Würth 18 Gauge x 1/4" Crown x 1-1/8"L Staple, S18113K - 5000/Box

Wurth 18 Gauge 1-1/8 Inch Staple For Woodwork

Wurth 18 gauge 1-1/8 inch staple describes a narrow crown staple sized for detail fastening where a slim fastener is needed to hold components without heavy surface disruption. The 1/4 inch crown focuses the holding power into a tight track, which matters when fastening small moldings, lattice, or trim where visible fastener width must stay minimal. The 1-1/8 inch leg length reaches through typical cabinet components, casebacks, and underlayment, so the staple can bite firmly into the framing or substrate. Being classified under fasteners and staples keeps this product aligned with standard shop and jobsite staple inventories, helping installers match it to known tasks. The S18113K manufacturer part number gives a precise reference for repeat ordering or specifying the same fastener across multiple jobs.

Key Staple Details For Woodworking Tasks

• The 18 gauge wire size provides a relatively small fastener diameter, so driven staples leave a modest footprint that works well on interior trim, moldings, and finished cabinet components where surface appearance affects finish work.
• The 1/4 inch crown concentrates holding across a narrow width, so the staple fits into tight profiles on lattice, door and window casings, and drawer parts while still delivering a secure mechanical grip along the crown line.
• The 1-1/8 inch leg length allows the staple legs to penetrate common materials used in cabinet box assembly, casebacks, and underlayment, which supports solid attachment into backing members without oversizing the fastener.
• Classification as staples within the fasteners category aligns this item with typical woodworking fastening systems, so shops can integrate it into staple-based assembly processes without changing established tool setups.
• Brand identification as Wurth supports consistent sourcing across multiple projects, so shops using Wurth Baer Supply for fasteners can streamline purchasing for repeat cabinet, trim, or door unit work.

Staple Fit With Named Professional Staplers

This Wurth S18113K staple fits a range of named staplers, which ties the fastener directly to tools commonly found in cabinet and trim shops. Listed Senco tools such as Finish Pro 2N1, LN4450, KMN4450M, SLS25XP, SLS20L, SLS15L, SLS18L, SLS18NR, and SKS-L give installers clear alignment between this staple and specific Senco staplers used for detail fastening. Porter Cable NS150A and NS100 staplers are also named, helping crews using these tools select a staple length and gauge already matched to their equipment. The staple also fits Fasco tools F21P 90-250A, F21T 90-40A, and F3C 90-40CT, which extends use into shops running Fasco stapling platforms on assembly lines. Mention of similar models highlights that the staple is intended for staplers in this general class, so teams standardizing on these tools can keep a single staple type tied to many stations.

Using This Staple Across Shop And Site

Staple Applications In Cabinet And Trim Work

This staple is specified for cabinet assembly tasks such as cabinet box assembly, cabinet assembly, glue blocks, and backs, which positions it as a core fastener in casework construction. In these roles, the 1-1/8 inch leg length anchors panels, backs, and internal blocks together while the 18 gauge profile helps maintain a cleaner interior appearance. Applications also span drawers, where the narrow 1/4 inch crown fits along drawer sides and bottoms without crowding the material, supporting tight drawer construction. For interior trim, moldings, door and window casings, and lattice, the staple secures thin or decorative profiles while limiting visible crown width along painted or stained surfaces. Casebacks are specifically called out, indicating this fastener is sized to pull thin back panels tight to cabinet framing, which is important for keeping cabinets square during installation. Underlayment fastening is also listed, so the staple can tie down sub-floor underlayment in light-duty interior settings where a narrow crown fastener is appropriate.

Fastener Choice For Consistent Assembly Results

The defined application list, covering casebacks, pre-hung door and window units, paneling, interior trim, underlayment, drawers, lattice, moldings, and cabinet box assembly, gives installers a repeatable map of where this fastener can be used in daily work. By aligning one staple size to many tasks, shops can reduce fastener variation across assembly benches, which simplifies tool setup around 18 gauge staples and 1/4 inch crowns. Connection to specific Senco, Porter Cable, and Fasco staplers helps maintain consistent driving performance, because the staple dimensions and tool magazines are already matched. When cabinet, door unit, and trim teams run the same S18113K staple, workstations from case assembly to finish trim can operate with predictable penetration and holding behavior. The Wurth branding and S18113K part reference also support standardization across purchase orders, so production managers can call out one fastener for repeated runs of cabinets, doors, or trim packages without re-specifying dimensions each time.

Common Questions About Wurth S18113K Staples

Select This Staple For Stapler-Matched Tasks

The Wurth 18 gauge x 1/4 inch crown x 1-1/8 inch staple S18113K ties directly to applications such as casebacks, cabinet assembly, drawers, paneling, and interior trim, so it slots into everyday woodworking tasks. Matching fit to specified Senco, Porter Cable, and Fasco staplers keeps fastener selection straightforward across crews using those tools. Choosing this defined size and application range helps cabinet shops and installers standardize one staple across casework, door and window units, underlayment, and finish trim runs for consistent fastening behavior.