8mm x 70mm brad point boring bit gives you an 8mm diameter cutting tip with a 70mm length, so you can bore clean, consistent holes sized correctly for 8mm joinery and fitting hardware in cabinet and furniture work. The right hand rotation design turns clockwise, matching standard right hand boring spindles for predictable feed and chip ejection. Brand identification as Amana Tool ties the bit to a recognized tooling line, which helps you match it with other Amana setup components in the shop. A 10mm shank interfaces with boring machines set up for 10mm tooling, letting you swap this bit directly into existing 10mm chucks or collets. The manufacturer part number 204008 provides a precise reference, which matters when you need to reorder the same diameter, length, and rotation across multiple machines or jobs.
The 10mm shank on this Amana Tool brad point boring bit is sized for boring machines that hold 10mm tooling, so you mount it directly into correctly sized chucks without altering the shank. The design as a right hand tool means the bit is driven clockwise, which matches right hand boring heads and maintains expected cutting action when indexing multiple spindles. Its role as a boring bit for machine use, not for portable drills or routers, positions it in fixed setups where the spindle is guided by the machine, supporting repeatable alignment from part to part.
This 8mm x 70mm brad point boring bit operates in boring machines designed for 10mm shank tooling, which ties it directly into line-boring or dedicated cabinet boring equipment. The right hand, clockwise rotation allows the bit to run on spindles configured for right hand tools, giving consistent performance alongside other right hand boring bits. In setups where drill presses are used, the product family note about 3/8 inch shank versions for drill presses helps separate tooling between machine types, so this 10mm shank version stays with boring machines that match its interface. The SAP description listing it as 8MM BRAD POINT RH 70MM LONG confirms the 8mm size, right hand rotation, and 70mm length, keeping its role clear in tooling inventories and tool boards.
The brad point design on this Amana Tool brad point boring bit is intended for accurate hole starting, which helps position holes precisely when jigs or multi-spindle heads bring the work to the bit. The 8mm diameter gives a fixed reference size, so dowels or fittings specified for 8mm holes seat properly when hole sizing matches drawings. A 70mm long bit body provides working reach for common cabinet and furniture boring depths, maintaining guidance along the length as the bit advances. Right hand, clockwise rotation standardizes cutting direction on machines set for RH tools, which simplifies spindle configuration and reduces the chance of mixing opposite-rotation bits in the same head. The manufacturer part number 204008 functions as a stable identifier in tooling lists, so maintenance and purchasing track exactly the same boring bit when replacing worn tools.
The 8mm x 70mm brad point boring bit is designed around an 8mm diameter, so it produces holes sized for 8mm components when boring in compatible woodworking materials.
This Amana Tool brad point boring bit uses a 10mm shank, aligning with boring machines that accept 10mm tooling in their chucks or collets for direct mounting.
The right hand rotation means the bit turns clockwise, so it is suited to right hand spindles, keeping cutting action and chip flow consistent with other RH boring tools.
The web description identifies drill presses with a 3/8 inch shank version in the same family, while this specific bit is defined for 10mm shank boring machine setups.
The web description states that this bit is not for use in portable drills or routers, so its role is limited to fixed boring machines or appropriate presses.
The 204008 designation is the manufacturer part number for this 8MM BRAD POINT RH 70MM LONG bit, helping shops order the same size and configuration consistently.
This Amana Tool 8mm x 70mm brad point boring bit pairs an 8mm cutting diameter with a 10mm shank, matching boring machines that run 10mm tooling while delivering holes sized for 8mm components. The right hand, clockwise rotation keeps it aligned with RH spindle setups already in service. With its defined 70mm length and 204008 part number, it slots cleanly into organized tooling systems where accurate replacement and consistent boring performance are priorities.
Sold In: 1 Each
