300mm L-Bracket, Epoxy Black Finish

300mm Heavy Duty L Bracket For Work Surfaces

300mm Heavy Duty L Bracket gives a rated load capacity of up to 1,000 lb per pair, so two brackets support substantial workstation, countertop, or garage shelving loads without flexing under typical shop or storage use. The 300mm length positions support further under a shelf or top, helping distribute weight toward the stud or wall structure. This bracket is classified under workstation and countertop brackets, aligning its geometry and strength with heavier-duty applications beyond light closet shelving. The bracket uses 5 mm bar stock, creating a solid section that resists twisting when side loads are applied along a counter edge. The black epoxy coated finish adds a corrosion resistant layer over the steel, extending service life in typical indoor environments where moisture or spills may reach the wall hardware. The black finish also helps the bracket visually recede under darker tops and shelving runs.

Key Heavy Duty L Bracket Job Advantages

• Load rating of up to 1,000 lb per pair lets two brackets carry heavy countertops, work surfaces, or dense storage without overstressing the support points when properly spaced.
• 300mm length provides deeper support under shelving or tops, improving leverage against sag at the front edge in many wall-mounted layouts.
• Corrosion resistant epoxy coated finish shields the underlying steel from moisture exposure, which supports long-term performance in closets, garages, and workstations.
• Black epoxy finish offers a dark, uniform appearance that blends with many dark shelves or tops, reducing visual distraction beneath the surface.
• 5 mm bar stock construction gives the bracket a solid profile that resists bending and racking forces, which matters when loads are concentrated or frequently shifted.
• Workstation and countertop bracket classification signals a design aimed at heavier-duty service compared with light decorative shelf supports.

Lag Bolt Mounting And Stud Engagement Details

The bracket is designed to mount into or through a wooden stud using lag bolts sized 5/16 inch by 3 inch or longer, creating a strong shear connection between the bracket and framing. Driving 5/16 inch lag bolts through the bracket into the stud helps transfer the rated load directly into the wall structure rather than relying on finishes alone. The specification of 3 inch or longer lag bolts provides thread length deep in the stud, which supports pull-out resistance when vertical loads and occasional impact loads act on the front of the shelf or counter. Mounting into a wooden stud aligns with typical residential and light commercial wall construction, simplifying layout for installers working on closets, garages, or shop walls.

Using The 300mm L Bracket In Real Projects

Where This 300mm L Bracket Performs Best

This 300mm L-Bracket, identified as manufacturer part I-208-300-B from Reeve Store Equipment Company, is categorized for shelving and accessories within shelf, closet, and garage organization, so its geometry supports flat horizontal surfaces fixed to vertical framing. In workstation and countertop bracket service, the 300mm projection allows support further under deeper tops, which is useful for workbenches or utility counters needing stronger wall anchoring. The load rating of up to 1,000 lb per pair suits installations where dense tools, supplies, or materials rest on the surface, reducing risk of deflection when configured appropriately. In closet or garage storage runs, the black epoxy coated finish helps the bracket blend beneath darker shelving while its corrosion resistant properties handle typical indoor humidity. The 5 mm bar stock section gives the bracket a compact yet substantial profile that fits under many standard shelves without consuming excessive vertical space along the wall.

Details That Support Consistent Mounting Results

The requirement to mount into or through a wooden stud with 5/16 inch by 3 inch or longer lag bolts standardizes the installer workflow around a specific fastener size and embedment depth. Using 5/16 inch lag bolts through the bracket aligns the bracket holes with common installer tooling, helping achieve predictable torque and bite into the stud. Specifying 3 inch or longer lag bolts means the threaded portion engages deep within the stud, which supports consistent load transfer for the rated 1,000 lb per pair when spacing and layout are designed around that capacity. The 300mm projection dimension lets installers plan consistent bracket spacing beneath counters and shelves, helping align front edges while keeping support points clear of drawers or under-counter equipment. The epoxy coated black finish resists corrosion around the lag bolt heads and contact edges, which helps each mounted bracket maintain its structural role over time without surface degradation at the wall interface.

Practical Questions About This Heavy Duty Bracket

Selecting This 300mm Bracket For Heavy Surfaces

The 300mm Heavy Duty L Bracket from Reeve Store Equipment Company combines a 1,000 lb per pair load rating with 5 mm bar stock and a corrosion resistant black epoxy coated finish, giving installers a defined option for workstation, countertop, closet, or garage shelving projects. Mounting into a wooden stud with 5/16 inch by 3 inch or longer lag bolts ties the bracket directly into framing, supporting demanding loads across deeper 300mm projections. For projects calling for a heavy duty L bracket with a dark, durable finish, this I-208-300-B model aligns well with shelving and accessory applications in the shop or storage areas.