Sugatsune Satin Stainless Steel Swinging Hanger 1-1/16"W x 9-23/32"D, Stainless steel, - HM-250/V

Sugatsune Swinging Hanger For Closet Workflow

Sugatsune satin stainless steel swinging hanger gives a vertical valet-style hanging point that pivots out when needed and folds away when not in use. This design creates temporary hanging space for garments or project pieces while keeping the closet front clear when the hanger is folded back. The 9-23/32 inch depth lets the hanger project far enough to clear typical hanging items, so pieces stay in front of the cabinet face rather than crowding the interior. Stainless steel construction provides a solid feel under load and resists typical closet humidity, so the hanger can stay in service without surface degradation affecting movement. As part of the valet rods category, this unit supports organized staging of clothes, uniforms, or samples in closet and storage layouts where quick access and clean lines both matter.

Key Swinging Hanger Details For Daily Use

• Spring loaded lift assist feature supports the swinging action as the arm moves, so folding and unfolding the hanger feels controlled in day-to-day use.
• Pull-the-knob fold-down operation gives a direct handhold for deployment, so users can lower the hanger quickly even when the closet is full.
• Maximum shelf depth of 17-3/4 inches sets a clear design limit, so installers can size overhead shelving confidently around this hanger.
• Mounting plate size of 2-7/16 inches high by 1-1/16 inches wide defines the required flat area, so mounting locations can be laid out accurately on panels or cabinet sides.
• 180 degree swivel opening allows the hanger arm to rotate across a wide arc, so the hanging position can be set to suit closet traffic and access patterns.

Installation Geometry And Swinging Hanger Fit

This vertical swinging hanger uses a compact mounting plate measuring 2-7/16 inches high by 1-1/16 inches wide, which concentrates load into a small footprint and suits narrow stiles or panel edges in closet interiors. The 9-23/32 inch depth defines the project-out distance from the mounting surface, helping installers coordinate with door swings and adjacent storage. A specified maximum shelf depth of 17-3/4 inches means the hanger is intended to operate beneath or beside shelving built to that reach, aligning movement clearance with common closet dimensions. The 180 degree swivel opening gives flexibility to aim the hanging arm into the room or along the cabinet run, so layouts can adapt to existing walls or return panels. This geometry-centered design supports repeatable, planned installation rather than trial-and-error placement.

Using The HM-250/V Swinging Hanger In Closets

Where This Vertical Valet Hanger Fits Best

The HM-250/V swinging hanger is categorized under shelf, closet, and garage organization with a specific focus on valet rods, positioning it as a task piece for hanging garments or items at the front of a closet zone. Its vertical orientation and 9-23/32 inch depth let it serve under a shelf or along a cabinet side in both reach-in and walk-in layouts. The specified maximum shelf depth of 17-3/4 inches ties the product directly to shelf planning, so it works in bays where that dimension is used as a standard. Satin stainless steel construction pairs visually with other stainless closet hardware, supporting consistent hardware selection in built-in projects. Within a run of storage, this hanger functions as the point where clothing, samples, or gear can be staged temporarily before or after use.

Details That Support Smooth Operation And Staging

The spring loaded lift assist feature supports the movement of the swinging arm, so raising the hanger back toward vertical is aided by the internal spring rather than relying only on user effort. That behavior helps the arm return to its stored position in a predictable way, reducing the chance of it hanging partially out of place. Pull-the-knob fold-down operation concentrates control at a single touch point, allowing users to operate the hanger even when hands are partly obstructed by clothing or storage. The 180 degree swivel opening gives a broad adjustment range, so the arm can be oriented perpendicular for direct access or swept around toward parallel alignment when space in front of the closet is limited. Together, these details let installers deliver a valet-style function that feels deliberate and repeatable in everyday use without complex adjustment steps.

Common Questions About The HM-250/V Swinging Hanger

Selecting This Swinging Hanger For Your Project

The Sugatsune satin stainless steel swinging hanger combines a 9-23/32 inch arm depth, 180 degree swivel opening, and a spring loaded lift assist into a compact HM-250/V unit sized for closets built around a 17-3/4 inch maximum shelf depth. Its defined mounting plate dimensions support straightforward layout on cabinet sides or panels, while the stainless steel construction and satin finish align with modern closet hardware choices. For projects needing a valet-style hanging point that folds away cleanly yet feels solid in daily operation, this swinging hanger offers a clearly specified option that fits defined shelf and mounting geometries.