Sugatsune Satin Stainless Steel Swinging Hanger 1-1/16"W x 9-23/32"D, Stainless steel, - HM-250/Y

Sugatsune Satin Stainless Steel Swinging Hanger Use

Sugatsune satin stainless steel swinging hanger is a horizontal valet-style hanger designed for closets and storage built around a 9-23/32 inch depth. The stainless steel construction supports closet environments where metal strength and corrosion resistance help the hardware stay consistent over time. The hanger folds down when needed, giving temporary hanging space without taking permanent room in front of the shelf. The swinging design fits valet-style use where garments or items are staged, then cleared when the job is finished. With a compact profile matched to the stated depth, the hanger suits projects that need added function without increasing the overall cabinet footprint. The product operates as a horizontal swinging element so it works naturally under or at the front of a shelf used for clothing or other hanging items.

Key Swinging Hanger Details For Closet Projects

• The swinging hanger depth of 9-23/32 inches defines how far garments project, which helps lay out door clearances and aisle space when planning closet interiors.
• The mounting plate size of 2-7/16 inches high by 1-1/16 inches wide concentrates load on a compact footprint, which matters when positioning the plate near shelf edges or cabinet sides.
• The swivel opening of 180 degrees allows the hanger to pivot through a full half-circle, giving access from multiple directions and simplifying how garments are presented and removed.
• The maximum shelf depth of 17-3/4 inches establishes how far back the unit can be mounted, guiding shelf design so the hanger can operate without interference behind face frames or doors.
• The satin stainless steel material creates a smooth working surface for hangers and offers corrosion resistance in everyday closet and storage conditions.

Horizontal Mounting And Swivel Operation Details

The swinging hanger is specified as horizontal, so it mounts in line with shelf depth and swings out from that axis during use. The mounting plate height of 2-7/16 inches and width of 1-1/16 inches define the required flat surface area at the mounting location, shaping how rails or shelf undersides are prepared. The 180 degree swivel opening means the arm can be positioned across a wide range, so the installer can orient the hanger toward the closet opening for loading, then return it parallel to the shelf to store it out of the way. The defined maximum shelf depth of 17-3/4 inches supports planning for cabinet dimensions that keep the hanger accessible while avoiding interference with rear panels.

Where This HM-250/Y Swinging Hanger Fits Best

Using The Swinging Hanger Under Shelves

The specified maximum shelf depth of 17-3/4 inches aligns the swinging hanger with common closet shelf sizes, so it integrates into typical residential or light commercial closet runs. Mounting the 2-7/16 inch by 1-1/16 inch plate under a shelf uses an area that is often unused, adding a pull-down hanging point without changing the basic shelf layout. The 9-23/32 inch horizontal length gives a defined reach for garments, which helps maintain a consistent distance from the closet front edge across multiple units. Because the hanger swings through 180 degrees, it can be rotated to project outward for loading and then brought alongside the shelf depth, which keeps the path clear in front of cabinets or sliding doors during normal use.

Why Spring Loaded Lift Assist Supports Workflow

The spring loaded design with a lift assist feature supports smoother folding motion, so the hanger can move between folded and down positions without abrupt drops. Pulling the knob to fold down creates a clear, single action for deployment, which speeds up staging garments during dressing, fitting, or sorting tasks. The lift assist spring works during movement, which reduces the effort needed to guide the arm and helps it return toward its stowed position when work is finished. In closets where several HM-250/Y swinging hangers are used, the consistent action from the spring mechanism helps maintain a predictable feel across units, improving day-to-day workflow around hanging, sorting, or preparing clothing.

Common Questions About The Sugatsune Swinging Hanger

Selecting This Swinging Hanger For Closet Layouts

The stainless steel construction, 9-23/32 inch depth, and 180 degree swivel opening position this Sugatsune swinging hanger for closets that need pull-down staging space without changing overall carcass depth. The specified maximum shelf depth of 17-3/4 inches aligns with many standard closet designs, simplifying layout. With a defined mounting plate size, spring loaded lift assist, and pull-to-fold knob operation, the HM-250/Y model gives installers clear dimensions and movement parameters to work into closet or cabinet drawings. Use these verified details to match the hanger to shelf depth, mounting area, and movement requirements on upcoming closet or storage projects.