Amana A.G.E. 10 Inch Saw Blade For Clean Crosscuts

Amana A.G.E. 10 inch saw blade provides a 10 inch diameter cutting edge that suits common table and sliding table saw setups, so installers and shop crews can match the blade to familiar rip fences and crosscut stations. The 5/8 inch arbor mates with standard saw arbors, which supports direct mounting without extra bushings on many woodworking saws. An 80 tooth configuration is designed for finer cross-cutting and cut-off work, so cuts in hardwood, softwood, plywood and chipboard stay controlled across the full stroke. The blade belongs to the A.G.E. Series product line, giving a clear identifier when matching this circular saw blade with existing shop tooling or future reorders. As a cut-off and crosscut saw blade, it focuses on trimming and cross-grain work rather than aggressive ripping, which fits final sizing and finish passes in cabinet and millwork production.

Key Saw Blade Details For Daily Production

• The 10 inch diameter provides a familiar size for many table and sliding table saws, which helps crews move between machines without changing fence and stop setups dramatically during production runs.
• The 5/8 inch arbor specification matches a widely used arbor size on woodworking saws, so mounting the blade on many table saws stays straightforward and repeatable from one blade change to the next.
• The 80 tooth layout supports finer cut-off and crosscut operations, giving installers and fabricators a blade aimed at smoother trimming rather than fast ripping, which is useful on visible cabinet parts.
• The alternate top bevel grind (ATB) is specified for cross-cutting, cut-off and trimming, so the tooth geometry is oriented toward clean cuts across grain and through sheet goods in shop workflows.
• Use on table and sliding table saws aligns this circular saw blade with common cabinet shop equipment, allowing one blade type to handle many crosscut stations in a production environment.
• The blade is specified for hardwood, softwood, plywood and chipboard, so one setup can support mixed-material jobs that move from solid stock to panel products without a blade change.

Installation And Fit For Table And Sliding Saws

This circular saw blade is part of the A.G.E. Series, and its 10 inch diameter works within the capacity of many cabinet-grade table and sliding table saws, which keeps travel and guard geometry familiar for operators. The 5/8 inch arbor detail defines the mounting interface, giving saw operators a clear match point when selecting which saw can run the MD10-800 blade during a shift. Because the blade is described for use on table and sliding table saws, it supports both fixed table crosscutting and carriage-style panel cutting, fitting into common cabinet, fixture and millwork cutting stations. The 80 tooth count ties directly to the installation decision when a shop wants a blade focused on cut-off and crosscut tasks rather than general-purpose ripping, which tightens blade selection around trim quality.

Using The MD10-800 Blade In Woodworking Shops

Where This 10 Inch 80 Tooth Blade Performs

The MD10-800 cut off crosscut blade is specified for hardwood, softwood, plywood and chipboard, so the same blade can move from solid face-frame parts to case sides and chipboard components without a tool change between operations. On table saws, this cutoff and crosscut saw blade serves stations dedicated to trimming parts to final length, using its 80 tooth count to produce controlled cuts on end grain and along panel widths. On sliding table saws, the 10 inch diameter works with carriage travel to size plywood and chipboard pieces, giving panel processors a blade configured for the crosscut and cut-off passes those machines handle. Because the web description lists plywood and chipboard, the blade can support cabinet case and shelving components that rely on sheet goods in regular production.

Why Tooth Geometry And Application Details Matter

This A.G.E. Series circular saw blade uses an alternate top bevel grind (ATB) specified for cross-cutting, cut-off and trimming, so each tooth alternates bevel angles to slice fibers rather than simply chiseling them, which supports smoother exit edges on hardwood and softwood. The 80 tooth configuration concentrates many small bites across the cut line, which matters when trimming plywood and chipboard where panel face quality is important on visible cabinet parts. Being defined as a cutoff and crosscut saw blade, the MD10-800 helps shops separate blades for sizing and trimming from those used strictly for ripping, tightening control over cut quality in the finishing stages. The combination of 10 inch diameter, 5/8 inch arbor and ATB geometry ties directly into setup choices on table and sliding table saws, aligning machine capability, blade interface and desired trim finish in one selection.

Common Questions About The MD10-800 Cutoff Blade

Choose The Right MD10-800 Blade For Your Station

The Amana A.G.E. 10 inch saw blade brings a 10 inch diameter, 5/8 inch arbor and 80 tooth ATB layout together for cut-off and crosscut work on table and sliding table saws, which aligns with hardwood, softwood, plywood and chipboard trimming needs. By matching the MD10-800 cutoff and crosscut blade to stations focused on cross-cutting, cut-off and trimming, shops can dedicate a circular saw blade built for these tasks within their production flow.