Festool Platin 6 inch 400 grit sanding disc is a foam-backed, silicon carbide based abrasive disc designed for high gloss finishes, so it supports fine finishing steps where surface quality is critical before polishing or buffing. The 6 inch diameter disc uses a hook and loop attachment, which allows quick disc changes and secure grip on compatible backing pads during extended sanding passes. The foam backing sits between the abrasive and the pad, letting the disc conform to minor surface variations and helping produce an even contact patch on flat or slightly contoured closed surface materials. The 400 grit, super-fine abrasive creates a very smooth scratch pattern, which matters when preparing fillers, finish coats, solid surface, fiberglass, or plastics for the next finishing step. A stearate coating is part of the abrasive construction, supporting sanding on these materials while maintaining the high-gloss-ready surface.
The hook and loop backing on this 6 inch Platin sanding disc allows the disc to be pressed onto and pulled off a compatible hook and loop pad, which streamlines grit changes during multi-step finishing sequences. Because the disc is foam-backed, it can bridge small surface undulations on fillers or finish coats, helping the abrasive maintain uniform contact without digging at edges. The 400 grit silicon carbide grain leaves a fine, uniform scratch pattern, so subsequent polishing or topcoat steps can build a high gloss appearance on closed surface materials. The open coated abrasive structure is part of the disc makeup, working together with the stearate coating to support sanding on finish coats, solid surface, fiberglass, and plastics without overloading as quickly in those applications.
This Festool Platin abrasive disc was specially developed for high gloss finishes on closed surface materials, so it fits finishing stages where sheen and reflection are important. On fillers, the 400 grit cut smooths repaired areas, helping blend patches into surrounding finish-ready surfaces. When used on finish coats, the silicon carbide abrasive refines the surface to a super-fine level that supports subsequent high-gloss finishing steps. In solid surface work, the foam backing and fine grit help produce a uniform matte base that can be polished toward gloss. On fiberglass and plastics, the stearate-coated, open coated abrasive design supports controlled material removal while preparing these substrates for final finishing.
The foam-backed construction of this Platin disc allows the abrasive to follow minor variations across the work area, which supports repeatable, even finishes over broad panels or contoured sections. The silicon carbide, synthetic resin bonded grain is engineered as part of a high-gloss finishing system, so each pass contributes a predictable, fine scratch pattern that is suitable for later polishing. The open coated structure and stearate coating reduce loading tendencies on finish coats, solid surface, fiberglass, and plastics, helping the disc maintain its cutting character over more of the sanding cycle. Because this disc is purpose-built for super-fine finish work, installers and fabricators can slot it into the final sanding stages of their process when preparing closed surface materials for a high gloss appearance.
The Festool Platin 6 inch 400 grit sanding disc is described as ideal for fillers, finish coats, solid surface, fiberglass, and plastics, so it targets those materials in fine finishing stages.
The foam-backed construction lets the disc conform to surface variations, promoting more even pressure and consistent scratch patterns on closed surface materials during high-gloss preparation.
The 400 grit rating provides a super-fine finish, creating a smooth, uniform scratch pattern that supports later polishing or finishing steps aimed at a high gloss appearance.
The stearate coating is part of the abrasive design for high-gloss finishes on closed surface materials, supporting effective sanding on finish coats and similar substrates.
The hook and loop backing allows quick attachment and removal from a compatible pad, which supports efficient grit changes during multi-step finishing work.
Open coated describes part of the abrasive structure, which works with the stearate coating to support sanding on finish coats, solid surface, fiberglass, and plastics.
The Festool Platin 6 inch 400 grit sanding disc combines foam backing, silicon carbide grain, and a stearate-coated, open coated structure, giving finishers a super-fine abrasive aimed at high gloss work on fillers, finish coats, solid surface, fiberglass, and plastics. For shops standardizing their finishing systems, this disc fits the super-fine stage of sanding closed surface materials before polishing or final high-gloss steps. Wurth Baer Supply offers this Festool Platin abrasive disc in full box quantities, so production environments can stock a consistent high-gloss finishing abrasive across multiple workstations.
Sold In: 1 Box