Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top hinge is built for half overlay doors on face-frame and frameless cabinets, with a self-close spring and a 95 degree opening angle sized for applications where a full swing would create clearance problems.
Most concealed hinges open to 110 degrees because that covers everyday cabinet access. This hinge opens to 95 degrees by design, and that distinction matters in specific situations. A cabinet installed close to a wall, beside a tall appliance, or in a run where a fully open door would swing into an adjacent door needs a controlled opening range. The 95 degree geometry keeps the door inside its clearance zone without requiring a separate restriction clip or a field modification.
The half crank arm places the door at a half overlay, which is the correct geometry when two doors meet on a shared center partition. Each door covers roughly half the partition, and the half crank keeps the arms from colliding behind the doors. The 35mm cup bores into the back of the door, and the hinge clips to a Blum base plate mounted on the cabinet. That plate is sold separately and must be a Blum plate matched to this series.
The hinge body is steel with a nickel finish. Nickel reads as a warm neutral that coordinates with a wide range of hardware finishes, from brushed chrome to light brass tones, without demanding an exact match. The screw-on mounting means the plate fastens with standard wood screws, so the install works on any cabinet side or face-frame stile regardless of whether the box has pre-drilled system holes. Three-way adjustment handles the fine work after the door is up: side, height, and depth can all be dialed in from the cam screws so the reveal stays even as the cabinet settles.
This hinge suits face-frame and frameless cabinets, so it is a practical stock item for shops and contractors who work across both construction types without wanting to carry separate SKUs. The screw-on plate is also the straightforward choice for replacement work on existing cabinets that were never line-bored for a tool-free plate system. For doors in the standard 16 to 22mm thickness range on either box type, this hinge fits the job. Doors outside that range need a thick-door or thin-door hinge instead.
One note on closing: this is a self-close hinge. The spring draws the door shut, but it does not cushion the close. For a damped, quiet finish, the BLUMOTION soft-close version in this overlay and angle is the right choice.
The 95 degree opening is the right call when a fully open door would strike a wall, hit an adjacent appliance, or collide with a neighboring door. The reduced swing is engineered clearance, not a shortcoming.
No. The hinge clips to a Blum base plate that mounts to the cabinet, and that plate is sold separately. Use a Blum plate matched to this CLIP top series. Plates from other brands will not connect to this hinge.
This hinge is self-close: a spring pulls the door shut. A soft-close hinge adds a damper that slows the door over the last few degrees so it does not slam. If a quiet, cushioned close is the goal, choose the BLUMOTION soft-close version instead.
No. Screw-on plates fasten with wood screws directly into the cabinet side or stile, so they work on any cabinet whether or not it has pre-bored 5mm system holes.
When the layout calls for half overlay doors with a limited opening and a self-close spring, this hinge delivers the geometry and a nickel finish that works across a broad range of hardware palettes.
Sold In: 1 Each
