Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Platin 6 inch 500 grit sanding disc is a foam-backed, silicon carbide abrasive designed for high-gloss finishes on closed surface materials, so it supports fine finishing where a uniform, polished surface is critical. The 500 grit rating delivers a super-fine cut that refines existing finish coats, which matters when stepping through final sanding stages without cutting through. The 6 inch diameter with a hook and loop backing pairs to compatible backing pads for quick disc changes, helping keep finishing workflows moving without long changeover time. The no hole design spreads the contact area evenly across the surface, which helps maintain consistent scratch patterns on solid surface, fiberglass, plastics, fillers, and finish coats. A stearate coating on the silicon carbide abrasive reduces loading during sanding, so the disc continues cutting smoothly across dense, closed finishes.
This 6 inch hook and loop sanding disc mounts to compatible hook and loop backing pads, so it stays secure during sanding while remaining easy to remove when worn. The foam-backed design conforms slightly to the surface under tool pressure, which helps the abrasive follow minor contours on fillers, finish coats, solid surface, fiberglass, and plastics. The no hole layout presents a continuous abrasive face to the work, which supports even contact and a predictable scratch pattern during super-fine finishing. With its 500 grit silicon carbide abrasive and stearate coating, the disc is suited to final sanding steps on closed surface materials, where controlled stock removal and surface refinement are important for a high-gloss result.
This Festool Platin foam-backed disc was specially developed for high-gloss finishes on closed surface materials, so it fits naturally into workflows that target polished, reflective results on finished parts. On fillers, the silicon carbide abrasive smooths minor tool marks and blends patched areas, which prepares the surface for subsequent finish coats without aggressive stock removal. On finish coats, the 500 grit cut refines the existing film, which helps installers level slight nibs and marks while still supporting a clear, uniform top appearance. On solid surface materials, the foam backing allows the disc to follow subtle seams and edges, which contributes to a continuous sheen across joins. When used on fiberglass and plastics, the open coated structure and stearate layer help limit loading, which keeps the abrasive face working longer as it fine-sands resin-rich areas.
The foam-backed construction works with the hook and loop mounting to maintain stable but cushioned contact, which supports repeatable surface results across multiple panels or parts. Because the disc uses silicon carbide with a stearate coating in an open coated design, it manages fine dust from closed surface materials in a controlled way, which reduces the need to stop frequently to address abrasive clogging. The 500 grit grading narrows the disc to super-fine finishing roles, which simplifies grit selection when outlining a sanding sequence toward high-gloss targets. The no hole design keeps the full 6 inch face in play, which helps operators read and predict the scratch pattern as they move over fillers, finish coats, solid surface, fiberglass, and plastics. Sold in full box quantities only, the disc format supports stocking for repeated finishing runs where consistent material and performance are important.
The Festool Platin 6 inch 500 grit sanding disc is designed for fillers, finish coats, solid surface, fiberglass, and plastics, so one abrasive type can service several common finishing materials.
The foam-backed design cushions the silicon carbide abrasive against the work, helping it conform slightly and produce smoother contact on high-gloss, closed surface materials.
The 500 grit rating delivers a super-fine cut that refines previous sanding scratches, supporting high-gloss finishes on fillers, finish coats, solid surface, fiberglass, and plastics.
The no hole design provides a continuous abrasive face, supporting even contact and a consistent scratch pattern when performing fine finishing steps.
The stearate coating on the silicon carbide abrasive reduces loading on closed surface materials, helping the disc keep cutting smoothly over longer passes.
This Platin disc uses a hook and loop backing, allowing straightforward attachment to compatible 6 inch pads and quick disc changes between sanding operations.
The Festool Platin 6 inch 500 grit sanding disc combines foam backing, silicon carbide abrasive, stearate coating, and a no hole face to support super-fine finishing on fillers, finish coats, solid surface, fiberglass, and plastics. With hook and loop mounting and a focus on high-gloss results, it fits finishing sequences that demand controlled, predictable surface refinement across multiple closed surface materials. For shops and installers working toward polished finishes on these substrates, choosing this full box format aligns one abrasive with a defined role in the high-gloss sanding process.
Sold In: 1 Box