Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Westerly appliance pull is a zinc die-cast appliance pull in the Westerly collection with a graphite finish, so it delivers a consistent look when you are matching hardware across a kitchen or built-in run. The 18 inch (457 mm) center-to-center dimension defines the mounting hole spacing, which keeps layout straightforward on appliance panels and tall doors designed for this size. Overall length of 19-15/16 inches (506 mm) gives the pull visual weight on larger fronts, which helps proportion hardware to full-height panels. A projection of 2 inches (51 mm) sets the gripping surface off the face, creating room for a comfortable handhold during daily use. The 7/8 inch (22 mm) width keeps the profile slim while still giving enough surface for a solid grip when opening heavier doors.
The 18 inch (457 mm) center-to-center spacing sets the exact distance between mounting points, so drilling can be laid out accurately before mounting this pull on a panel or door. The base length of 1-5/16 inches (33 mm) defines the footprint at each mounting point, which helps when checking space near panel edges, stiles, or adjacent trim. A base width of 7/8 inch (22 mm) shows how much surface area each end covers, which can help when aligning the pull over filled holes or seams in custom panels. The stated projection of 2 inches (51 mm) positions the grip away from the surface, which can assist clearance when doors sit proud of surrounding cabinetry or when thicker door panels are used.
The Westerly collection identity ties this pull to other Westerly pieces, so it works well in projects where matching cabinet and appliance hardware is important. Its classification as an appliance pull positions it for use on appliance panels or larger doors rather than on small drawers, helping keep scale consistent across the installation. The graphite finish brings a dark, defined look to faces and panels, which can coordinate with graphite-toned hinges, knobs, or adjacent decorative hardware from the same color family. Because the overall length is 19-15/16 inches (506 mm), this pull visually anchors taller fronts, which can support a balanced appearance on floor-to-ceiling installations.
The 18 inch (457 mm) center-to-center dimension provides a clear drilling standard, which supports repeatable hole placement across multiple doors or panels in a run. The 1-5/16 inch (33 mm) base length at each end concentrates the mounting area, which can help when aligning the pull with door stile widths or decorative rail details. Base width of 7/8 inch (22 mm) defines the side-to-side bearing surface, which can cover small imperfections around the mounting holes once the pull is fastened. The zinc die-cast construction contributes to uniform screw engagement at each mounting point, which supports consistent fastening torque. The 2 inch (51 mm) projection keeps the handgrip offset from the face, which can improve leverage when operating heavier appliance fronts repeatedly throughout the day.
The Amerock BP54024GPH pull has an 18 inch (457 mm) center-to-center measurement, so mounting holes are drilled on that spacing for proper fit.
The BP54024GPH appliance pull has an overall length of 19-15/16 inches (506 mm), giving it a long profile suitable for tall doors or appliance panels.
The Amerock Westerly appliance pull projects 2 inches (51 mm) from the mounting surface, providing space for fingers between the handle and the door.
The Westerly BP54024GPH appliance pull is made from zinc die-cast, giving it a solid metal body with consistent dimensions for repetitive installations.
The Amerock Westerly 18 inch appliance pull has a graphite finish, providing a dark, defined appearance that coordinates with other graphite hardware.
The Amerock BP54024GPH pull has a base length of 1-5/16 inches (33 mm) and a base width of 7/8 inch (22 mm), describing the footprint at each mounting point.
The Amerock Westerly appliance pull in graphite pairs an 18 inch (457 mm) center-to-center layout with a 19-15/16 inch (506 mm) overall length, so it suits full-size appliance or tall door applications. Zinc die-cast construction and a 2 inch (51 mm) projection support comfortable everyday operation on heavier fronts. Matching base dimensions of 1-5/16 inches (33 mm) by 7/8 inch (22 mm) at each end simplify layout along stiles or panel edges. For graphite-finished projects using the Westerly collection look, this pull offers a defined size and finish for consistent hardware planning.
Sold In: 1 Each
