medium-size fronts, so it can run continuously across a kitchen or bath layout. The 1-1/2 inch projection gives hand room on both doors and deeper drawers, which is especially useful on heavier storage where a solid grip is important. With a 1-1/8 inch width, the pull sits comfortably on narrower drawer faces or small bath vanities, making it flexible across base, wall, and tall cabinet applications.

Details That Support Consistent Cabinet Pull Results

The defined 3 inch center to center measurement on this Belwith Keeler cabinet pull lets installers use jigs and templates built for that spacing, which helps repeat hole locations accurately from front to front. Zinc die cast construction provides a uniform shape, so each P3010-SN piece matches the next, keeping lines consistent when multiple pulls are aligned across a run of doors or drawers. The satin nickel finish offers an even surface tone over the pull body, which supports a cohesive look when several handles are mounted in sight lines like upper cabinet rows. Fixed dimensions of 3-7/8 inch length, 1-1/2 inch projection, and 1-1/8 inch width allow shop drawings and drilling guides to be set once, reducing layout variation between cabinets.

Common Questions About The P3010-SN Cabinet Pull

Selecting This Pull For Cabinet And Drawer Runs

The Hickory Hardware Studio Series pull with 3 inch center to center spacing, 3-7/8 inch length, and 1-1/2 inch projection gives a clear set of working dimensions for cabinet and drawer projects. The zinc die cast body and satin nickel finish define both handling feel and appearance across residential or light commercial runs. With fixed width at 1-1/8 inches and a standard 3 inch drilling pattern, this Belwith Keeler cabinet pull can be planned directly into layouts that call for consistent hardware sizing. For projects built around satin nickel cabinet hardware in the Studio Series, this pull aligns well with that specification.