Festool Platin 6 inch sanding disc is a foam-backed, silicon carbide based abrasive disc designed for super-fine work on high gloss finishes. The 1,000 grit surface levels minor imperfections while leaving a very fine scratch pattern, which supports high-gloss polishing steps on closed surface materials. The hook and loop backing lets the disc attach and remove quickly from compatible 6 inch sanding pads, helping crews change grits fast during multi-step finishing. A stearate coating on the abrasive reduces clogging during use, which helps the disc cut more consistently on fillers and finish coats across larger areas. Being part of Festool Platin, this disc is specially developed for high-gloss finishes, so finishers can match it confidently to demanding final-surface work on solid surface, fiberglass and plastics where uniform appearance matters.
This Festool Platin disc uses a hook and loop backing on a 6 inch diameter, so it mates with 6 inch hook and loop sanding pads in abrasive disc systems. The no hole configuration gives a full abrasive face across the pad, which focuses contact on the surface when dust extraction through the disc is not required by the process. The foam-backed body helps the disc sit evenly across minor surface variations, which supports a controlled, even cut on closed surface materials. As an abrasive disc from the abrasives class, it fits into finishing workflows where super-fine sanding before polishing is needed on fillers, finish coats, solid surface, fiberglass and plastics.
This Platin 1000 grit foam sanding disc is specially developed for high-gloss finishes on closed surface materials, so it fits naturally at the upper end of a sanding sequence before buffing or polishing. On fillers and finish coats, the silicon carbide grain refines previous sanding steps, which supports a smooth base for clear or color coats that need an even reflection. On solid surface, the disc helps remove fine scratches and blend repair areas, which is important when seams or touchups must disappear into the surrounding sheet. When used on fiberglass, the open coated abrasive structure lets dust clear more easily from the disc face, which helps maintain an even cut across fairing or cosmetic layers. On plastics, the synthetic resin bonded silicon carbide cuts cleanly at this fine grit level, which supports clarity and reduces the chance of deep scratches that would telegraph through a polished finish.
The foam-backed construction under the abrasive lets the disc follow slight contours without digging, which helps installers and refinishers maintain a flat, uniform finish on panels and molded parts. The hook and loop 6 inch sanding disc connection speeds changes between discs, which is important when operators step through several grits during repair or finishing runs. The stearate coating works with the open coated abrasive layout to resist loading, which keeps the cutting action more predictable from the first pass to the last on larger surfaces. As a Festool silicon carbide sanding disc with a defined 1,000 grit rating, it gives finishing teams a repeatable step in their process map, which simplifies training and helps produce consistent high-gloss outcomes across different jobs and materials.
This Festool Platin disc uses silicon carbide abrasive, which cuts sharply at fine grits and supports super-fine finishing on fillers, finish coats, solid surface, fiberglass and plastics.
The foam-backed construction lets the disc conform slightly to the surface, which reduces pressure points and helps produce a smoother, more uniform finish on high-gloss work.
The disc is 1,000 grit, which provides a super-fine scratch pattern suited to high-gloss finishing steps and preparation for polishing on closed surface materials.
The stearate coating reduces material buildup on the abrasive surface, which helps the disc maintain more consistent cutting action over larger areas and extended sanding passes.
This Platin disc is described as ideal for super-fine finishing on fillers, finish coats, solid surface, fiberglass and plastics, which positions it for a range of high-gloss applications.
The disc has a hook and loop backing, which allows quick attachment and removal from compatible 6 inch sanding pads during multi-step finishing workflows.
Festool Platin 6 inch sanding disc pairs a 1,000 grit silicon carbide abrasive with a foam-backed, hook and loop format, which fits super-fine finishing stages on fillers, finish coats, solid surface, fiberglass and plastics. When high-gloss results on closed surface materials are the goal, this disc provides a defined, repeatable abrasive step that supports consistent, professional outcomes.
Sold In: 1 Box