Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Studio Series pull gives you a 3-3/4 inch (96 mm) center to center grip that works for standard cabinet and drawer layouts, so hole spacing aligns cleanly on typical face frames and drawer fronts. The pull is made from zinc die cast material, which creates a solid-feeling handle body that stays consistent across multiple pieces on the same job. Its satin nickel finish provides a muted metallic look that suits many contemporary and transitional cabinet styles without showing every fingerprint or mark as strongly as brighter finishes. Overall length is 4-3/4 inches, so the pull slightly overhangs the drilled centers for a proportional look on doors and drawers. A projection of 1-1/18 inch and width of 1-1/8 inch set the hand clearance and grip area, giving installers a predictable feel from one cabinet run to the next.
The 96 mm center to center dimension on this pull sets the hole spacing installers drill in doors and drawers, so templates and jigs can be set once and repeated down the run. With an overall length of 4-3/4 inches, the handle extends slightly beyond the mounting centers, which helps balance the look on both narrow and wider fronts. The 1-1/18 inch projection defines how far the pull stands off the surface, affecting hand clearance and how far hardware protrudes into walk paths. A width of 1-1/8 inch specifies the front face size, so designers and installers can coordinate this Hickory Hardware Studio Series pull visually with other handles and pulls in the same area.
This P3011-SN satin nickel pull belongs to the Studio Series collection, which positions it alongside related decorative hardware and moldings for cohesive cabinet projects. The 3-3/4 inch (96 mm) center to center size is a common choice on kitchen and bath cabinets, so it works naturally on many base, wall, and vanity fronts. Its 4-3/4 inch overall length gives it enough presence to use on both cabinet doors and medium-width drawers without looking undersized. Because it is made from zinc die cast material, the handle suits interior woodworking environments where metal decorative hardware is standard, such as residential kitchens, laundry rooms, and built-in storage. The satin nickel finish allows this Belwith Keeler cabinet pull to coordinate visually with other satin nickel components on the job, helping create a consistent hardware story from one room to another.
The defined 96 mm center to center measurement on this Hickory Hardware Studio Series pull allows installers to use fixed jigs or drilling templates for efficient, repeatable mounting across large cabinet runs. Having a 1-1/18 inch projection and 1-1/8 inch width gives predictable hand clearance and grip feel, which matters when standardizing hardware selection across multiple rooms or units. The 4-3/4 inch overall length provides a clear reference when laying out pulls relative to panel edges, so spacing from door and drawer margins stays visually consistent. The specified 8-32 x 1 inch screw size indicates the thread type used to secure the zinc die cast cabinet pull, which supports straightforward hardware selection when mounting into typical cabinet door and drawer thicknesses. With these dimensions defined, installers and designers can plan layout, drilling, and visual alignment for the P3011-SN satin nickel pull before stepping on site.
The Hickory Hardware Studio Series pull has a 3-3/4 inch (96 mm) center to center, 4-3/4 inch overall length, about 1-1/18 inch projection, and 1-1/8 inch width, which define layout, reach, and visual scale on cabinets.
The P3011-SN satin nickel pull is made from zinc die cast material, which provides a solid metal handle body suited to interior decorative cabinet hardware applications.
The 96 mm center to center spacing matches a common drilling pattern, so installers can use standard jigs and repeat the hole layout accurately across cabinet doors and drawers.
This Belwith Keeler cabinet pull has a satin nickel finish, giving projects a muted metallic look that coordinates with other satin nickel decorative hardware and moldings.
The Studio Series zinc die cast cabinet pull is used on interior cabinets and drawers, such as kitchen, bath, and built-in storage, where decorative handles and pulls are required.
The P3011-SN satin nickel pull uses 8-32 x 1 inch screw size, so mounting relies on this thread specification when fastening the pull to doors and drawers.
The Hickory Hardware Studio Series pull in satin nickel brings a 96 mm center to center layout, defined projection, and zinc die cast construction to cabinet and drawer projects. With its 4-3/4 inch overall length and 1-1/8 inch width, it fits comfortably across common door and drawer sizes used by professional shops and serious DIY installers. Specifying the P3011-SN satin nickel pull through Wurth Baer Supply aligns decorative hardware, dimensions, and finish so cabinet runs follow the same handle standard from one opening to the next.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SZ126SN Mfr# SZ126SN | PRO LUXE Studio Satin Nickel 1-1/4" (32 mm) L x 1-1/4" (32 mm) W Knob, SZ126SN |
