Nickel Concealed Hinge Built for Inset Doors

This Blum CLIP top hinge is engineered for inset doors that sit flush inside the cabinet opening, with self-close and INSERTA tool-free mounting on both face-frame and frameless cabinets.

Key Features

• Self-close spring draws the door shut automatically over the last few degrees of travel.
• Inset geometry with full crank arm positions the door flush within the cabinet opening for an even reveal all around.
• 95 degree opening angle is the correct swing for inset doors, giving full access while keeping the door clear of the cabinet front.
• INSERTA tool-free mounting presses the base plate into pre-drilled 5mm system holes without screws.
• Three-way adjustment dials in height, side, and depth after hanging so the reveal stays even.
• Nickel finish on steel coordinates with brushed nickel pulls, slides, and other cabinet hardware.

Where Inset Doors Live and What They Need

An inset door sits inside the cabinet opening rather than over it. That flush, framed look is a hallmark of furniture-grade cabinetry, built-ins, and traditional kitchens where the door face lines up with the face frame. Getting there depends on precise hinge geometry: the full crank arm on this hinge carries the door back into the opening at exactly the inset position, and the 95 degree opening gives the door room to swing clear without binding on the cabinet front. The 35mm cup bores into the back of the door, and the arm clips to a Blum base plate mounted to the cabinet, ordered separately. The plate is brand-specific, so pair it with a matching Blum plate for your cabinet construction.

Steel Build in a Finish That Coordinates

The hinge body is steel in a nickel finish, the same tonal family as brushed nickel drawer pulls, knobs, and slides. Nickel sits between chrome and satin brass on the warm-cool spectrum, so it reads naturally alongside most other hardware metals in a traditional or transitional kitchen. The self-close spring pulls the door home reliably without requiring a damper, which keeps the mechanism straightforward and the part count low. Three-way adjustment means the reveal can be corrected at the hinge after installation, which matters on inset work where the tolerances are tighter than on an overlay door.

The Right Fit for This Hinge

This hinge suits face-frame and frameless cabinets in the 16 to 22mm door thickness range where the design calls for a flush inset door. It is a practical choice for cabinet shops building traditional or transitional pieces, designers specifying hardware for a flush-face look, and contractors installing custom cabinetry. INSERTA mounting requires pre-drilled 5mm system holes in the cabinet side. If those holes are not present, use the screw-on plate version of this hinge instead. For a damped, cushioned close rather than a spring pull, the CLIP top BLUMOTION version with inset geometry is the right upgrade. For doors thicker than 22mm, a thick-door hinge is needed.

Common Questions

Flush Doors That Close on Their Own

Specify this hinge when the job calls for inset doors with an even reveal, a self-closing spring, and tool-free plate mounting in a nickel finish that coordinates with the rest of the hardware.