Hickory Hardware Studio Series 3-3/4" (96 mm) Center to Center Stainless Steel Pull, - P3011-SS

Hickory Hardware Studio Series Pull For Cabinets

Hickory Hardware Studio Series pull delivers a 3-3/4 inch (96 mm) center to center layout, so hole spacing lines up with the common cabinet drilling pattern on many jobs. The pull is part of the Studio Collection, giving installers and woodworkers a defined style family when planning a run of cabinets. The stainless steel finish presents a neutral, modern look that coordinates with a wide range of door colors and appliance finishes. Behind the finish, the zinc die cast material forms a solid body, so each handle feels substantial when mounted on doors or drawers. The 4-3/4 inch overall length gives a comfortable grasp area while still fitting narrower drawer fronts. With a 1-1/8 inch projection and 1-1/8 inch width, the pull stands off the surface enough for fingers to wrap behind it without crowding the face of the cabinet.

Key Studio Collection Pull Details For Jobs

• The 3-3/4 inch (96 mm) center to center dimension matches a widely used drilling pattern, which helps installers align multiple pulls across doors and drawer fronts on new builds or replacements.
• The stainless steel finish provides a clean, contemporary appearance that blends with many hinge and appliance finishes, supporting consistent hardware styling across a kitchen or office project.
• The zinc die cast construction creates a solid, single-piece body, which helps the pull feel sturdy in daily use when mounted on frequently opened doors or drawers.
• The 4-3/4 inch overall length gives enough bar to grip from different angles, which is useful on wider drawers or when users approach from the side of the cabinet run.
• The 1-1/8 inch projection and 1-1/8 inch width hold the hand away from the cabinet surface, which reduces knuckle contact with the door or drawer face as fronts are opened.
• The P3011-SS manufacturer part number ties this pull to the Studio Collection pattern, which helps trades track reorders and match existing installations accurately.

Installation-Oriented Dimensions And Mount Layout

The 96 mm center to center measurement defines the drilling layout, so installers can set jigs or drilling guides to that spacing for repeatable results along a run of cabinets. The 4-3/4 inch length tells you where the pull will land on narrower doors and drawer fronts, helping with visual proportion during layout. A 1-1/8 inch projection sets the standoff from the cabinet face, which affects clearance when doors open near walls or adjacent cabinets. The 1-1/8 inch width indicates how much rail space the pull occupies, which matters on face frames and narrow stiles. This pull uses 8-32 x 1 inch screws, so the threaded interface is standard cabinet hardware sizing that aligns with typical drawer and door thickness ranges.

Using The P3011-SS Pull In Cabinet Projects

Where This 96 mm Center Pull Fits Best

The 3-3/4 inch (96 mm) center to center spacing suits many base, wall, and vanity cabinet layouts, so the same pull can be used across upper and lower units for consistent alignment. The stainless steel finish pairs well with other stainless hardware elements, which is useful when coordinating knobs, hinges, and appliance handles within the same space. Because the pull is part of the Studio Collection, it connects to a defined design line, which helps designers and shop teams keep a unified look across multiple room phases or matching add-on cabinetry. The 4-3/4 inch overall length fits standard kitchen and bath door sizes comfortably, allowing the pull to sit clear of panel edges while still giving a centered, balanced appearance on most fronts.

Details That Support Repeatable Mounting Results

The 96 mm center dimension works smoothly with drilling templates and CNC setups because it is a precise metric spacing, so production shops can program or set jigs once and repeat the pattern across many fronts. The combination of 1-1/8 inch projection and 1-1/8 inch width defines a clear hand clearance envelope, which helps installers predict user comfort without test fitting multiple sizes. Zinc die cast construction means each pull is formed to a consistent shape, supporting uniform alignment when several are mounted in a straight line across drawer banks. The standard 8-32 x 1 inch screw size interfaces with common cabinet door and drawer thicknesses, simplifying hardware planning across a whole job. The P3011-SS designation clearly identifies this exact pull, which helps shops match replacements to existing runs when cabinets are repaired, extended, or updated later.

Common Questions About The P3011-SS Cabinet Pull

Select The Right Studio Pull For Your Run

The P3011-SS Hickory Hardware Studio Series pull combines a 3-3/4 inch (96 mm) center to center layout, 4-3/4 inch length, and 1-1/8 inch projection to support consistent cabinet drilling and comfortable use. The stainless steel finish and zinc die cast construction provide a defined look and solid feel that align with Studio Collection projects. With its 8-32 x 1 inch screw interface and clearly marked P3011-SS part number, this pull fits neatly into shop workflows for both new cabinet builds and matching expansions. Select this Studio Collection pull when a 96 mm center spacing and stainless steel appearance match your cabinet hardware plan.