10mm x 57mm Brad Point Boring Bit, Right Hand, 10mm Shank

10mm Brad Point Boring Bit For Clean Bores

10mm brad point boring bit is a right hand cutting tool designed for accurate boring work where a clean, guided entry matters. The 10mm x 57mm brad point boring bit, right hand, 10mm shank from Amana Tool uses a brad point tip to start each hole on location, which helps reduce walking on wood surfaces during boring operations. The right hand cutting design means the bit is meant to rotate clockwise, so it matches the rotation of right hand boring machines and compatible drill presses. With a 10mm shank for boring machines, this bit fits equipment set up for 10mm tool holders, allowing it to slot into standard woodworking boring machine workflows. The 57mm length provides reach for typical cabinet and furniture boring tasks, supporting consistent depth across runs when the machine is set up properly.

Working Advantages For Wood Boring Setups

• The right hand tools rotate clockwise detail means this brad point bit lines up with standard clockwise rotation spindles on many boring machines, helping the cutting edges track correctly and reducing cutting chatter in normal operation.
• The note that left hand tools rotate counterclockwise distinguishes this bit as part of the right hand set, which simplifies tool selection when a shop runs both spindle directions and wants to keep rotation-specific bits correctly assigned.
• The boring machines (10 mm shank) statement shows this bit is built around a 10mm shank, so it fits boring machines designed for 10mm shank tools and lets installers match tool and collet sizing without mixing shank standards during a job.
• The drill presses (3/8" shank) information shows Amana Tool offers a similar brad point design in a 3/8 inch shank for drill presses, which helps shops standardize cutting geometry across machines while using the appropriate shank style on each station.

Mounting And Rotation Fit For Wood Boring

The boring machines (10 mm shank) detail defines this bit as a 10mm shank tool, so it mounts into boring machines that are set up for 10mm tooling and holds securely in those collets or chucks during production runs. The right hand tools rotate clockwise statement tells you the intended spindle direction, which keeps cutting edges presented correctly to the workpiece in right hand rotation setups. When used on drill presses with the matching design noted as drill presses (3/8" shank), the same clockwise intent applies, allowing consistent cutting behavior across both machine types. The do not use in portable drills or routers note indicates this brad point bit is meant for stationary boring machines or drill presses, aligning it with controlled, fixed-spindle environments rather than handheld use.

Using This Amana Tool Bit In Wood Shops

Where This Brad Point Boring Bit Performs Best

The 10mm x 57mm brad point boring bit, right hand, 10mm shank is positioned in the bits, blades and cutters category under boring bits, placing it squarely in dedicated wood boring applications in cabinet and woodworking shops. The product class listed as router bits connects this Amana Tool bit with cutting tooling commonly specified by professional woodworkers, making it suitable for shops that already standardize on similar cutting tools. The boring machines (10 mm shank) detail means it is aimed at multi-spindle or single-spindle boring machines that rely on 10mm shank tooling, so it fits line boring and dedicated boring operations where repeatable spacing and depth are needed. Because right hand tools rotate clockwise, this bit belongs on spindles that follow that rotation, supporting clean entry from the brad point and helping maintain bore quality across workpieces when the rest of the setup is dialed in.

Why These Rotation And Shank Details Matter

The right hand tools rotate clockwise statement is central to how this bit should be used, because correct spindle rotation keeps the cutting edges feeding into the wood and lets the brad point guide the hole rather than tearing fibers. The explicit note that left hand tools rotate counterclockwise defines a clear contrast, helping shops that stock both rotations avoid cross-use that would otherwise compromise cutting action. The 10mm shank specification on boring machines (10 mm shank) provides a repeatable interface dimension, so once a machine is set up for 10mm tooling, this bit can be swapped in without changing holders or spindles. The drill presses (3/8" shank) information shows that Amana Tool carries a parallel brad point design in a different shank size for drill presses, which helps maintain consistent hole behavior when shifting work between a boring machine and a drill press while still respecting each machine's shank standard. The manufacturer part number 201010 anchors this exact configuration, allowing shops to reference the same cutting geometry and shank size whenever they reorder or specify tooling for similar boring setups.

Common Questions About This Boring Bit

Select This Bit For Clockwise Boring Work

The 10mm x 57mm brad point boring bit, right hand, 10mm shank from Amana Tool brings a right hand, clockwise cutting pattern together with a 10mm shank aimed at boring machines used in woodworking. The brad point geometry supports guided entry into wood, which suits cabinet and furniture boring tasks where precise hole location matters. With a clearly defined manufacturer part number 201010 and a role in the bits, blades and cutters category as a boring bit, this tool fits shops that want consistent boring performance from a known configuration. For woodworkers running right hand rotation boring machines or matching drill press setups, this bit offers a defined size and rotation profile to align with existing 10mm tooling systems.