Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top hinge is built for inset doors that sit flush inside the cabinet opening, with a self-close spring and screw-on mounting for both face-frame and frameless cabinets.
An inset door lives inside the cabinet opening rather than over it, framed by a consistent gap on every edge. Getting that gap even depends on the hinge geometry, and the full-crank arm on this hinge carries that inset position. The 35mm cup bores into the back of the door at a 13mm depth, and the arm mounts to a base plate on the cabinet, which is sold separately. The plate is Blum-specific, so pair it with a matching plate from the Blum CLIP top line. Once hung, the three-way cam adjustment lets you correct height, side, and depth independently so every door in the run lines up without shimming.
The hinge is steel with a nickel plating that coordinates naturally with the pulls, knobs, and drawer slides most designers and cabinet shops specify in the same finish. Nickel sits between the cooler tone of chrome and the warmer cast of brass, making it a flexible match across painted, stained, and natural wood cabinets. The screw-on mount adds holding strength over clip-on plates when the install calls for a fixed, non-quick-disconnect connection.
Reach for this hinge on frameless or face-frame cabinets where the design calls for a flush inset look and the finisher is fitting doors precisely to the opening. It suits furniture-quality cabinetry, built-ins, and renovation work where the visible hardware finish is coordinated across the room. Inset fitting takes tighter tolerances than overlay work, so it is the right call for shops and installers comfortable with close-clearance door hanging. For doors that overlay the cabinet side instead, an overlay hinge with the matching arm geometry is the right swap. For a cushioned, damped close rather than a spring pull, the CLIP top BLUMOTION soft-close version is the one to specify.
No. The hinge arm mounts to a base plate that is sold separately. Use a Blum CLIP top plate matched to your cabinet construction. Plates are Blum-specific and are not interchangeable with other brands.
The 95 degree arc is the designed opening for this inset geometry. It gives full practical access to the cabinet interior while keeping the door within the clearance the inset configuration requires.
No. This is a self-close hinge: the spring pulls the door shut over the last few degrees but does not cushion the close. For a damped, quiet settle, choose the BLUMOTION soft-close version of this hinge.
Yes. This hinge is rated for both frameless and face-frame cabinets. On a face-frame box, pair it with the appropriate Blum face-frame plate for the stile width and door position.
When the job calls for inset doors that close on their own and match the nickel hardware across the room, this hinge delivers the geometry, the spring action, and the finish to get there.
Sold In: 1 Each
