
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
COOKING SHEET STORAGE DIVIDER describes the Knape and Vogt TD Metal 15/16" Tray Organizer, TD18-1-W, which is identified as a cooking sheet storage divider so it organizes flat items like trays or sheets in a controlled vertical space. Being part of the TD series stationary tray dividers means this unit stays fixed in place, so stored items remain in assigned lanes every time the cabinet is used. The product is in the Base Cabinetry Organizers and Fillers class, so it is designed to create usable sections inside cabinet space rather than leaving wide open areas that waste capacity. Its role as a tray organizer within Kitchen & Bath Cabinet Accessories|Base & Wall Cabinet Pull-Out Systems means it is intended to work in typical kitchen or bath cabinet interiors, which helps installers deliver predictable storage layouts for trays and similar items.
The web description states that roll out tray dividers have an easy installation by screwing the slide bracket to the base of the cabinet, and this shows that TD series components are designed around straightforward screw-on mounting. The standard tray dividers install with 4 screws, which gives installers a clear fastening pattern that anchors the divider securely while keeping layout steps simple. Because the product sits in the Base Cabinetry Organizers and Fillers class, it is intended to integrate into cabinet interiors, so installers can plan screw locations relative to cabinet bottoms with confidence. This approach suits production shops and serious DIY work because the fastener count and base-mounted bracket method keep layout repeatable across similar cabinets.
The Knape and Vogt TD Metal 15/16" Tray Organizer, TD18-1-W, is listed under Kitchen & Bath Cabinet Accessories|Base & Wall Cabinet Pull-Out Systems, so it is intended for use in base and wall cabinet storage layouts. Its classification as a COOKING SHEET STORAGE DIVIDER means it is particularly suited to organizing cooking sheets and similar flat pieces where a narrow profile needs vertical support. Because it is a TD series stationary tray divider, it fits applications that call for fixed lanes rather than moving roll-outs, such as tall base cabinets near ovens or utility wall cabinets. Being part of the Base Cabinetry Organizers and Fillers class, it helps convert unused interior volume into structured zones that match tray dimensions.
The TD series stationary tray dividers construction means the TD18-1-W does not move with the door, so cabinet traffic does not shift divider positions, which supports predictable loading and unloading habits. The web description explains that roll out tray dividers cannot be door mounted, and this underlines that the system is planned as an interior-mounted solution where the divider structure remains independent from the door action. Standard tray dividers install with 4 screws, giving a defined anchoring scheme that reduces layout decisions and helps maintain alignment between dividers across multiple cabinet bays. The statement that roll out tray dividers have an easy installation by screwing the slide bracket to the base of the cabinet shows that the TD platform favors simple screw-and-bracket methods, which shortens install time for shops repeating the same cabinet configuration. Within Kitchen & Bath Cabinet Accessories|Base & Wall Cabinet Pull-Out Systems, this predictable installation logic helps cabinetmakers repeat the same divider spacing pattern from job to job, supporting consistent storage results for end users.
The Knape and Vogt TD18-1-W is described as a COOKING SHEET STORAGE DIVIDER, so it organizes cooking sheets and similar flat items into vertical sections inside cabinet space.
The TD18-1-W belongs to the KV TD series stationary tray dividers, so it follows the same fixed-divider concept and layout logic as other TD series components.
Standard tray dividers install with 4 screws, so installers have a defined fastening pattern that secures each divider while keeping mounting steps straightforward.
The organizer is listed under Kitchen & Bath Cabinet Accessories and Base & Wall Cabinet Pull-Out Systems, so it is intended for cabinet interiors in kitchen and bath projects.
The web description notes that roll out tray dividers have an easy installation by screwing the slide bracket to the cabinet base, highlighting a screw-on bracket method.
The web description states that roll out tray dividers cannot be door mounted, so these components are planned as interior-mounted solutions independent of the door.
The Knape and Vogt TD Metal 15/16" Tray Organizer, TD18-1-W, combines TD series stationary tray dividers design with a COOKING SHEET STORAGE DIVIDER function, so it suits projects that need fixed vertical lanes for trays. Its use of 4 screws for standard tray divider installation gives a known fastening pattern that fits shop workflows. As part of Kitchen & Bath Cabinet Accessories for base and wall cabinet pull-out systems, it aligns with cabinet interiors where organized cooking sheet storage adds value. Choosing this model lets cabinetmakers and serious DIY users apply a defined TD series layout wherever structured tray storage is required.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | FYTD12-1-FN Mfr# TD12-1-FN | Knape and Vogt TD Frosted Nickel 15/16" Tray Organizer, TD12-1-FN | ||||
Sold in: 10 Each | FYTD12-FN Mfr# TD12-FN | Knape and Vogt TD Frosted Nickel 15/16" Tray Organizer, TD12-FN | ||||
Sold in: 1 Each | FYTD18-1-FN Mfr# TD18-1-FN | Knape and Vogt TD Frosted Nickel 15/16" Tray Organizer, TD18-1-FN | ||||
Sold in: 10 Each | FYTD18-FN Mfr# TD18-FN | Knape and Vogt TD Frosted Nickel 15/16" Tray Organizer, TD18-FN |