6mm x 57mm brad point boring bit is a dedicated boring bit that creates 6mm diameter holes at a 57mm overall length, so you get a consistent bore size for repeat drilling patterns in woodworking setups and cabinet work. The left hand design uses counterclockwise rotation, which matches machines set up for left hand spindles and supports balanced multi-spindle boring operations. The 10mm shank is made for boring machines that accept 10mm tooling, giving a solid grip in common line-boring and point-to-point equipment. This bit is identified by manufacturer part 301006, which ties directly to Amana Tool literature and machine setup notes for repeat ordering. The brad point tip centers the hole as drilling starts, helping the bit track accurately into wood or composite stock and reducing wandering at entry. Together these details give installers and shop teams a dedicated bit for controlled, repeatable bores.
This Amana Tool brad point boring bit is specified for boring machines with a 10mm shank interface, so it is used in fixed or multi-spindle boring equipment that clamps 10mm tooling. The same bit is also specified for drill presses with 3/8 inch shank capacity, which positions it for controlled vertical drilling where the workpiece is supported by a table and fence. The manufacturer notes that it is not for use in portable drills or routers, directing it to stationary machines where feed rate and alignment are managed by machine slides and stops. That focus on boring machines and drill presses keeps the bit working in setups where spindle alignment and work support are stable.
This 6mm x 57mm brad point boring bit is applied on boring machines built for 10mm shank bits, positioning it for line boring, system holes, or repetitive drilling on dedicated woodworking equipment. In multi-spindle arrangements that use left hand rotation, the counterclockwise cutting direction aligns with those spindles, so the bit works in stations that cannot use right hand tools. The ability to also run in drill presses with 3/8 inch shank capacity means it can cover single-hole drilling where the operator wants a fixed table and column for alignment. Because it is a router bit class product used as a boring bit, it fits well into shops that standardize on Amana Tool for cutting tools across routers and boring machines, simplifying part tracking under number 301006.
The left hand rotation means the cutting edges engage correctly only on counterclockwise spindles, which protects cut quality on machines designed for that direction and helps avoid chatter from incorrect rotation. The 10mm shank fills boring machine chucks built around that diameter, giving a snug clamping area that resists slippage under repeated cycles. The 6mm diameter dictates the final hole size, so once fences and stops are set, the operator can rely on that bore to match 6mm hardware components from panel to panel. The 57mm length gives the bit room to clear fixtures while still supporting practical drilling depths, which is important when working through stacked parts or thicker material. The brad point tip initiates contact at the center, stabilizing the bit before the outer cutters remove material, which helps maintain straight tracking through the board and cleaner edges around the hole.
This 6mm x 57mm brad point boring bit is designed for boring machines with 10mm shanks and for drill presses with 3/8 inch shank capacity, so it runs on stationary drilling equipment.
The Amana Tool brad point boring bit uses left hand rotation that cuts while turning counterclockwise, which matches left hand spindles on boring machines set up for that direction.
This boring bit is specified for boring machines and drill presses and is not for portable drills or routers, keeping it in rigid setups with guided feed and stable alignment.
The 6mm diameter on this left hand rotation boring bit produces 6mm bores that match components sized around 6mm holes, supporting consistent seating across parts.
The brad point tip on this 6mm brad point bit centers the hole before full cutting starts, helping keep the bit from wandering and supporting clean entry surfaces.
Manufacturer part 301006 identifies this specific 6mm x 57mm left hand brad point boring bit, helping shops match existing setups and reorder the same tool.
The 6mm x 57mm brad point boring bit, left hand, 10mm shank from Amana Tool gives shops a defined 6mm, counterclockwise-cutting bit for boring machines and drill presses. When a project calls for 6mm bores on left hand rotation spindles, this dedicated bit ties dimensions, length, and rotation direction into a single part number for streamlined setup. Adding this specific boring bit into the tool lineup keeps hole size, machine interface, and rotation behavior consistent across runs, supporting repeatable cabinet and woodworking production.
Sold In: 1 Each
