Amana AGE 12 Inch Saw Blade For Precise Cuts
Amana AGE 12 inch saw blade is a circular saw blade designed for cut-off and crosscut work, so it handles sizing and trimming tasks where a clean finish on wood is important. The 12 inch diameter with 1 inch arbor interfaces with saws built for that larger blade size, so it fits table and sliding table saws that accept a 1 inch bore. The 80 tooth configuration works with the Alternate Top Bevel grind to create a fine crosscut, so the blade supports detailed finish cuts rather than rough ripping. The blade is specified for hardwood, softwood, plywood and chipboard, so one setup covers common sheet and solid stock in the shop. Being part of the A.G.E. Series connects this blade to a defined manufacturer line, so installers can match it by series and part number MD12-800 when reordering for consistent results.
Key Cutting Advantages In Daily Woodworking Use
- The 80 tooth design focuses many small teeth into each pass, so crosscuts and cut-offs in hardwood and softwood are smoother and need less sanding on finished parts.
- The Alternate Top Bevel grind directs tooth geometry toward slicing fibers, so plywood and chipboard cuts show reduced tear-out along the edges during sizing and trimming.
- The 12 inch diameter generates a long cutting arc, so the blade works well for trimming wider panels on table and sliding table saws used in cabinet and furniture production.
- The 1 inch arbor matches saws built around that bore size, so the blade centers securely on compatible arbor flanges for stable, repeatable crosscutting and cut-off passes.
- The MD12-800 manufacturer part number identifies this exact A.G.E. Series blade, so shops can specify or replace it accurately across multiple table or sliding saw stations.
Mounting This 12 Inch ATB Blade On Shop Saws
The 12 inch diameter with 1 inch arbor defines how this Amana A.G.E. Series circular saw blade mounts, so it is suited to table and sliding table saws equipped with a 1 inch spindle. Using a blade sized for these saw types supports the depth and reach needed for panel and component crosscutting. The Alternate Top Bevel grind is tuned for cross-cutting, cut-off and trimming, so once mounted the blade is set up for work where the cut follows the grain across, not along. Because the blade is designed for heavy production, it is intended to stay on the machine through repeated cycles, so shops can plan workflows around continuous crosscut and trim operations in hardwood, softwood, plywood and chipboard.
Where This MD12-800 Blade Fits In Woodshops
Cutoff And Crosscut Work On Table Saws
This circular saw blade is specified for use on table and sliding table saws, so it slots directly into machines that handle panel breakdown and finished length cuts. The 12 inch diameter helps the blade reach through thicker stock and wider panels, so operators can process hardwood, softwood, plywood and chipboard components at their final dimensions. Because the blade is described for heavy production, it is aligned with continuous shop use where repeated cut-off and crosscuts are common in cabinet, casework and general woodworking runs. The 80 tooth count works with the Alternate Top Bevel grind to support cross-cutting, cut-off and trimming, so mitered ends, face-frame parts and panel edges receive a clean, controlled finish right off the saw.
Why ATB Grind And Tooth Count Matter
The Alternate Top Bevel grind defines how the teeth contact the material, so each tooth slices across the grain during cross-cutting, cut-off and trimming. This slicing action is especially useful on plywood and chipboard, because it helps maintain cleaner edges where face layers or chips might otherwise fray during the cut. The 80 tooth layout puts many cutting edges into the kerf on every rotation, so the blade removes material in smaller bites and leaves a smoother face on hardwood and softwood parts. This behavior supports work where components move directly from table or sliding table saws to assembly, since the finished surface from the blade can reduce follow-up refinement on cut faces.
Common Questions About The MD12-800 Saw Blade
What materials is the Amana AGE 12 inch saw blade designed to cut?
The Amana A.G.E. Series MD12-800 saw blade is specified for hardwood, softwood, plywood and chipboard, so it covers typical solid and panel stock used in woodworking shops.
How does the ATB grind help on crosscuts and cut-offs?
The Alternate Top Bevel grind on this blade is designed for cross-cutting, cut-off and trimming, so the teeth slice wood fibers and help produce cleaner edges on finished components.
Which saw types suit the MD12-800 circular saw blade?
The MD12-800 saw blade is described for use on table and sliding table saws, so it fits machines that handle panel sizing and crosscut work in woodworking production.
What is the arbor size on this 12 inch saw blade?
This Amana A.G.E. Series blade has a 1 inch arbor, so it mounts on saws built around a 1 inch spindle and matching flanges for secure, centered rotation.
How many teeth does the MD12-800 cutoff crosscut blade have?
The MD12-800 saw blade uses 80 teeth, so it focuses on fine crosscutting where a smooth finish is useful on hardwood, softwood, plywood and chipboard parts.
What cutting roles is this circular saw blade intended to perform?
This circular saw blade is intended for cut-off, cross-cutting and trimming, so it serves sizing, length-cutting and edge-finishing roles on table and sliding table saws.
Select The Right MD12-800 Blade For Your Saw
The Amana A.G.E. Series MD12-800 circular saw blade brings a 12 inch diameter, 1 inch arbor and 80 tooth ATB layout to cut-off and crosscut work, so it fits table and sliding table saws built for that format. With suitability for hardwood, softwood, plywood and chipboard, one blade can support finish-oriented crosscuts, cut-offs and trimming across routine woodworking materials. Matching your saws to this defined part number keeps results consistent as blades rotate through heavy production duty.
