
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amana A.G.E. 12 inch saw blade is a circular saw blade designed for cut-off and crosscut work where consistent finish matters. The 12 inch diameter with 1 inch arbor centers the blade securely on compatible saws, supporting accurate rotation for straight, predictable cuts. The 60 tooth configuration works with the alternate top bevel grind to create a fine cutting action, which helps deliver smooth crosscuts instead of rough, torn edges. The blade belongs to the A.G.E. Series circular saw blades category, so it is built for woodworking use rather than general metal cutting, keeping it focused on typical shop materials. The manufacturer designation MD12-600 gives a clear part number for matching existing tooling in a production environment and for repeating the same results across multiple saw stations.
This cutoff and crosscut saw blade is intended for use on table and sliding table saws, which means the 12 inch diameter and 1 inch arbor are configured around those machines. When mounted on a table saw, the 1 inch arbor interface lets the blade sit firmly on the flange so the 60 tooth ATB pattern can track accurately through the cut line. On a sliding table saw, the same dimensions support crosscutting wider panels because the blade size works with the stroke of the sliding carriage. The MD12-600 designation connects the physical blade to documented saw setups in a shop, so repeated mounting can follow the same alignment steps for consistent cut results over time.
This cutoff and crosscut saw blade is described for hardwood, softwood, plywood, and chipboard, so it covers the typical range of wood-based materials found in woodworking shops and installation work. On hardwood, the 60 tooth count and ATB grind work together to slice across the grain, which helps limit chipping along visible edges on trim pieces and cabinet components. On softwood, the same tooth geometry supports cleaner cut-off operations on framing parts or face frames where a smoother edge reduces follow-up sanding. When used on plywood, the alternate top bevel pattern presents a slicing action to the veneer faces, helping control tear-out along the cut line. On chipboard, the tooth configuration manages the abrasive, composite makeup of the board, supporting repeatable trimming cuts for components that need consistent sizing. Across these materials, the 12 inch diameter and table or sliding table saw use keep the blade in a familiar workflow for production crews.
The alternate top bevel grind on this blade is specified for cross-cutting, cut-off, and trimming, so the tooth shape is selected to favor finish quality over aggressive ripping. That grind alternates tooth angles from side to side, which helps the blade score both sides of the kerf as it passes through wood and sheet goods. The 60 tooth count complements this grind by spacing teeth closely, so more cutting edges engage the material and share the load, which supports a smoother feed feel during production runs. The 1 inch arbor connection works with typical table and sliding table saw flanges, giving the blade a stable mounting point that helps maintain alignment between the tooth path and the fence or miter system. With the manufacturer part number MD12-600 and A.G.E. Series labeling, shops can match this exact configuration whenever they want to duplicate cut quality across multiple machines or replace a blade after extended heavy production use.
The MD12-600 saw blade is described for hardwood, softwood, plywood, and chipboard, so it fits typical woodworking materials used in cabinet, fixture, and general shop work.
The MD12-600 blade is specified for use on table and sliding table saws, aligning its 12 inch diameter and 1 inch arbor with common woodworking machinery.
The 60 tooth configuration works with the ATB grind to create a finer cutting action, supporting smoother crosscuts and trimming on hardwoods, softwoods, and sheet goods.
The alternate top bevel grind is specified for cross-cutting, cut-off, and trimming, so it shapes teeth to slice fibers from alternating sides, helping control splintering at the cut edges.
The 1 inch arbor size matches many woodworking table and sliding table saws, so the blade mounts securely on the saws those shops commonly run.
The MD12-600 part number uniquely identifies this 12 inch, 60 tooth ATB cut-off and crosscut blade, simplifying reordering and standardizing tooling across machines.
The Amana A.G.E. 12 inch diameter MD12-600 blade combines a 1 inch arbor, 60 tooth layout, and alternate top bevel grind specifically for cut-off and crosscut tasks on table and sliding table saws. Its description for hardwood, softwood, plywood, and chipboard aligns it with everyday shop materials, while the A.G.E. Series and clear part number help standardize tooling choices. For woodworking operations that prioritize consistent finish and repeatable sizing on sheet goods and solid stock, this cutoff and crosscut saw blade offers a defined configuration that can be integrated into production workflows.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AA610600 Mfr# 610600 | Amana A.G.E. 10" Diameter with 5/8" Arbor 60 Tooth ATB Cut-Off / Crosscut Saw Blade, 610600 | ||||
Sold in: 1 Each | AA612600 Mfr# 612600 | Amana A.G.E. 12" Diameter with 1" Arbor 60 Tooth ATB Cut-Off / Crosscut Saw Blade, 612600 | ||||
Sold in: 1 Each | AA616960 Mfr# 616960 | Amana A.G.E. 16" Diameter with 1" Arbor 96 Tooth ATB Cut-Off / Crosscut Saw Blade, 616960 | ||||
Sold in: 1 Each | AAMD12-800-AGE Mfr# MD12-800 | Amana A.G.E. 12" Diameter with 1" Arbor 80 Tooth ATB Cut-Off / Crosscut Saw Blade, MD12-800 | ||||
Sold in: 1 Each | AAMD10-800-AGE Mfr# MD10-800 | Amana A.G.E. 10" Diameter with 5/8" Arbor 80 Tooth ATB Cut-Off / Crosscut Saw Blade, MD10-800 | ||||
Sold in: 1 Each | AAMD10-600-AGE Mfr# MD10-600 | Amana A.G.E. 10" Diameter with 5/8" Arbor 60 Tooth ATB Cut-Off / Crosscut Saw Blade, MD10-600 |