550mm Heavy Duty L Bracket For High Loads
550mm Heavy Duty L Bracket describes a Reeve Store Equipment Company support bracket built for workstation and countertop use where substantial load capacity is required. The bracket is load rated at up to 1,000 lb per pair, so properly planned pairs handle heavy countertops, benchtops, or deep shelving in shop, garage, or commercial storage layouts. The 550mm length gives a long horizontal leg, which supports wider tops and deeper shelves without extra intermediate supports, helping keep layouts cleaner. The bracket is part of the workstation and countertop brackets class, so it suits projects where the support must carry both static storage weight and regular working loads. A defined manufacturer part number, I-208-550-B, gives installers a precise identifier for matching multiples across a project.
Key L Bracket Details That Support Real Work
- The bracket is load rated at up to 1,000 lb per pair, which supports heavy materials like thick countertops or dense storage loads while limiting deflection over the span.
- The epoxy coated finish is corrosion resistant, so the bracket resists surface deterioration in typical interior shop, garage, or utility environments where occasional moisture or airborne contaminants are present.
- The black epoxy finish provides a dark, uniform appearance, which helps the bracket visually recede under dark tops or shelving runs while still matching other black hardware.
- The bracket uses 5 mm bar stock construction, so the supporting members are solid steel bar rather than light sheet, providing a rigid arm that better maintains angle under rated loads.
- The bracket mounts into or through a wooden stud using 5/16 x 3 inch or longer lag bolts, giving a strong mechanical connection into structural lumber for predictable load transfer.
Stud Mounting And Lag Bolt Setup Details
The bracket mounts into or through a wooden stud using 5/16 x 3 inch or longer lag bolts, so loads move directly into framing rather than relying on finish surfaces. Using lag bolts of that diameter and length creates substantial thread engagement in the stud, which supports the up to 1,000 lb per pair rating when the structure is designed accordingly. The 5 mm bar stock construction keeps the angle between vertical and horizontal legs stable once anchored, reducing flex as weight is added along the 550mm projection. The corrosion resistant epoxy coated finish protects the steel at the mounting points and along the arms, which is valuable where brackets are exposed in utility spaces over time.
Using This 550mm L Bracket In Real Projects
Where This Heavy Duty L Bracket Excels
This bracket sits in the workstation and countertop brackets product class, which positions it for work surfaces, counters, and shelving that see frequent use. The 550mm L Bracket dimension supports deeper tops, allowing heavy-duty workstations or garage benches to project further from the wall while staying supported along their depth. Load rating at up to 1,000 lb per pair means pairs can support dense tools, supplies, or stock placed across the supported span, when applied within structural limits. The black epoxy finish pairs well with darker tops or shelving, so visible installs in shops or retail back rooms maintain a consistent look. The corrosion resistant epoxy coated finish also suits utility rooms or garages where occasional humidity or accidental splashes could contact the steel.
Details That Help Achieve Repeatable Install Results
The combination of 5 mm bar stock construction and lag bolt mounting using 5/16 x 3 inch or longer fasteners gives the bracket a predictable structural path from shelf to stud. That construction keeps the vertical leg stiff, so repeated loading and unloading during service does not readily distort the angle that supports the work surface. The up to 1,000 lb per pair load rating provides a defined capacity when planning the number of brackets along a run, helping installers distribute support based on expected loads. The epoxy coated black finish reduces surface friction during handling compared to raw steel, which helps during positioning against finished walls. The defined manufacturer part number I-208-550-B helps shops reorder the same bracket for expansions, keeping bracket type and performance consistent across multiple bays or locations.
Common Questions About This 550mm L Bracket
What load can the 550mm Heavy Duty L Bracket support?
The 550mm Heavy Duty L Bracket is load rated at up to 1,000 lb per pair, allowing heavy countertops, work surfaces, or shelving runs when the surrounding structure supports that load.
How is this L bracket mounted to the wall?
The L bracket mounts into or through a wooden stud using 5/16 x 3 inch or longer lag bolts, transferring shelf loads into structural lumber for stronger support.
What is the finish on the Reeve 550mm L Bracket?
The Reeve 550mm L Bracket has a corrosion resistant epoxy coated finish in black, which protects the steel and gives a uniform dark appearance in exposed installations.
What material size is used in this heavy duty L bracket?
The heavy duty L bracket uses 5 mm bar stock, providing a solid steel section that resists bending and helps keep the bracket angle stable under load.
What does the 550mm length mean for my shelving depth?
The 550mm length indicates a long support leg, so it suits deeper shelves or countertops, allowing significant projection from the wall while remaining supported.
What is the manufacturer part number for reordering?
The manufacturer part number is I-208-550-B, which identifies this specific 550mm Heavy Duty L Bracket for matching future orders to existing installations.
Choose This Bracket For High-Capacity Support
The 550mm L-Bracket, Epoxy Black Finish from Reeve Store Equipment Company combines up to 1,000 lb per pair load rating with 5 mm bar stock construction, giving installers a defined-capacity support for deeper worktops and shelving. The corrosion resistant epoxy coated finish in black suits utility, shop, and garage spaces where exposed steel must tolerate everyday interior conditions. Mounting into or through a wooden stud with 5/16 x 3 inch or longer lag bolts delivers a strong structural connection for workstation and countertop brackets. For projects needing a consistent bracket type across multiple bays, the I-208-550-B part number provides a reliable reference.
