Knape and Vogt TD Frosted Nickel 15/16" Tray Organizer, TD18-FN
Description
Knape And Vogt TD Tray Divider For Cabinet Trays
Knape and Vogt TD tray divider gives you a stationary way to separate trays inside a cabinet, so you can dedicate slots for cutting boards, baking sheets, or similar pieces without adding moving hardware. This TD series stationary tray divider works as part of a base or wall cabinet pull-out system category, fitting into jobs where you want organized vertical storage rather than stacked trays. The frosted nickel finish ties in with modern cabinet hardware lines, keeping the organizer visually consistent with other components on the job. Designated as product class Base Cabinetry Organizers and Fillers, this divider functions as a fixed partition inside roll out or standard cabinet tray spaces, supporting layouts where installers want predictable spacing. As Manufacturer Part TD18-FN, this version provides an 18 H format that aligns with common base cabinet interior heights for tray storage.
Tray Divider Details That Support Cabinet Layouts
- The TD series stationary tray dividers create fixed vertical channels for trays, so installers can plan repeatable spacing that keeps stored pieces upright inside cabinet pull-outs or static tray areas.
- The standard tray dividers install with 4 screws, which gives a rigid connection to the cabinet base and helps the divider resist shifting when trays are loaded or unloaded repeatedly.
- The roll out tray dividers cannot be door mounted, guiding installers to use them strictly inside cabinet boxes, which avoids wasted time trying to adapt them to door applications.
- Placement under Kitchen & Bath Cabinet Accessories and Base & Wall Cabinet Pull-Out Systems signals that this divider supports organized storage in those cabinet categories on shop drawings and project specs.
- Frosted nickel finish lets the divider blend with similar finished components, which helps match the visual spec in kitchens that already use frosted nickel hardware on fronts.
Tray Divider Installation And Mounting Workflow
The roll out tray dividers have an easy installation by screwing the slide bracket to the base of the cabinet, so installers work directly from the cabinet floor instead of fighting side-mount hardware. Standard tray dividers install with 4 screws, which means layout can be marked quickly, holes can be predrilled in one step, and the divider fastens in a straightforward sequence. Because the roll out tray dividers cannot be door mounted, the installer focuses on positioning them to work with existing slide hardware and tray sizes inside the box. Working in the Base Cabinetry Organizers and Fillers product class, this divider sits in the same planning conversation as pull-out systems, so layout and mounting can be coordinated during cabinet build or retrofit.
Using TD18-FN Tray Divider In Cabinet Projects
Where This 18 Inch Tray Divider Fits Best
The SAP description 18 H FROSTED NICKEL,TRAY DIVIDER,10 PACK identifies this model as an 18 H divider, so it suits cabinet interiors that accept an 18 inch high vertical element for tray storage. Positioned within Kitchen & Bath Cabinet Accessories and Base & Wall Cabinet Pull-Out Systems, it integrates into those cabinet types where vertical organization is needed behind fronts. As a TD series stationary tray divider, it stays fixed while roll out trays move beside it, allowing storage of cutting boards or baking sheets in stable channels. The frosted nickel finish coordinates with other Knape and Vogt hardware, helping designers maintain a consistent look across pull-outs and organizers specified for the same project.
Why TD Series Details Support Repeatable Results
The designation KV TD series stationary tray dividers ties this part to a known Knape and Vogt system, which helps installers and shops standardize on a family of parts when building multiple cabinets with similar tray layouts. The installation method of screwing the slide bracket to the base of the cabinet lets fabricators drill and drive from a comfortable working position, which supports accurate alignment across a run of cabinets. Using 4 screws on the standard tray dividers provides a clear fastening pattern, so installers can repeat the same layout without improvising hole locations from cabinet to cabinet. The fact that the roll out tray dividers cannot be door mounted defines their use strictly inside the cabinet box, which keeps design intent focused on interior tray organization rather than front-mounted functions. Grouping within Base Cabinetry Organizers and Fillers sets expectations that this divider contributes to internal storage planning, helping shops incorporate it logically in their hardware schedules and cut lists.
Common Questions About TD18-FN Tray Divider Use
What type of product is the TD18-FN tray divider?
The TD18-FN tray divider is a Knape and Vogt TD series stationary tray divider, so it serves as a fixed partition to organize trays inside kitchen or bath cabinet storage layouts.
How does the TD18-FN tray divider mount in the cabinet?
The TD18-FN tray divider mounts by screwing the slide bracket to the base of the cabinet, using 4 screws on the standard tray dividers for a stable, repeatable installation pattern.
Can the TD series roll out tray dividers be mounted to the door?
The TD series roll out tray dividers cannot be door mounted, so they are used strictly inside the cabinet box as part of the interior tray organization layout.
What is the height and finish of the TD18-FN divider?
The TD18-FN tray divider is described as 18 H frosted nickel, giving you an 18 inch high divider with a frosted nickel finish to coordinate with similar cabinet hardware.
Where does this tray divider fit within cabinet hardware categories?
This tray divider falls under Kitchen & Bath Cabinet Accessories and Base & Wall Cabinet Pull-Out Systems, fitting into organized storage plans for those cabinet types.
How is the TD18-FN identified for ordering and project specs?
The TD18-FN tray divider is identified by Manufacturer Part TD18-FN and SAP description 18 H FROSTED NICKEL,TRAY DIVIDER,10 PACK, which supports accurate ordering and documentation.
Selecting TD18-FN For Cabinet Tray Organization
Knape and Vogt TD tray divider TD18-FN gives cabinet shops and installers a stationary 18 H frosted nickel divider that integrates into base and wall cabinet tray layouts. With mounting by screwing the slide bracket to the base of the cabinet and using 4 screws on standard tray dividers, installation aligns with familiar shop practices. As part of the TD series stationary tray dividers, it supports predictable tray organization in Kitchen & Bath Cabinet Accessories and Base & Wall Cabinet Pull-Out Systems work.
