Amerock Conrad Knob Satin Nickel For Cabinets

Amerock Conrad knob satin nickel describes a decorative cabinet knob from the Conrad collection designed for kitchen or bath use. The knob measures 1-1/2 in (38 mm) in length, so it spans enough surface to grip firmly on drawers or doors. Its 1/2 in (13 mm) width keeps the profile slim, which helps when aligning multiple pulls on narrow rails or smaller fronts. A projection of 1-1/16 in (27 mm) sets the pull point comfortably off the face, giving fingers room without reaching too far into the room. The satin nickel finish provides a muted metallic look that works with contemporary and transitional styles, supporting consistent hardware coordination across a project. Constructed from zinc die-cast material, the knob offers a solid feel when operated, which helps doors and drawers close with a controlled, positive pull every time.

Key Conrad Collection Details For Project Planning

• The Conrad collection design uses clean flowing lines with strong edges, which creates a contemporary and transitional look that ties together varied cabinet door styles in one job.
• The 1-1/2 in (38 mm) length gives each knob a defined footprint on the face, which helps cover previous impressions when replacing smaller pulls on existing cabinetry.
• The 1/2 in (13 mm) width keeps the knob visually light, which is useful when laying out multiple pulls on narrow drawer fronts or slim face frames.
• The 1-1/16 in (27 mm) projection sets a consistent hand clearance, helping installers maintain an even stand-off line across doors and drawers on longer runs.
• The satin nickel finish coordinates with other satin nickel decorative hardware, which simplifies matching hinges, pulls, and faucets within a single space.
• The zinc die-cast construction provides a solid-feeling pull point, which supports everyday cabinet use in busy kitchen and bath environments.

Cabinet Knob Fit, Dimensions, And Screw Interface

This Amerock cabinet knob is part of the Conrad collection and is designed around a standard 8-32 screw interface, which fits into common cabinet knob mounting holes tapped for that thread. The specified screw size is 8-32 x 1 in, which suits typical cabinet door and drawer front thicknesses where a 1 in fastener reaches the knob without excessive protrusion. With a 1-1/2 in (38 mm) length and 1/2 in (13 mm) width, the knob can be centered cleanly on stile or drawer layouts without crowding neighboring hardware. The 1-1/16 in (27 mm) projection keeps hands clear of the door or drawer surface, which reduces contact marks around the knob area during repeated use.

Using The Conrad Series Knob In Real Projects

Where This Conrad Collection Knob Works Best

The Conrad collection is described as inspired by a resurgence of contemporary and transitional kitchen design, which positions this knob for residential kitchen and bath cabinetry where clean lines are desired. Its 1-1/2 in (38 mm) length helps on face frames and slab fronts, giving a clear pull point on doors of varied widths. At 1/2 in (13 mm) wide, the knob suits narrower rails, so it can be aligned with other decorative hardware without overlapping into panel details. The satin nickel finish supports use with stainless or brushed fixtures, tying together faucets, appliances, and cabinet hardware in one visual theme. Because the knob is made from zinc die-cast material, it provides a consistent feel across all openings in a room, which is important when multiple cabinets are operated throughout the day.

Details That Support Consistent Layout And Operation

The 1-1/16 in (27 mm) projection defines how far this knob stands off the cabinet surface, which helps installers maintain a straight visual line of knob faces along upper and lower runs. Using the standard 8-32 screw interface lets the knob seat securely on prepared cabinet fronts, which supports repeatable installation across many doors and drawers in a project. The 1-1/2 in (38 mm) length and 1/2 in (13 mm) width balance each other, resulting in a pull point that is easy to grasp from different angles, reducing fumbling when opening heavier drawers. The satin nickel finish adds a subtle sheen that minimizes the appearance of minor handling marks compared to highly polished surfaces. Tying these details together, the Amerock BP29203G10 part number identifies a specific Conrad series knob, helping project documents call out the same component wherever it is used.

Common Questions About The Amerock Conrad Cabinet Knob

Selecting This Conrad Knob For Your Next Job

The Amerock Conrad series satin nickel knob BP29203G10 combines a 1-1/2 in (38 mm) length, 1/2 in (13 mm) width, and 1-1/16 in (27 mm) projection with an 8-32 screw interface, giving installers a clearly defined component for contemporary or transitional kitchen and bath cabinet hardware layouts.