Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Advantage Plus Two pull is a zinc die cast handle in the Advantage Series designed for cabinet and furniture applications where a 3 inch center to center hole spacing is already laid out. The brushed black nickel finish presents a dark, brushed metallic look that suits decorative hardware and moldings on cabinetry where a modern, subdued metal tone is preferred. The pull length of 5-1/4 inch spans the hand contact area so installers and users get a solid gripping surface across typical cabinet door or drawer fronts. A 1 inch projection sets the hand clearance off the face of the cabinet, giving consistent finger room while keeping the profile tight to the surface for a controlled appearance. The 1/2 inch width and 5/8 inch base diameter define the footprint on the door or drawer face, which matters when aligning with existing design lines and stile or rail dimensions.
This 3 inch center to center pull uses that fixed hole spacing so installers can line up with existing 3 inch boring patterns on face frames or slab fronts without re-drilling wider spreads. The 5-1/4 inch overall length means the handle extends beyond the screw points, making it easier to grasp from different approach angles on doors and drawers. With a 1 inch projection, the pull stands off the cabinet face far enough to clear typical finger thickness while staying close to the front, which is useful on walkways where handles should not protrude excessively. The 1/2 inch width and 5/8 inch base diameter concentrate the contact area, which is useful where stile or drawer front height is limited and layout space is tight around panel details.
This Berenson Advantage Plus Two Series pull belongs in decorative hardware and moldings projects where a 3 inch center to center pattern is standard across cabinet doors and drawers. The brushed black nickel finish positions it for installations that call for a dark, brushed metal tone rather than bright chrome or brass, so it suits contemporary or transitional cabinet runs using similar finishes. The zinc die cast material places the pull in typical interior cabinet environments where metal decorative handles are expected on wood casework, laminates, or similar surfaces. With an overall length of 5-1/4 inch and a 1 inch projection, the pull works well on medium-width drawer fronts and doors where there is room to present a visible handle without overwhelming narrow fronts.
The 1/2 inch width and 5/8 inch base diameter keep the footprint modest, so it fits on rails or edge areas where trim profiles or panel details leave limited flat area for mounting a handle. The Advantage Series identity ties it to a named collection, which matters when matching pulls across a room or coordinating with other Berenson decorative hardware items in the same visual family. The manufacturer part 0922-1BBN-P and the SAP description referencing Advantage Plus 2 and brushed black nickel give an exact identifier for cabinet shops and installers referencing job schedules or drawings.
The 3 inch center to center drilling pattern supports repeatable installations because shop jigs and boring patterns commonly use this measurement, helping installers maintain consistent spacing across doors and drawers. The zinc die cast construction delivers a uniform casting, which supports predictable contact between the pull base and the cabinet face for each installation. The brushed black nickel finish presents a consistent surface over the casting, which supports a uniform appearance across multiple pulls ordered under the same part number.
The 1 inch projection helps installers align the pull so that hands meet the same offset every time, useful when setting expectations for how far hardware stands off the cabinet face in corridor or kitchen runs. The 5-1/4 inch overall length gives layout points for centering on drawer fronts or stiles, simplifying dimensioning from edges when marking screw holes. The screw size 8-32 x 1 inch matches a common cabinet hardware standard, allowing installers who work with this thread size to integrate the pull into typical shop drilling and assembly workflows.
The Berenson Advantage Plus Two pull has a 3 inch center to center measurement, which lines up with many existing cabinet boring patterns for straightforward replacement or new layout.
The pull length is 5-1/4 inch, giving extra handle span beyond the screw holes so users have more gripping area on cabinet doors and drawers.
This brushed black nickel pull has a 1 inch projection, spacing the grip off the cabinet face for finger clearance while keeping the profile compact.
The 0922-1BBN-P cabinet pull is made from zinc die cast, providing a metal body suited to typical interior cabinet handle applications.
This cabinet handle uses screw size 8-32 x 1 inch, which corresponds to a common cabinet hardware thread and length standard.
This Advantage Series cabinet hardware uses a brushed black nickel finish, giving a dark, brushed metallic look that coordinates with similar black nickel components.
The Berenson Advantage Plus Two pull with 3 inch center to center spacing, 5-1/4 inch overall length, and 1 inch projection offers defined dimensions that tie into standard cabinet drilling and layout. The zinc die cast construction and brushed black nickel finish match the Advantage Series description, which aligns with decorative hardware and moldings work where a consistent collection is preferred. For projects needing this specific 0922-1BBN-P configuration, this handle aligns with common cabinet hole patterns and finish expectations for coordinated runs.
Sold In: 1 Each
