Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Westerly appliance pull describes a zinc die-cast handle from Amerock Corporation designed as an appliance pull in the Westerly Series. The 12 inch (305 mm) center-to-center dimension sets the mounting hole spacing, which matters when laying out or replacing pulls on paneled appliances or large cabinet doors.
The satin nickel finish defines the visual look, pairing with other satin nickel decorative hardware in a job for a consistent appearance. The stated length of 13-13/16 inches (351 mm) shows the full bar span, which helps with proportion on taller doors and wider appliance panels.
The 1-15/16 inch (49 mm) projection identifies how far the pull stands off the front, giving hand clearance during regular use. The width of 19.6 mm and base dimensions of 1-3/16 inch (30 mm) by 3/4 inch (19 mm) describe the footprint, which is useful when covering existing marks on a door face.
The 12 inch center-to-center measurement defines where mounting holes land relative to door or panel edges, which is important when aligning multiple pulls in a bank of tall cabinets or matching existing drilling patterns. The 10-24 x 3/4 inch screw size specifies the thread and length interface at each mounting point, guiding hole preparation and thread engagement into the door or appliance panel material.
The 1-15/16 inch projection indicates stand-off from the surface, which affects how hands clear surrounding trim or adjacent doors during use. The base footprint dimensions help when laying out the pull over finished surfaces, because they indicate how much area each end cap covers on painted, laminated, or wood fronts.
The Amerock Westerly Series satin nickel 12 inch center-to-center appliance pull is identified in the product class as an appliance pull, which positions it for paneled appliances or large cabinet doors that benefit from a longer grip. The specified length of 13-13/16 inches gives a substantial handle span, which aligns visually with tall pantry doors or full-height appliance panels.
The satin nickel finish ties this pull to satin nickel decorative hardware and moldings, allowing the same tone to run across handles and pulls within a space. The width of 19.6 mm defines the bar thickness across the front, which affects how the pull reads against door stile widths and appliance trim lines in a run of cabinetry.
The base length of 1-3/16 inch and base width of 3/4 inch describe each mounting pad, which is useful when positioning the pull relative to door rails or panel profiles. As part of the Westerly Series, this pull follows the same line identity referenced as retro with an industrial twist on classic urban lines, creating continuity when other Westerly pieces appear nearby.
The 12 inch center-to-center dimension gives a fixed reference for drilling jigs or CNC programs, which supports consistent alignment when the same pull repeats across multiple doors or appliance fronts. The 10-24 x 3/4 inch screw size defines a standard machine thread, which guides thread tapping or selection of matching inserts in dense door materials.
The 1-15/16 inch projection controls how far the front of the pull sits off the door, which helps maintain clearance from adjacent cabinetry faces and reduces the chance of knuckles contacting the surface during operation. The zinc die-cast construction provides a formed body that keeps the stated profile, which aids in keeping visual lines uniform across several pulls.
The overall length of 13-13/16 inches and 19.6 mm width set the visible bar proportions, which helps installers and designers line up the pull with rail heights and panel reveals for a balanced look. The base dimensions assist when laying the pull across stile-and-rail doors, because they show how much flat area is needed for a flush, stable mount.
The Amerock Westerly appliance pull uses a 12 inch (305 mm) center-to-center spacing, which sets the exact distance between mounting holes for layout or replacement work.
The pull measures 13-13/16 inches (351 mm) in overall length, which helps match the handle length to tall doors or wide appliance panels for proportional hardware placement.
The BP54023G10 appliance pull is made from zinc die-cast material, which provides a consistent molded form that aligns with other zinc die-cast decorative hardware.
The pull projects 1-15/16 inches (49 mm) from the surface, which defines hand clearance and the stand-off distance from doors or appliance panels.
The Amerock BP54023G10 pull uses 10-24 x 3/4 inch screws, giving a specific machine thread and length for mounting into prepared holes.
The Westerly Series cabinet pull has a satin nickel finish, which coordinates with other satin nickel decorative hardware on the same project.
The Amerock Westerly Series satin nickel 12 inch center-to-center appliance pull, BP54023G10, ties together defined measurements, zinc die-cast construction, and a satin nickel finish for cabinet and appliance applications. These verified dimensions give clear mounting, clearance, and visual proportion data for layout on tall pantry doors and paneled appliances.
Using the stated center-to-center spacing, projection, and base sizes, this pull can be specified where a longer handle length is desired across coordinated satin nickel decorative hardware.
Sold In: 1 Each
