400mm L-Bracket, Epoxy Black Finish

400mm Heavy Duty L Bracket For Workloads

400mm Heavy Duty L Bracket defines this Reeve Store Equipment Company support as a bracket built for substantial workstation, countertop, or shelving loads where a metal L-shape carries the weight back to the wall. The 400mm length gives a deep support arm that reaches under wider work surfaces, helping distribute weight across more area. The manufacturer load rating of up to 1,000 lb per pair means a properly mounted pair can handle heavy-duty applications, supporting dense materials or equipment without overstressing the bracket itself. The work-focused role in workstation and countertop brackets makes it suitable where a rigid, fixed support is preferred over adjustable systems. The black epoxy finish on this L-bracket identifies it visually for projects calling for dark hardware, helping it blend with darker tops or wall finishes in shops, garages, or commercial work areas.

Key L Bracket Details For Real Jobs

• The bracket is part of the workstation and countertop brackets class, so its geometry and strength serve counters, benches, and similar surfaces that demand stable, long-term support in woodworking and shop environments.
• A manufacturer load rating of up to 1,000 lb per pair means when one pair is used, the metal bar stock construction is designed to carry very heavy static loads, important for supporting tools or material stacks.
• The bracket is produced from 5 mm bar stock, giving a solid steel section that resists flex under load, so countertops and shelves stay level instead of sagging when weight is applied near the outer edge.
• A corrosion resistant epoxy coated finish provides a protective layer on the metal, reducing surface corrosion in typical indoor garage, shop, or utility room conditions where humidity and dust are present.
• The black epoxy finish on this version offers a neutral, low-glare appearance, helping the bracket visually recede under dark tops or against dark walls while still providing heavy duty structural support.

Mounting And Load Transfer For This Bracket

This L-bracket is designed to mount into or through a wooden stud using lag bolts sized 5/16 inch x 3 inch or longer, so load transfers deeply into the framing instead of just the wall face material. That mounting detail gives the 400mm Heavy Duty L Bracket a direct path to the stud, which supports the stated load rating of up to 1,000 lb per pair when properly used with framing. The 5 mm bar stock section works with the stud mounting method so the vertical leg carries compression into the wall while the horizontal leg supports the shelf or top. Mounting into or through a wooden stud with substantial lag bolts helps control bracket movement under load, keeping countertops and shelves steady during everyday work.

Using This 400mm L Bracket In Projects

Where This Heavy Duty L Bracket Fits Best

This 400mm L-Bracket, Epoxy Black Finish, from Reeve Store Equipment Company fits applications in the Shelf, Closet & Garage Organization category where a deep, strong support leg is needed under shelving or worktops. As a workstation and countertop bracket, it suits benches, counters, and storage runs where a 400mm projection supports wider tops, allowing full-depth work surfaces common in shops or garages. The manufacturer part number I-208-400-B identifies this specific black, heavy duty version, helping match it to other identical brackets in a run so all supports share the same load rating and finish. When used in pairs, the up to 1,000 lb per pair load rating allows planning heavy storage locations, like tool zones or material staging areas, around the bracket capacity.

Details That Support Consistent Mounting Results

The 5 mm bar stock construction provides predictable stiffness across brackets with the same designation, so installers can expect similar deflection behavior across all supports in a project run. The corrosion resistant epoxy coated finish on the black surface helps maintain a consistent appearance over time in indoor utility spaces, as the coating forms a barrier between the steel and airborne moisture. Using lag bolts sized 5/16 inch x 3 inch or longer into or through a wooden stud gives installers a clear fastener and framing target, simplifying layout where multiple brackets must share a continuous countertop or shelving line. The 400mm extension length from the wall works with this mounting approach so tops can be sized to take advantage of the full support depth, helping control edge sagging even when loads sit near the front of the work surface.

Common Questions About The 400mm L Bracket

Selecting This Bracket For Heavy Support Runs

The 400mm Heavy Duty L Bracket from Reeve Store Equipment Company combines a 400mm projection, 5 mm bar stock construction, and an up to 1,000 lb per pair load rating to support demanding shelving, closet, and garage organization work. The corrosion resistant epoxy coated black finish adds both protection and a neutral appearance for visible installations. With mounting designed into or through a wooden stud using 5/16 inch x 3 inch or longer lag bolts, this workstation and countertop bracket offers a defined approach for transferring heavy loads back to the framing. For projects needing dependable fixed supports under deep countertops or shelves, this 400mm L-bracket provides a clearly specified option.