500mm L-Bracket, Epoxy White Finish

500mm Heavy Duty L Bracket For Shelving Support

500mm Heavy Duty L Bracket gives you a steel support arm sized for deeper shelves, counters, or work surfaces where a short bracket is not enough. The 500mm length places support further under the load, which helps carry countertop or shelf depth without awkward overhangs. Load rating at up to 1,000 lb per pair means a properly spaced set of brackets handles demanding storage or workstation loads. This bracket sits in the Workstation and Countertop Brackets class, so it suits tasks where static and concentrated loads are common. The Reeve Store Equipment Company design uses 5 mm bar stock, providing a solid steel section that resists flex under typical shop or closet loads. Corrosion resistant epoxy coated finish in white helps the bracket hold up in normal interior environments while matching light-colored shelving runs.

Key L Bracket Details That Support Real Loads

• Load rated at up to 1,000 lb per pair gives you capacity for heavy shelving or counters, so you can plan storage or worktops with confidence around known performance.
• 500mm length supports deeper shelves and counters, bringing the bearing point closer to the front edge so the surface feels solid instead of springy during use.
• 5 mm bar stock construction provides a substantial steel section, which helps the bracket resist bending when heavily loaded along walls or workstation runs.
• Corrosion resistant epoxy coated finish in white protects the steel in normal interior conditions, helping the bracket maintain appearance and service life behind shelving.
• Design intended to mount into or through a wooden stud using 5/16 x 3 or longer lag bolts ties the bracket directly into framing, which supports the stated load rating in service.

Mounting The 500mm L Bracket To Wooden Studs

This 500mm L Bracket is intended to mount into or through a wooden stud using lag bolts sized 5/16 x 3 or longer. That specific fastener size and embedment length helps transfer shelf or countertop loads into the stud rather than just the wall face. Mounting into the stud allows the up to 1,000 lb per pair load rating to be used in real installations. The 500mm length gives room for multiple lag bolts along the vertical leg, which spreads the load and supports taller bracket spacing on the wall. Using a bracket from the Workstation and Countertop Brackets class keeps the geometry and strength in line with heavier-duty interior applications.

Using This Workstation And Countertop Bracket Effectively

Where The 500mm L Bracket Performs Best

The 500mm L Bracket from Reeve Store Equipment Company sits in the Shelf, Closet & Garage Organization and Shelving & Accessories category, so it fits projects where you need fixed wall-mounted support for storage or work surfaces. The 500mm reach suits deeper shelving, countertops, or workstations, where shorter supports leave the front edge under-supported. With a load rating up to 1,000 lb per pair, pairs spaced along wooden studs can support dense items on garage shelves or heavier tools on a counter. The epoxy white finish helps this workstation and countertop bracket blend with white melamine or painted shelving, which is useful in closets or clean work areas. Corrosion resistance from the epoxy coated finish supports long-term use in interior garage or shop environments where humidity or occasional moisture are present but not extreme.

Details That Help Deliver Repeatable Support Results

The I-208-500-W part number identifies this specific 500mm Heavy Duty L Bracket in epoxy white, which helps you repeat the same component along a wall run or match existing installations. Using 5 mm bar stock means each bracket has a known steel thickness, giving consistent stiffness from one bracket to the next across a shelving system. The design expectation to mount into or through a wooden stud with 5/16 x 3 or longer lag bolts standardizes how loads transfer to framing, which simplifies layout when repeating brackets on 16-inch or 24-inch centers. The load rating of up to 1,000 lb per pair lets you calculate bracket spacing based on expected loads, supporting more predictable performance over time. Being in the Workstation and Countertop Brackets class also signals that this bracket is sized and shaped for horizontal surfaces where people work, not just light duty display shelves.

Common Questions About The 500mm L Bracket

Selecting This 500mm L Bracket For Your Project

The 500mm Heavy Duty L Bracket from Reeve Store Equipment Company pairs a 500mm reach with a load rating up to 1,000 lb per pair, making it suited to deeper, heavier shelves or counters anchored to wooden studs. The 5 mm bar stock and corrosion resistant epoxy white finish give you a sturdy, clean-looking support for interior storage or workstation runs. When you need a workstation and countertop bracket that mounts with 5/16 x 3 or longer lag bolts into wooden framing, this 500mm L Bracket is a focused option.