Würth 18 Gauge x 1/4" Crown x 1"L Staple, S18100K - 5000/Box

Wurth 18 Gauge 1 Inch Staple For Woodwork

Wurth 18 gauge 1 inch staple describes a Wurth staple with 18 gauge wire, a 1/4 inch crown, and 1 inch length, so each fastener is sized for light structural fastening in woodworking assemblies where a narrow crown is preferred. The product is classified by Wurth Baer Supply in the Staples product class, so it is meant for use wherever staples are the appropriate fastener in cabinet and millwork shops. The manufacturer part number S18100K identifies this specific combination of gauge, crown, and length, which helps match it to tools and job requirements on repeat projects. The web description lists the category Fasteners|Staples, so it is part of the broader fastening system used alongside other fastener types in the shop. The web description notes that the staple is sold in full box quantities only, which supports consistent supply for production runs where repeated fastenings are required.

Key Staple Details For Woodworking Tasks

• The staple uses 18 gauge wire, which provides a balance of penetration and holding for woodworking tasks where a slimmer fastener reduces splitting while still giving reliable grip on casebacks, paneling, and similar work.
• The staple has a 1/4 inch crown, which concentrates holding power in a narrow strip, helping keep the fastener discreet on visible trim, moldings, and interior casings while still tying materials together across the joint line.
• The staple length is 1 inch, allowing the legs to reach through thin materials into a substrate, which is useful when fastening underlayment, cabinet backs, or glue blocks where consistent depth is part of a repeatable assembly method.
• The product is described under Fasteners and Staples, so it is intended as a core fastening option in cabinet assembly, door and window casings, and similar wood constructions where staples speed production compared with slower fastening methods.
• The web description references Wurth as the brand, which ties this staple into the Wurth Baer Supply range of woodworking-focused fasteners, helping shops standardize on a known product family across multiple assembly stations.

Staple Fit And Tool Matching For Installation

The web description states that this staple fits tools such as Senco Finish Pro 2N1, LN4450, KMN4450M, SLS25XP, SLS20L, SLS15L, SLS18L, SLS18NR, SKS-L; Porter Cable NS150A, NS100; and Fasco F21P 90-250A, F21T 90-40A, F3C 90-40CT and similar models, so installers using those staplers can match this staple size directly to their existing equipment. This tool-fit detail supports efficient installation because crews can load the staples into listed staplers without changing over to different fastener formats for cabinet assembly, trim, or casework lines. The combination of 18 gauge, 1/4 inch crown, and 1 inch length described in the product data works with the specified tools to deliver consistent drive depth on typical wood substrates.

Using The S18100K Staples Across Wood Projects

Where This Wurth S18100K Staple Performs Best

The web description lists applications such as casebacks, pre-hung door and window units, paneling, interior trim, underlayment, drawers, lattice, moldings, door and window casings, cabinet assembly, glue blocks, backs, and cabinet box assembly, so the staple is positioned for a wide range of interior wood and composite materials. In casebacks and cabinet backs, the 18 gauge, 1 inch leg length creates enough bite into the cabinet sides or stretchers to hold panels flat, which matters for keeping boxes square in production. On pre-hung door and window units, the 1/4 inch crown offers fastening that stays relatively narrow along the jambs, helping keep the fastening line controlled for later finishing work. For paneling and interior trim, the gauge and crown work together so the staple can sit in smaller profiles without dominating the face, which is useful when trim will be finished or visually exposed. In underlayment and similar sheet applications, the 1 inch leg allows multiple layers to be secured to a substrate, supporting uniform fastening patterns across the floor area.

Why These 18 Gauge Staples Support Repeatable Results

The combination of 18 gauge wire, 1/4 inch crown, and 1 inch length described for the S18100K staple provides a consistent fastener profile, so production teams can standardize air pressure, depth settings, and layout when using the listed compatible tools. Because the same staple size handles tasks from drawers and lattice to cabinet box assembly and glue blocks, as detailed in the web description, shops can run multiple operations without changing staple dimensions, which simplifies setup across benches. The narrow 1/4 inch crown focuses holding where it is needed across joints in moldings and door and window casings, so the fastener pattern remains predictable when aligning pieces. The S18100K manufacturer part number clearly tags this exact combination of size attributes in Wurth Baer Supply records, which aids reordering and keeps repair or expansion work tied to the original staple specification. The Fasteners|Staples classification anchors it as part of the fastening workflow, so crews can treat it as a standard item in cabinet, trim, and unit assembly processes.

Common Questions About Wurth 18 Gauge 1 Inch Staples

Select Wurth S18100K Staples For Wood Projects

The Wurth S18100K staple combines 18 gauge wire, a 1/4 inch crown, and a 1 inch leg length, tying directly to applications such as casebacks, cabinet box assembly, underlayment, and interior trim listed in the product data. Fits-tools information covers Senco, Porter Cable, and Fasco models, so shops using those staplers can match this staple to their equipment for cabinet assembly, door and window units, and paneling tasks. For woodworking operations that rely on Fasteners|Staples as a core fastening method, this defined size offers a consistent option for repeatable interior assemblies.