Sugatsune swing hanger HM-330 satin stainless steel

Sugatsune Swing Hanger HM-330 For Closet Use

Sugatsune swing hanger HM-330 is a satin stainless steel swinging hanger designed as a valet-style rod for closet and organization projects. The rod is 13-7/32 inches long, creating useful hanging space while staying compact enough for standard cabinet or closet depths. The hanger is 1-1/16 inches wide, so it fits in narrow spaces while still offering a stable mounting footprint on wood panels. A stated load capacity of 6.6 pounds supports light garments or items on hangers, which suits day-to-day staging or short-term hanging needs. The stainless steel material resists typical indoor moisture and handling, so the finish stays consistent in closet or storage environments. As part of Wurth Baer Supply's shelf, closet, and garage organization category, this HM-330 swing hanger works as a functional component when planning efficient hanging zones.

Key Swinging Hanger Details For Daily Use

• The HM-330 swing hanger is made of stainless steel, which resists corrosion in normal interior conditions and keeps the satin appearance stable over regular use in closets or storage areas.
• The 13-7/32 inch long rod provides a defined hanging run, giving space for multiple garments while remaining short enough to fit inside typical cabinet depths and closet sections without interference.
• Six built-in hanger stops along the rod organize hanger spacing, helping position garments consistently so they do not slide together and keeping clothing easier to access in tight openings.
• The 1-1/16 inch width of the swinging hanger body creates a compact profile, allowing mounting on narrow stiles or side panels while still giving enough surface area for a secure installation.
• The 6.6 pound load capacity sets a clear working range for light garments or items, guiding how the hanger is used so the swinging motion remains smooth in everyday closet applications.

Installation-Focused Details For HM-330 Swing Hanger

The HM-330 swinging hanger uses stainless steel construction, so it pairs well with wood panels in closets where fasteners bite reliably into the substrate. With a 1-1/16 inch wide body, the hanger fits on cabinet sides or closet partitions without demanding large mounting surfaces, which helps when laying out tight modular sections. The 13-7/32 inch rod length positions the hanging area forward from the mounting surface, leaving working room for hangers to pivot. Six built-in hanger stops give reference points once installed, so garment positions remain repeatable each time the rod is swung out or stowed.

Using The Sugatsune HM-330 Swing Hanger In Projects

Where This Swinging Hanger HM-330 Works Best

The Sugatsune satin stainless steel swinging hanger HM-330 is classified under shelf, closet, and garage organization as a valet rod, aligning it with wardrobe and storage layouts. Its 13-7/32 inch rod length suits reach-in closets or cabinet interiors where a forward-extending hanging point is useful for staging outfits or hanging items temporarily. The 1-1/16 inch width lets the unit mount along cabinet sides, closet partitions, or narrow panels, so it adapts to different layout constraints. With six built-in hanger stops, this swing hanger supports organized spacing in projects where users repeatedly hang a small number of garments. The 6.6 pound load capacity ties the product to lighter-duty hanging tasks, such as shirts, jackets, or similar items, rather than heavy loads. Stainless steel material also matches projects where a metal component is expected to handle regular hand contact without surface degradation.

Why HM-330 Dimensions And Capacity Support Workflow

The 13-7/32 inch long rod on the HM-330 creates a predictable projection from the mounting surface, which simplifies layout when aligning with doors, shelves, or adjacent hardware in a closet system. Six built-in hanger stops provide physical indexing points along the rod, so hangers tend to stay in position when the rod is swung, reducing garment shifting and saving adjustment time. The 1-1/16 inch wide body lets installers place the swing hanger in constrained spaces, improving design flexibility while still giving enough width for stable anchoring to typical wood substrates. A defined 6.6 pound load capacity sets an operational range that protects the swinging function from excessive stress, supporting repeatable motion over ongoing use in closets or cabinets. The satin stainless steel finish also coordinates visually with other stainless hardware in organization systems, which streamlines product selection when matching visible components across a project.

Common Questions About The HM-330 Swing Hanger

Select The HM-330 Swing Hanger For Targeted Hanging

The Sugatsune swing hanger HM-330 combines a 13-7/32 inch rod, six built-in hanger stops, and a 6.6 pound load capacity to handle light garment staging in closets or cabinets. Stainless steel construction and a 1-1/16 inch wide body support stable mounting and consistent appearance. For closet, shelf, or garage organization projects that call for a compact valet-style hanging point, this HM-330 swinging hanger offers defined dimensions and performance to plan around.