300mm Heavy Duty L Bracket For Work Surfaces
300mm Heavy Duty L Bracket gives you a load rated support of up to 1,000 lb per pair, so a pair carries heavy countertops or shelves in workshop, garage, or commercial layouts without overbuilding the support structure.
The bracket uses 5 mm bar stock, creating a compact profile that still handles demanding loads, which helps when space under a work surface is tight but strength is critical.
The epoxy coated finish provides corrosion resistant performance, so the bracket stands up better in utility rooms, garages, and similar environments where moisture or chemicals are common.
This model is supplied in an epoxy white finish, which lets the support blend cleanly with light-colored shelving or casework where exposed hardware must look neat and consistent with surrounding components.
The bracket comes from Reeve Store Equipment Company in the workstation and countertop brackets class, so its proportions and rating are aimed at supporting counters, benches, and similar tops rather than light decorative shelving.
Key Bracket Details For Heavy Duty Jobs
- The 1,000 lb per pair load rating gives each matched pair the capacity for solid wood tops or tool-laden shelves, reducing flex in everyday service when installed into appropriate structure.
- The corrosion resistant epoxy coated finish protects the 5 mm bar stock from surface rust, which maintains both appearance and structural integrity in typical shop or storage conditions.
- The epoxy white finish option lets installers coordinate with white melamine or painted shelving, so the support visually recedes instead of drawing attention under cabinets or counters.
- The 300mm length defines the bracket reach, helping you match depth to common shelf or countertop projections, which supports sizing decisions during layout and planning.
- The workstation and countertop brackets product class signals that this bracket is intended for workstations and counters, aligning its strength and geometry with heavier, frequently used surfaces.
Lag Bolt Mounting For Solid Stud Attachment
The bracket is designed to mount into or through a wooden stud using lag bolts sized 5/16" x 3" or longer, so the load transfers directly into framing rather than relying on wall coverings.
This lag bolt guidance pairs with the 1,000 lb per pair rating, because embedding 5/16" diameter bolts into a wooden stud helps the bracket reach its intended capacity in normal wall construction.
Mounting into or through a stud gives you placement flexibility during layout, since you can either land the bracket over a stud face or pass the lag bolts through sheathing into the stud behind.
The 300mm reach works with the stud-mounted design to support typical countertop or shelf depths, which simplifies laying out bracket spacing along a wall or under a work surface.
Using This Reeve Bracket In Real Projects
Where This 300mm L Bracket Fits Best
The 300mm L-Bracket, Epoxy White Finish from Reeve Store Equipment Company belongs in shelf, closet, and garage organization projects where heavier loads are expected, because its 1,000 lb per pair rating is sized for substantial weight.
The workstation and countertop brackets classification aligns it with workbenches, counters, and similar tops, so it suits applications where frequent loading and unloading happens across the surface during daily use.
In closet builds, the 300mm length helps support deeper shelves that carry storage bins or folded materials, and the white epoxy finish coordinates with common white laminate systems used in these spaces.
In garage and shop areas, the corrosion resistant epoxy coated finish protects the 5 mm bar stock when exposed to humidity, temperature swings, and airborne dust, which supports long-term use in these tougher conditions.
The epoxy white finish also keeps the bracket visually understated beneath light worktops, which matters in finished workrooms or retail backrooms where exposed support hardware should not dominate the look.
Details That Support Consistent Load Performance
The 1,000 lb per pair load rating gives installers a clear target when spacing brackets, because knowing what each pair can carry helps determine how many supports are needed along a span for a given project.
The callout for mounting into or through a wooden stud with 5/16" x 3" or longer lag bolts ties the capacity directly to stud-based installations, which aligns load performance with common wall framing practices.
The 5 mm bar stock material creates a compact but strong bracket arm, so the support does not consume excessive under-counter room while still aligning with the heavy duty label in the SAP description.
The corrosion resistant epoxy coated finish reduces surface degradation in normal indoor utility environments, which supports consistent performance of the steel beneath the coating during the bracket's service life.
The specific manufacturer part number I-208-300-W identifies this exact 300mm white epoxy version, so specifying or reordering the same bracket style across multiple stations or locations stays straightforward.
The placement in shelf, closet, and garage organization combined with workstation and countertop classification indicates that this single pattern can standardize support across storage shelves and work surfaces, simplifying product selection on repeat projects.
Common 300mm Heavy Duty L Bracket Questions
What load can this 300mm Heavy Duty L Bracket support?
The 300mm Heavy Duty L Bracket is load rated at up to 1,000 lb per pair, so a properly mounted pair handles substantial countertops or shelves in workshop, garage, or storage applications.
How should this bracket be mounted to a stud wall?
The bracket is designed to mount into or through a wooden stud using lag bolts sized 5/16" x 3" or longer, which directs the load into the wall framing.
What is the finish on this Reeve 300mm L bracket?
The 300mm L-Bracket has a corrosion resistant epoxy coated finish in white, so it blends with light shelving while helping protect the metal from surface rust.
What does the 300mm length mean for shelf depth?
The 300mm dimension identifies the bracket reach, which helps you match it to common shelf or countertop depths when planning support spacing and layout.
What material size is used in this heavy duty L bracket?
The bracket uses 5 mm bar stock, providing a compact profile that still supports the heavy duty rating described for this workstation and countertop bracket.
What does the part number I-208-300-W represent?
The manufacturer part number I-208-300-W identifies the 300mm heavy duty L bracket in epoxy white finish, helping match this specific model across multiple installations.
Select This Bracket For Heavy Counter Support
The 300mm Heavy Duty L Bracket from Reeve Store Equipment Company combines a 1,000 lb per pair load rating, 5 mm bar stock construction, and a corrosion resistant epoxy white finish for workstation and countertop use.
The design mounts into or through a wooden stud with 5/16" x 3" or longer lag bolts, so each bracket engages the framing to support deeper shelves and counters in closets, garages, and work areas.
For projects calling for consistent heavy duty support across multiple stations or bays, this specific 300mm Reeve bracket part number I-208-300-W provides a repeatable choice within shelf, closet, and garage organization layouts.
